1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright (C) 2013 Samsung Electronics 4 * Sanghee Kim <sh0130.kim@samsung.com> 5 * Piotr Wilczek <p.wilczek@samsung.com> 6 * 7 * Configuation settings for the SAMSUNG TRATS2 (EXYNOS4412) board. 8 */ 9 10 #ifndef __CONFIG_TRATS2_H 11 #define __CONFIG_TRATS2_H 12 13 #include <configs/exynos4-common.h> 14 15 #define CONFIG_TIZEN /* TIZEN lib */ 16 17 #define CONFIG_SYS_L2CACHE_OFF 18 #ifndef CONFIG_SYS_L2CACHE_OFF 19 #define CONFIG_SYS_L2_PL310 20 #define CONFIG_SYS_PL310_BASE 0x10502000 21 #endif 22 23 /* TRATS2 has 4 banks of DRAM */ 24 #define CONFIG_SYS_SDRAM_BASE 0x40000000 25 #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE 26 #define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */ 27 /* memtest works on */ 28 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE 29 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000) 30 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) 31 32 /* select serial console configuration */ 33 34 /* Console configuration */ 35 36 #define CONFIG_BOOTCOMMAND "run autoboot" 37 #define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0" 38 39 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \ 40 - GENERATED_GBL_DATA_SIZE) 41 42 #define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */ 43 44 #define CONFIG_SYS_MONITOR_BASE 0x00000000 45 46 #define CONFIG_SYS_MMC_ENV_DEV CONFIG_MMC_DEFAULT_DEV 47 #define CONFIG_ENV_SIZE 4096 48 #define CONFIG_ENV_OFFSET ((32 - 4) << 10) /* 32KiB - 4KiB */ 49 50 #define CONFIG_ENV_OVERWRITE 51 52 /* Tizen - partitions definitions */ 53 #define PARTS_CSA "csa-mmc" 54 #define PARTS_BOOT "boot" 55 #define PARTS_QBOOT "qboot" 56 #define PARTS_CSC "csc" 57 #define PARTS_ROOT "platform" 58 #define PARTS_DATA "data" 59 #define PARTS_UMS "ums" 60 61 #define PARTS_DEFAULT \ 62 "uuid_disk=${uuid_gpt_disk};" \ 63 "name="PARTS_CSA",start=5MiB,size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \ 64 "name="PARTS_BOOT",size=60MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \ 65 "name="PARTS_QBOOT",size=100MiB,uuid=${uuid_gpt_"PARTS_QBOOT"};" \ 66 "name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \ 67 "name="PARTS_ROOT",size=1536MiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \ 68 "name="PARTS_DATA",size=3000MiB,uuid=${uuid_gpt_"PARTS_DATA"};" \ 69 "name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \ 70 71 #define CONFIG_DFU_ALT \ 72 "u-boot raw 0x80 0x800;" \ 73 "/uImage ext4 0 2;" \ 74 "/modem.bin ext4 0 2;" \ 75 "/exynos4412-trats2.dtb ext4 0 2;" \ 76 ""PARTS_CSA" part 0 1;" \ 77 ""PARTS_BOOT" part 0 2;" \ 78 ""PARTS_QBOOT" part 0 3;" \ 79 ""PARTS_CSC" part 0 4;" \ 80 ""PARTS_ROOT" part 0 5;" \ 81 ""PARTS_DATA" part 0 6;" \ 82 ""PARTS_UMS" part 0 7;" \ 83 "params.bin raw 0x38 0x8;" \ 84 "/Image.itb ext4 0 2\0" 85 86 #define CONFIG_EXTRA_ENV_SETTINGS \ 87 "bootk=" \ 88 "run loaduimage;" \ 89 "if run loaddtb; then " \ 90 "bootm 0x40007FC0 - ${fdtaddr};" \ 91 "fi;" \ 92 "bootm 0x40007FC0;\0" \ 93 "updatebackup=" \ 94 "mmc dev 0 2; mmc write 0x51000000 0 0x800;" \ 95 " mmc dev 0 0\0" \ 96 "updatebootb=" \ 97 "mmc read 0x51000000 0x80 0x800; run updatebackup\0" \ 98 "mmcboot=" \ 99 "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \ 100 "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \ 101 "run bootk\0" \ 102 "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \ 103 "boottrace=setenv opts initcall_debug; run bootcmd\0" \ 104 "verify=n\0" \ 105 "rootfstype=ext4\0" \ 106 "console=" CONFIG_DEFAULT_CONSOLE \ 107 "kernelname=uImage\0" \ 108 "loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 " \ 109 "${kernelname}\0" \ 110 "loaddtb=ext4load mmc ${mmcdev}:${mmcbootpart} ${fdtaddr} " \ 111 "${fdtfile}\0" \ 112 "mmcdev=" __stringify(CONFIG_MMC_DEFAULT_DEV) "\0" \ 113 "mmcbootpart=2\0" \ 114 "mmcrootpart=5\0" \ 115 "opts=always_resume=1\0" \ 116 "partitions=" PARTS_DEFAULT \ 117 "dfu_alt_info=" CONFIG_DFU_ALT \ 118 "uartpath=ap\0" \ 119 "usbpath=ap\0" \ 120 "consoleon=set console console=ttySAC2,115200n8; save; reset\0" \ 121 "consoleoff=set console console=ram; save; reset\0" \ 122 "spladdr=0x40000100\0" \ 123 "splsize=0x200\0" \ 124 "splfile=falcon.bin\0" \ 125 "spl_export=" \ 126 "setexpr spl_imgsize ${splsize} + 8 ;" \ 127 "setenv spl_imgsize 0x${spl_imgsize};" \ 128 "setexpr spl_imgaddr ${spladdr} - 8 ;" \ 129 "setexpr spl_addr_tmp ${spladdr} - 4 ;" \ 130 "mw.b ${spl_imgaddr} 0x00 ${spl_imgsize};run loaduimage;" \ 131 "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \ 132 "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo};" \ 133 "spl export atags 0x40007FC0;" \ 134 "crc32 ${spladdr} ${splsize} ${spl_imgaddr};" \ 135 "mw.l ${spl_addr_tmp} ${splsize};" \ 136 "ext4write mmc ${mmcdev}:${mmcbootpart}" \ 137 " /${splfile} ${spl_imgaddr} ${spl_imgsize};" \ 138 "setenv spl_imgsize;" \ 139 "setenv spl_imgaddr;" \ 140 "setenv spl_addr_tmp;\0" \ 141 CONFIG_EXTRA_ENV_ITB \ 142 "fdtaddr=40800000\0" \ 143 144 /* GPT */ 145 146 /* Security subsystem - enable hw_rand() */ 147 #define CONFIG_EXYNOS_ACE_SHA 148 149 /* Common misc for Samsung */ 150 #define CONFIG_MISC_COMMON 151 152 /* Download menu - Samsung common */ 153 #define CONFIG_LCD_MENU 154 155 /* Download menu - definitions for check keys */ 156 #ifndef __ASSEMBLY__ 157 158 #define KEY_PWR_PMIC_NAME "MAX77686_PMIC" 159 #define KEY_PWR_STATUS_REG MAX77686_REG_PMIC_STATUS1 160 #define KEY_PWR_STATUS_MASK (1 << 0) 161 #define KEY_PWR_INTERRUPT_REG MAX77686_REG_PMIC_INT1 162 #define KEY_PWR_INTERRUPT_MASK (1 << 1) 163 164 #define KEY_VOL_UP_GPIO EXYNOS4X12_GPIO_X22 165 #define KEY_VOL_DOWN_GPIO EXYNOS4X12_GPIO_X33 166 #endif /* __ASSEMBLY__ */ 167 168 /* LCD console */ 169 #define LCD_BPP LCD_COLOR16 170 171 /* LCD */ 172 #define CONFIG_BMP_16BPP 173 #define CONFIG_FB_ADDR 0x52504000 174 #define CONFIG_EXYNOS_MIPI_DSIM 175 #define CONFIG_VIDEO_BMP_GZIP 176 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54) 177 178 #endif /* __CONFIG_H */ 179