1 /* 2 * Copyright (C) 2013 Stefan Roese <sr@denx.de> 3 * 4 * Configuration settings for the ProjectionDesign / Barco 5 * Titanium board. 6 * 7 * Based on mx6qsabrelite.h which is: 8 * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 #ifndef __CONFIG_H 14 #define __CONFIG_H 15 16 #include "mx6_common.h" 17 18 #define CONFIG_MX6Q 19 20 /* Provide the MACH_TYPE value that the vendor kernel requires. */ 21 #define CONFIG_MACH_TYPE 3769 22 23 /* Size of malloc() pool */ 24 #define CONFIG_SYS_MALLOC_LEN (2 * 1024 * 1024) 25 26 #define CONFIG_MISC_INIT_R 27 28 #define CONFIG_MXC_UART 29 #define CONFIG_MXC_UART_BASE UART1_BASE 30 31 /* I2C Configs */ 32 #define CONFIG_SYS_I2C 33 #define CONFIG_SYS_I2C_MXC 34 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 35 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 36 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 37 #define CONFIG_SYS_I2C_SPEED 100000 38 39 /* MMC Configs */ 40 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 41 #define CONFIG_SYS_FSL_USDHC_NUM 1 42 43 #define CONFIG_FEC_MXC 44 #define CONFIG_MII 45 #define IMX_FEC_BASE ENET_BASE_ADDR 46 #define CONFIG_FEC_XCV_TYPE RGMII 47 #define CONFIG_FEC_MXC_PHYADDR 4 48 49 /* USB Configs */ 50 #define CONFIG_MXC_USB_PORT 1 51 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 52 #define CONFIG_MXC_USB_FLAGS 0 53 54 #define CONFIG_SYS_MEMTEST_START 0x10000000 55 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (500 << 20)) 56 57 #define CONFIG_HOSTNAME "titanium" 58 #define CONFIG_UBI_PART ubi 59 #define CONFIG_UBIFS_VOLUME rootfs0 60 61 #define CONFIG_EXTRA_ENV_SETTINGS \ 62 "kernel=" CONFIG_HOSTNAME "/uImage\0" \ 63 "kernel_fs=/boot/uImage\0" \ 64 "kernel_addr=11000000\0" \ 65 "dtb=" CONFIG_HOSTNAME "/" \ 66 CONFIG_HOSTNAME ".dtb\0" \ 67 "dtb_fs=/boot/" CONFIG_HOSTNAME ".dtb\0" \ 68 "dtb_addr=12800000\0" \ 69 "script=boot.scr\0" \ 70 "uimage=uImage\0" \ 71 "console=ttymxc0\0" \ 72 "baudrate=115200\0" \ 73 "fdt_high=0xffffffff\0" \ 74 "initrd_high=0xffffffff\0" \ 75 "mmcdev=0\0" \ 76 "mmcpart=1\0" \ 77 "uimage=uImage\0" \ 78 "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}" \ 79 " ${script}\0" \ 80 "bootscript=echo Running bootscript from mmc ...; source\0" \ 81 "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ 82 "mmcroot=/dev/mmcblk0p2\0" \ 83 "mmcargs=setenv bootargs console=${console},${baudrate} " \ 84 "root=${mmcroot} rootwait rw\0" \ 85 "bootmmc=run mmcargs; fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}" \ 86 " ${uimage}; bootm\0" \ 87 "addip=setenv bootargs ${bootargs} " \ 88 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ 89 ":${hostname}:${netdev}:off panic=1\0" \ 90 "addcon=setenv bootargs ${bootargs} console=ttymxc0," \ 91 "${baudrate}\0" \ 92 "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ 93 "rootpath=/opt/eldk-5.3/armv7a/rootfs-minimal-mtdutils\0" \ 94 "nfsargs=setenv bootargs root=/dev/nfs rw " \ 95 "nfsroot=${serverip}:${rootpath}\0" \ 96 "ubifs=" CONFIG_HOSTNAME "/ubifs.img\0" \ 97 "part=" __stringify(CONFIG_UBI_PART) "\0" \ 98 "boot_vol=0\0" \ 99 "vol=" __stringify(CONFIG_UBIFS_VOLUME) "\0" \ 100 "load_ubifs=tftp ${kernel_addr} ${ubifs}\0" \ 101 "update_ubifs=ubi part ${part};ubi write ${kernel_addr} ${vol}" \ 102 " ${filesize}\0" \ 103 "upd_ubifs=run load_ubifs update_ubifs\0" \ 104 "init_ubi=nand erase.part ubi;ubi part ${part};" \ 105 "ubi create ${vol} c800000\0" \ 106 "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ 107 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ 108 "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip" \ 109 " addcon addmtd;" \ 110 "bootm ${kernel_addr} - ${dtb_addr}\0" \ 111 "ubifsargs=set bootargs ubi.mtd=ubi " \ 112 "root=ubi:rootfs${boot_vol} rootfstype=ubifs\0" \ 113 "ubifs_mount=ubi part ubi;ubifsmount ubi:rootfs${boot_vol}\0" \ 114 "ubifs_load=ubifsload ${kernel_addr} ${kernel_fs};" \ 115 "ubifsload ${dtb_addr} ${dtb_fs};\0" \ 116 "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip addcon " \ 117 "addmtd;bootm ${kernel_addr} - ${dtb_addr}\0" \ 118 "load_kernel=tftp ${kernel_addr} ${kernel}\0" \ 119 "load_dtb=tftp ${dtb_addr} ${dtb}\0" \ 120 "net_nfs=run load_dtb load_kernel; " \ 121 "run nfsargs addip addcon addmtd;" \ 122 "bootm ${kernel_addr} - ${dtb_addr}\0" \ 123 "delenv=env default -a -f; saveenv; reset\0" 124 125 #define CONFIG_BOOTCOMMAND "run nand_ubifs" 126 127 /* Physical Memory Map */ 128 #define CONFIG_NR_DRAM_BANKS 1 129 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR 130 #define PHYS_SDRAM_SIZE (512 << 20) 131 132 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 133 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 134 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 135 136 #define CONFIG_SYS_INIT_SP_OFFSET \ 137 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 138 #define CONFIG_SYS_INIT_SP_ADDR \ 139 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 140 141 /* Enable NAND support */ 142 #ifdef CONFIG_CMD_NAND 143 144 /* NAND stuff */ 145 #define CONFIG_SYS_MAX_NAND_DEVICE 1 146 #define CONFIG_SYS_NAND_BASE 0x40000000 147 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 148 #define CONFIG_SYS_NAND_ONFI_DETECTION 149 150 /* DMA stuff, needed for GPMI/MXS NAND support */ 151 152 /* Environment in NAND */ 153 #define CONFIG_ENV_OFFSET (16 << 20) 154 #define CONFIG_ENV_SECT_SIZE (128 << 10) 155 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE 156 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 << 10)) 157 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE 158 159 #else /* CONFIG_CMD_NAND */ 160 161 /* Environment in MMC */ 162 #define CONFIG_ENV_SIZE (8 << 10) 163 #define CONFIG_ENV_OFFSET (6 * 64 * 1024) 164 #define CONFIG_SYS_MMC_ENV_DEV 0 165 166 #endif /* CONFIG_CMD_NAND */ 167 168 /* UBI/UBIFS config options */ 169 #define CONFIG_MTD_DEVICE 170 #define CONFIG_MTD_PARTITIONS 171 172 #endif /* __CONFIG_H */ 173