1 /* 2 * (C) Copyright 2006-2008 3 * Texas Instruments. 4 * Richard Woodruff <r-woodruff2@ti.com> 5 * Syed Mohammed Khasim <x0khasim@ti.com> 6 * 7 * (C) Copyright 2012 8 * Corscience GmbH & Co. KG 9 * Thomas Weber <weber@corscience.de> 10 * 11 * Configuration settings for the Tricorder board. 12 * 13 * SPDX-License-Identifier: GPL-2.0+ 14 */ 15 16 #ifndef __CONFIG_H 17 #define __CONFIG_H 18 19 /* High Level Configuration Options */ 20 #define CONFIG_OMAP /* in a TI OMAP core */ 21 #define CONFIG_OMAP34XX /* which is a 34XX */ 22 #define CONFIG_OMAP_COMMON 23 24 #define CONFIG_MACH_TYPE MACH_TYPE_TRICORDER 25 /* 26 * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM 27 * 64 bytes before this address should be set aside for u-boot.img's 28 * header. That is 0x800FFFC0--0x80100000 should not be used for any 29 * other needs. 30 */ 31 #define CONFIG_SYS_TEXT_BASE 0x80100000 32 33 #define CONFIG_SDRC /* The chip has SDRC controller */ 34 35 #include <asm/arch/cpu.h> /* get chip and board defs */ 36 #include <asm/arch/omap3.h> 37 38 /* Display CPU and Board information */ 39 #define CONFIG_DISPLAY_CPUINFO 40 #define CONFIG_DISPLAY_BOARDINFO 41 42 #define CONFIG_SILENT_CONSOLE 43 #define CONFIG_ZERO_BOOTDELAY_CHECK 44 45 /* Clock Defines */ 46 #define V_OSCK 26000000 /* Clock output from T2 */ 47 #define V_SCLK (V_OSCK >> 1) 48 49 #define CONFIG_MISC_INIT_R 50 51 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 52 #define CONFIG_SETUP_MEMORY_TAGS 53 #define CONFIG_INITRD_TAG 54 #define CONFIG_REVISION_TAG 55 56 #define CONFIG_OF_LIBFDT 57 58 /* Size of malloc() pool */ 59 #define CONFIG_SYS_MALLOC_LEN (1024*1024) 60 61 /* Hardware drivers */ 62 63 /* GPIO support */ 64 #define CONFIG_OMAP_GPIO 65 66 /* LED support */ 67 #define CONFIG_STATUS_LED 68 #define CONFIG_BOARD_SPECIFIC_LED 69 #define CONFIG_CMD_LED /* LED command */ 70 #define STATUS_LED_BIT (1 << 0) 71 #define STATUS_LED_STATE STATUS_LED_ON 72 #define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) 73 #define STATUS_LED_BIT1 (1 << 1) 74 #define STATUS_LED_STATE1 STATUS_LED_ON 75 #define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2) 76 #define STATUS_LED_BIT2 (1 << 2) 77 #define STATUS_LED_STATE2 STATUS_LED_ON 78 #define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 2) 79 80 /* NS16550 Configuration */ 81 #define CONFIG_SYS_NS16550 82 #define CONFIG_SYS_NS16550_SERIAL 83 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 84 #define CONFIG_SYS_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ 85 86 /* select serial console configuration */ 87 #define CONFIG_CONS_INDEX 3 88 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 89 #define CONFIG_SERIAL3 3 90 #define CONFIG_BAUDRATE 115200 91 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 92 115200} 93 94 /* MMC */ 95 #define CONFIG_GENERIC_MMC 96 #define CONFIG_MMC 97 #define CONFIG_OMAP_HSMMC 98 #define CONFIG_DOS_PARTITION 99 100 /* I2C */ 101 #define CONFIG_SYS_I2C 102 #define CONFIG_SYS_OMAP24_I2C_SPEED 100000 103 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 104 #define CONFIG_SYS_I2C_OMAP34XX 105 106 107 /* EEPROM */ 108 #define CONFIG_SYS_I2C_MULTI_EEPROMS 109 #define CONFIG_CMD_EEPROM 110 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 111 #define CONFIG_SYS_EEPROM_BUS_NUM 1 112 113 /* TWL4030 */ 114 #define CONFIG_TWL4030_POWER 115 #define CONFIG_TWL4030_LED 116 117 /* Board NAND Info */ 118 #define CONFIG_SYS_NO_FLASH /* no NOR flash */ 119 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 120 #define MTDIDS_DEFAULT "nand0=omap2-nand.0" 121 #define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:" \ 122 "128k(SPL)," \ 123 "1m(u-boot)," \ 124 "384k(u-boot-env1)," \ 125 "1152k(mtdoops)," \ 126 "384k(u-boot-env2)," \ 127 "5m(kernel)," \ 128 "2m(fdt)," \ 129 "-(ubi)" 130 131 #define CONFIG_NAND_OMAP_GPMC 132 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ 133 /* to access nand */ 134 #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ 135 /* to access nand at */ 136 /* CS0 */ 137 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ 138 /* devices */ 139 #define CONFIG_BCH 140 #define CONFIG_SYS_NAND_MAX_OOBFREE 2 141 #define CONFIG_SYS_NAND_MAX_ECCPOS 56 142 143 /* commands to include */ 144 #include <config_cmd_default.h> 145 146 #define CONFIG_CMD_EXT2 /* EXT2 Support */ 147 #define CONFIG_CMD_FAT /* FAT support */ 148 #define CONFIG_CMD_I2C /* I2C serial bus support */ 149 #define CONFIG_CMD_MMC /* MMC support */ 150 #define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ 151 #define CONFIG_CMD_NAND /* NAND support */ 152 #define CONFIG_CMD_NAND_LOCK_UNLOCK /* nand (un)lock commands */ 153 #define CONFIG_CMD_UBI /* UBI commands */ 154 #define CONFIG_CMD_UBIFS /* UBIFS commands */ 155 #define CONFIG_LZO /* LZO is needed for UBIFS */ 156 157 #undef CONFIG_CMD_NET 158 #undef CONFIG_CMD_NFS 159 #undef CONFIG_CMD_FPGA /* FPGA configuration Support */ 160 #undef CONFIG_CMD_IMI /* iminfo */ 161 #undef CONFIG_CMD_JFFS2 /* JFFS2 Support */ 162 163 /* needed for ubi */ 164 #define CONFIG_RBTREE 165 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 166 #define CONFIG_MTD_PARTITIONS 167 168 /* Environment information (this is the common part) */ 169 170 #define CONFIG_BOOTDELAY 0 171 172 /* hang() the board on panic() */ 173 #define CONFIG_PANIC_HANG 174 175 /* environment placement (for NAND), is different for FLASHCARD but does not 176 * harm there */ 177 #define CONFIG_ENV_OFFSET 0x120000 /* env start */ 178 #define CONFIG_ENV_OFFSET_REDUND 0x2A0000 /* redundant env start */ 179 #define CONFIG_ENV_SIZE (16 << 10) /* use 16KiB for env */ 180 #define CONFIG_ENV_RANGE (384 << 10) /* allow badblocks in env */ 181 182 /* the loadaddr is the same as CONFIG_SYS_LOAD_ADDR, unfortunately the defiend 183 * value can not be used here! */ 184 #define CONFIG_LOADADDR 0x82000000 185 186 #define CONFIG_COMMON_ENV_SETTINGS \ 187 "console=ttyO2,115200n8\0" \ 188 "mmcdev=0\0" \ 189 "vram=3M\0" \ 190 "defaultdisplay=lcd\0" \ 191 "kernelopts=mtdoops.mtddev=3\0" \ 192 "mtdparts=" MTDPARTS_DEFAULT "\0" \ 193 "mtdids=" MTDIDS_DEFAULT "\0" \ 194 "commonargs=" \ 195 "setenv bootargs console=${console} " \ 196 "${mtdparts} " \ 197 "${kernelopts} " \ 198 "vt.global_cursor_default=0 " \ 199 "vram=${vram} " \ 200 "omapdss.def_disp=${defaultdisplay}\0" 201 202 #define CONFIG_BOOTCOMMAND "run autoboot" 203 204 /* specific environment settings for different use cases 205 * FLASHCARD: used to run a rdimage from sdcard to program the device 206 * 'NORMAL': used to boot kernel from sdcard, nand, ... 207 * 208 * The main aim for the FLASHCARD skin is to have an embedded environment 209 * which will not be influenced by any data already on the device. 210 */ 211 #ifdef CONFIG_FLASHCARD 212 213 #define CONFIG_ENV_IS_NOWHERE 214 215 /* the rdaddr is 16 MiB before the loadaddr */ 216 #define CONFIG_ENV_RDADDR "rdaddr=0x81000000\0" 217 218 #define CONFIG_EXTRA_ENV_SETTINGS \ 219 CONFIG_COMMON_ENV_SETTINGS \ 220 CONFIG_ENV_RDADDR \ 221 "autoboot=" \ 222 "run commonargs; " \ 223 "setenv bootargs ${bootargs} " \ 224 "flashy_updateimg=/dev/mmcblk0p1:corscience_update.img " \ 225 "rdinit=/sbin/init; " \ 226 "mmc dev ${mmcdev}; mmc rescan; " \ 227 "fatload mmc ${mmcdev} ${loadaddr} uImage; " \ 228 "fatload mmc ${mmcdev} ${rdaddr} uRamdisk; " \ 229 "bootm ${loadaddr} ${rdaddr}\0" 230 231 #else /* CONFIG_FLASHCARD */ 232 233 #define CONFIG_ENV_OVERWRITE /* allow to overwrite serial and ethaddr */ 234 235 #define CONFIG_ENV_IS_IN_NAND 236 237 #define CONFIG_EXTRA_ENV_SETTINGS \ 238 CONFIG_COMMON_ENV_SETTINGS \ 239 "mmcargs=" \ 240 "run commonargs; " \ 241 "setenv bootargs ${bootargs} " \ 242 "root=/dev/mmcblk0p2 " \ 243 "rootwait " \ 244 "rw\0" \ 245 "nandargs=" \ 246 "run commonargs; " \ 247 "setenv bootargs ${bootargs} " \ 248 "root=ubi0:root " \ 249 "ubi.mtd=7 " \ 250 "rootfstype=ubifs " \ 251 "ro\0" \ 252 "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ 253 "bootscript=echo Running bootscript from mmc ...; " \ 254 "source ${loadaddr}\0" \ 255 "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ 256 "mmcboot=echo Booting from mmc ...; " \ 257 "run mmcargs; " \ 258 "bootm ${loadaddr}\0" \ 259 "loaduimage_ubi=ubi part ubi; " \ 260 "ubifsmount ubi:root; " \ 261 "ubifsload ${loadaddr} /boot/uImage\0" \ 262 "loaduimage_nand=nand read ${loadaddr} kernel 0x500000\0" \ 263 "nandboot=echo Booting from nand ...; " \ 264 "run nandargs; " \ 265 "run loaduimage_nand; " \ 266 "bootm ${loadaddr}\0" \ 267 "autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \ 268 "if run loadbootscript; then " \ 269 "run bootscript; " \ 270 "else " \ 271 "if run loaduimage; then " \ 272 "run mmcboot; " \ 273 "else run nandboot; " \ 274 "fi; " \ 275 "fi; " \ 276 "else run nandboot; fi\0" 277 278 #endif /* CONFIG_FLASHCARD */ 279 280 /* Miscellaneous configurable options */ 281 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 282 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ 283 #define CONFIG_CMDLINE_EDITING /* enable cmdline history */ 284 #define CONFIG_AUTO_COMPLETE 285 #define CONFIG_SYS_PROMPT "OMAP3 Tricorder # " 286 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ 287 /* Print Buffer Size */ 288 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 289 sizeof(CONFIG_SYS_PROMPT) + 16) 290 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 291 292 /* Boot Argument Buffer Size */ 293 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) 294 295 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0 + 0x00000000) 296 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ 297 0x07000000) /* 112 MB */ 298 299 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0 + 0x02000000) 300 301 /* 302 * OMAP3 has 12 GP timers, they can be driven by the system clock 303 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). 304 * This rate is divided by a local divisor. 305 */ 306 #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) 307 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 308 309 /* Physical Memory Map */ 310 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ 311 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 312 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 313 314 /* NAND and environment organization */ 315 #define PISMO1_NAND_SIZE GPMC_SIZE_128M 316 317 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ 318 319 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 320 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 321 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 322 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 323 CONFIG_SYS_INIT_RAM_SIZE - \ 324 GENERATED_GBL_DATA_SIZE) 325 326 /* SRAM config */ 327 #define CONFIG_SYS_SRAM_START 0x40200000 328 #define CONFIG_SYS_SRAM_SIZE 0x10000 329 330 /* Defines for SPL */ 331 #define CONFIG_SPL 332 #define CONFIG_SPL_FRAMEWORK 333 #define CONFIG_SPL_NAND_SIMPLE 334 335 #define CONFIG_SPL_BOARD_INIT 336 #define CONFIG_SPL_GPIO_SUPPORT 337 #define CONFIG_SPL_LIBCOMMON_SUPPORT 338 #define CONFIG_SPL_LIBDISK_SUPPORT 339 #define CONFIG_SPL_I2C_SUPPORT 340 #define CONFIG_SPL_LIBGENERIC_SUPPORT 341 #define CONFIG_SPL_SERIAL_SUPPORT 342 #define CONFIG_SPL_POWER_SUPPORT 343 #define CONFIG_SPL_NAND_SUPPORT 344 #define CONFIG_SPL_NAND_BASE 345 #define CONFIG_SPL_NAND_DRIVERS 346 #define CONFIG_SPL_NAND_ECC 347 #define CONFIG_SPL_MMC_SUPPORT 348 #define CONFIG_SPL_FAT_SUPPORT 349 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" 350 #define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" 351 #define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 352 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ 353 354 #define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ 355 #define CONFIG_SPL_MAX_SIZE (57 * 1024) /* 7 KB for stack */ 356 #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK 357 358 #define CONFIG_SPL_BSS_START_ADDR 0x80000000 /*CONFIG_SYS_SDRAM_BASE*/ 359 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 360 361 /* NAND boot config */ 362 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 363 #define CONFIG_SYS_NAND_PAGE_COUNT 64 364 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 365 #define CONFIG_SYS_NAND_OOBSIZE 64 366 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) 367 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 368 #define CONFIG_SYS_NAND_ECCPOS {12, 13, 14, 15, 16, 17, 18, 19, 20,\ 369 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33,\ 370 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46,\ 371 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59,\ 372 60, 61, 62, 63} 373 374 #define CONFIG_SYS_NAND_ECCSIZE 512 375 #define CONFIG_SYS_NAND_ECCBYTES 13 376 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW 377 378 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 379 380 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000 381 #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x100000 382 383 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 384 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ 385 386 #define CONFIG_SYS_ALT_MEMTEST 387 #define CONFIG_SYS_MEMTEST_SCRATCH 0x81000000 388 #endif /* __CONFIG_H */ 389