1 /* 2 * Copyright (C) 2013 Samsung Electronics 3 * Sanghee Kim <sh0130.kim@samsung.com> 4 * Piotr Wilczek <p.wilczek@samsung.com> 5 * 6 * Configuation settings for the SAMSUNG TRATS2 (EXYNOS4412) board. 7 * 8 * SPDX-License-Identifier: GPL-2.0+ 9 */ 10 11 #ifndef __CONFIG_TRATS2_H 12 #define __CONFIG_TRATS2_H 13 14 #include <configs/exynos4-common.h> 15 16 #define CONFIG_TIZEN /* TIZEN lib */ 17 18 #define CONFIG_SYS_L2CACHE_OFF 19 #ifndef CONFIG_SYS_L2CACHE_OFF 20 #define CONFIG_SYS_L2_PL310 21 #define CONFIG_SYS_PL310_BASE 0x10502000 22 #endif 23 24 /* TRATS2 has 4 banks of DRAM */ 25 #define CONFIG_NR_DRAM_BANKS 4 26 #define CONFIG_SYS_SDRAM_BASE 0x40000000 27 #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE 28 #define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */ 29 /* memtest works on */ 30 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE 31 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000) 32 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) 33 34 #define CONFIG_SYS_TEXT_BASE 0x43e00000 35 36 /* select serial console configuration */ 37 #define CONFIG_SERIAL2 38 #define CONFIG_BAUDRATE 115200 39 40 /* Console configuration */ 41 42 #define CONFIG_BOOTARGS "Please use defined boot" 43 #define CONFIG_BOOTCOMMAND "run autoboot" 44 #define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0" 45 46 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \ 47 - GENERATED_GBL_DATA_SIZE) 48 49 #define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */ 50 51 #define CONFIG_SYS_MONITOR_BASE 0x00000000 52 53 #define CONFIG_ENV_IS_IN_MMC 54 #define CONFIG_SYS_MMC_ENV_DEV CONFIG_MMC_DEFAULT_DEV 55 #define CONFIG_ENV_SIZE 4096 56 #define CONFIG_ENV_OFFSET ((32 - 4) << 10) /* 32KiB - 4KiB */ 57 58 #define CONFIG_ENV_OVERWRITE 59 60 #define CONFIG_ENV_VARS_UBOOT_CONFIG 61 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG 62 63 /* Tizen - partitions definitions */ 64 #define PARTS_CSA "csa-mmc" 65 #define PARTS_BOOT "boot" 66 #define PARTS_QBOOT "qboot" 67 #define PARTS_CSC "csc" 68 #define PARTS_ROOT "platform" 69 #define PARTS_DATA "data" 70 #define PARTS_UMS "ums" 71 72 #define PARTS_DEFAULT \ 73 "uuid_disk=${uuid_gpt_disk};" \ 74 "name="PARTS_CSA",start=5MiB,size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \ 75 "name="PARTS_BOOT",size=60MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \ 76 "name="PARTS_QBOOT",size=100MiB,uuid=${uuid_gpt_"PARTS_QBOOT"};" \ 77 "name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \ 78 "name="PARTS_ROOT",size=1536MiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \ 79 "name="PARTS_DATA",size=3000MiB,uuid=${uuid_gpt_"PARTS_DATA"};" \ 80 "name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \ 81 82 #define CONFIG_DFU_ALT \ 83 "u-boot raw 0x80 0x800;" \ 84 "/uImage ext4 0 2;" \ 85 "/modem.bin ext4 0 2;" \ 86 "/exynos4412-trats2.dtb ext4 0 2;" \ 87 ""PARTS_CSA" part 0 1;" \ 88 ""PARTS_BOOT" part 0 2;" \ 89 ""PARTS_QBOOT" part 0 3;" \ 90 ""PARTS_CSC" part 0 4;" \ 91 ""PARTS_ROOT" part 0 5;" \ 92 ""PARTS_DATA" part 0 6;" \ 93 ""PARTS_UMS" part 0 7;" \ 94 "params.bin raw 0x38 0x8;" \ 95 "/Image.itb ext4 0 2\0" 96 97 #define CONFIG_EXTRA_ENV_SETTINGS \ 98 "bootk=" \ 99 "run loaduimage;" \ 100 "if run loaddtb; then " \ 101 "bootm 0x40007FC0 - ${fdtaddr};" \ 102 "fi;" \ 103 "bootm 0x40007FC0;\0" \ 104 "updatebackup=" \ 105 "mmc dev 0 2; mmc write 0x51000000 0 0x800;" \ 106 " mmc dev 0 0\0" \ 107 "updatebootb=" \ 108 "mmc read 0x51000000 0x80 0x800; run updatebackup\0" \ 109 "mmcboot=" \ 110 "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \ 111 "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \ 112 "run bootk\0" \ 113 "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \ 114 "boottrace=setenv opts initcall_debug; run bootcmd\0" \ 115 "verify=n\0" \ 116 "rootfstype=ext4\0" \ 117 "console=" CONFIG_DEFAULT_CONSOLE \ 118 "kernelname=uImage\0" \ 119 "loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 " \ 120 "${kernelname}\0" \ 121 "loaddtb=ext4load mmc ${mmcdev}:${mmcbootpart} ${fdtaddr} " \ 122 "${fdtfile}\0" \ 123 "mmcdev=" __stringify(CONFIG_MMC_DEFAULT_DEV) "\0" \ 124 "mmcbootpart=2\0" \ 125 "mmcrootpart=5\0" \ 126 "opts=always_resume=1\0" \ 127 "partitions=" PARTS_DEFAULT \ 128 "dfu_alt_info=" CONFIG_DFU_ALT \ 129 "uartpath=ap\0" \ 130 "usbpath=ap\0" \ 131 "consoleon=set console console=ttySAC2,115200n8; save; reset\0" \ 132 "consoleoff=set console console=ram; save; reset\0" \ 133 "spladdr=0x40000100\0" \ 134 "splsize=0x200\0" \ 135 "splfile=falcon.bin\0" \ 136 "spl_export=" \ 137 "setexpr spl_imgsize ${splsize} + 8 ;" \ 138 "setenv spl_imgsize 0x${spl_imgsize};" \ 139 "setexpr spl_imgaddr ${spladdr} - 8 ;" \ 140 "setexpr spl_addr_tmp ${spladdr} - 4 ;" \ 141 "mw.b ${spl_imgaddr} 0x00 ${spl_imgsize};run loaduimage;" \ 142 "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \ 143 "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo};" \ 144 "spl export atags 0x40007FC0;" \ 145 "crc32 ${spladdr} ${splsize} ${spl_imgaddr};" \ 146 "mw.l ${spl_addr_tmp} ${splsize};" \ 147 "ext4write mmc ${mmcdev}:${mmcbootpart}" \ 148 " /${splfile} ${spl_imgaddr} ${spl_imgsize};" \ 149 "setenv spl_imgsize;" \ 150 "setenv spl_imgaddr;" \ 151 "setenv spl_addr_tmp;\0" \ 152 CONFIG_EXTRA_ENV_ITB \ 153 "fdtaddr=40800000\0" \ 154 155 /* GPT */ 156 #define CONFIG_RANDOM_UUID 157 158 /* I2C */ 159 #include <asm/arch/gpio.h> 160 161 #define CONFIG_SYS_I2C 162 #define CONFIG_SYS_I2C_S3C24X0 163 #define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 164 #define CONFIG_SYS_I2C_S3C24X0_SLAVE 0 165 #define CONFIG_MAX_I2C_NUM 8 166 #define CONFIG_SYS_I2C_SOFT 167 #define CONFIG_SYS_I2C_SOFT_SPEED 50000 168 #define CONFIG_SYS_I2C_SOFT_SLAVE 0x00 169 #define I2C_SOFT_DECLARATIONS2 170 #define CONFIG_SYS_I2C_SOFT_SPEED_2 50000 171 #define CONFIG_SYS_I2C_SOFT_SLAVE_2 0x00 172 #define CONFIG_SOFT_I2C_READ_REPEATED_START 173 #define CONFIG_SYS_I2C_INIT_BOARD 174 175 #ifndef __ASSEMBLY__ 176 int get_soft_i2c_scl_pin(void); 177 int get_soft_i2c_sda_pin(void); 178 #endif 179 #define CONFIG_SOFT_I2C_GPIO_SCL get_soft_i2c_scl_pin() 180 #define CONFIG_SOFT_I2C_GPIO_SDA get_soft_i2c_sda_pin() 181 182 /* POWER */ 183 #define CONFIG_POWER 184 #define CONFIG_POWER_I2C 185 #define CONFIG_POWER_MAX77686 186 #define CONFIG_POWER_PMIC_MAX77693 187 #define CONFIG_POWER_MUIC_MAX77693 188 #define CONFIG_POWER_FG_MAX77693 189 #define CONFIG_POWER_BATTERY_TRATS2 190 191 /* Security subsystem - enable hw_rand() */ 192 #define CONFIG_EXYNOS_ACE_SHA 193 #define CONFIG_LIB_HW_RAND 194 195 /* Common misc for Samsung */ 196 #define CONFIG_MISC_COMMON 197 198 #define CONFIG_MISC_INIT_R 199 200 /* Download menu - Samsung common */ 201 #define CONFIG_LCD_MENU 202 #define CONFIG_LCD_MENU_BOARD 203 204 /* Download menu - definitions for check keys */ 205 #ifndef __ASSEMBLY__ 206 #include <power/max77686_pmic.h> 207 208 #define KEY_PWR_PMIC_NAME "MAX77686_PMIC" 209 #define KEY_PWR_STATUS_REG MAX77686_REG_PMIC_STATUS1 210 #define KEY_PWR_STATUS_MASK (1 << 0) 211 #define KEY_PWR_INTERRUPT_REG MAX77686_REG_PMIC_INT1 212 #define KEY_PWR_INTERRUPT_MASK (1 << 1) 213 214 #define KEY_VOL_UP_GPIO EXYNOS4X12_GPIO_X22 215 #define KEY_VOL_DOWN_GPIO EXYNOS4X12_GPIO_X33 216 #endif /* __ASSEMBLY__ */ 217 218 /* LCD console */ 219 #define LCD_BPP LCD_COLOR16 220 #define CONFIG_SYS_WHITE_ON_BLACK 221 222 /* LCD */ 223 #define CONFIG_BMP_16BPP 224 #define CONFIG_FB_ADDR 0x52504000 225 #define CONFIG_EXYNOS_MIPI_DSIM 226 #define CONFIG_VIDEO_BMP_GZIP 227 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54) 228 229 #endif /* __CONFIG_H */ 230