1 /*
2  * (C) Copyright 2013
3  * Texas Instruments Incorporated.
4  * Sricharan R	  <r.sricharan@ti.com>
5  *
6  * Derived from OMAP4 done by:
7  *	Aneesh V <aneesh@ti.com>
8  *
9  * TI OMAP5 AND DRA7XX common configuration settings
10  *
11  * SPDX-License-Identifier:	GPL-2.0+
12  *
13  * For more details, please see the technical documents listed at
14  * http://www.ti.com/product/omap5432
15  */
16 
17 #ifndef __CONFIG_TI_OMAP5_COMMON_H
18 #define __CONFIG_TI_OMAP5_COMMON_H
19 
20 #define CONFIG_DISPLAY_CPUINFO
21 #define CONFIG_DISPLAY_BOARDINFO
22 #define CONFIG_ARCH_CPU_INIT
23 
24 /* Common ARM Erratas */
25 #define CONFIG_ARM_ERRATA_798870
26 
27 #define CONFIG_SYS_CACHELINE_SIZE	64
28 
29 /* Use General purpose timer 1 */
30 #define CONFIG_SYS_TIMERBASE		GPT2_BASE
31 
32 /*
33  * For the DDR timing information we can either dynamically determine
34  * the timings to use or use pre-determined timings (based on using the
35  * dynamic method.  Default to the static timing infomation.
36  */
37 #define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
38 #ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
39 #define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
40 #define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
41 #endif
42 
43 #ifndef CONFIG_SPL_BUILD
44 #define CONFIG_PALMAS_POWER
45 #endif
46 
47 #include <asm/arch/cpu.h>
48 #include <asm/arch/omap.h>
49 
50 #include <configs/ti_armv7_common.h>
51 
52 /*
53  * Hardware drivers
54  */
55 #define CONFIG_SYS_NS16550
56 #define CONFIG_SYS_NS16550_SERIAL
57 #define CONFIG_SYS_NS16550_REG_SIZE	(-4)
58 #define CONFIG_SYS_NS16550_CLK		48000000
59 
60 /* Per-SoC commands */
61 #undef CONFIG_CMD_NET
62 #undef CONFIG_CMD_NFS
63 
64 /*
65  * Environment setup
66  */
67 #ifndef PARTS_DEFAULT
68 #define PARTS_DEFAULT
69 #endif
70 
71 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
72 #define CONFIG_EXTRA_ENV_SETTINGS \
73 	DEFAULT_LINUX_BOOT_ENV \
74 	"console=" CONSOLEDEV ",115200n8\0" \
75 	"fdtfile=undefined\0" \
76 	"bootpart=0:2\0" \
77 	"bootdir=/boot\0" \
78 	"bootfile=zImage\0" \
79 	"usbtty=cdc_acm\0" \
80 	"vram=16M\0" \
81 	"partitions=" PARTS_DEFAULT "\0" \
82 	"optargs=\0" \
83 	"mmcdev=0\0" \
84 	"mmcroot=/dev/mmcblk0p2 rw\0" \
85 	"mmcrootfstype=ext4 rootwait\0" \
86 	"mmcargs=setenv bootargs console=${console} " \
87 		"${optargs} " \
88 		"vram=${vram} " \
89 		"root=${mmcroot} " \
90 		"rootfstype=${mmcrootfstype}\0" \
91 	"netargs=setenv bootargs console=${console} " \
92 		"${optargs} " \
93 		"root=/dev/nfs " \
94 		"nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
95 		"ip=dhcp\0" \
96 	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
97 	"bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
98 		"source ${loadaddr}\0" \
99 	"bootenv=uEnv.txt\0" \
100 	"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
101 	"importbootenv=echo Importing environment from mmc${mmcdev} ...; " \
102 		"env import -t ${loadaddr} ${filesize}\0" \
103 	"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
104 	"mmcboot=mmc dev ${mmcdev}; " \
105 		"if mmc rescan; then " \
106 			"echo SD/MMC found on device ${mmcdev};" \
107 			"if run loadbootenv; then " \
108 				"echo Loaded environment from ${bootenv};" \
109 				"run importbootenv;" \
110 			"fi;" \
111 			"if test -n $uenvcmd; then " \
112 				"echo Running uenvcmd ...;" \
113 				"run uenvcmd;" \
114 			"fi;" \
115 			"if run loadimage; then " \
116 				"run loadfdt; " \
117 				"echo Booting from mmc${mmcdev} ...; " \
118 				"run mmcargs; " \
119 				"bootz ${loadaddr} - ${fdtaddr}; " \
120 			"fi;" \
121 		"fi;\0" \
122 	"netboot=echo Booting from network ...; " \
123 		"set env autoload no; " \
124 		"dhcp; " \
125 		"tftp ${loadaddr} ${bootfile}; " \
126 		"tftp ${fdtaddr} ${fdtfile}; " \
127 		"run netargs; " \
128 		"bootz ${loadaddr} - ${fdtaddr}\0" \
129 	"findfdt="\
130 		"if test $board_name = omap5_uevm; then " \
131 			"setenv fdtfile omap5-uevm.dtb; fi; " \
132 		"if test $board_name = dra7xx; then " \
133 			"setenv fdtfile dra7-evm.dtb; fi;" \
134 		"if test $board_name = dra72x; then " \
135 			"setenv fdtfile dra72-evm.dtb; fi;" \
136 		"if test $board_name = beagle_x15; then " \
137 			"setenv fdtfile am57xx-beagle-x15.dtb; fi;" \
138 		"if test $fdtfile = undefined; then " \
139 			"echo WARNING: Could not determine device tree to use; fi; \0" \
140 	"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile};\0" \
141 
142 #define CONFIG_BOOTCOMMAND \
143 	"run findfdt; " \
144 	"run mmcboot;" \
145 	"setenv mmcdev 1; " \
146 	"setenv bootpart 1:2; " \
147 	"setenv mmcroot /dev/mmcblk0p2 rw; " \
148 	"run mmcboot;" \
149 
150 
151 /*
152  * SPL related defines.  The Public RAM memory map the ROM defines the
153  * area between 0x40300000 and 0x4031E000 as a download area for OMAP5
154  * (dra7xx is larger, but we do not need to be larger at this time).  We
155  * set CONFIG_SPL_DISPLAY_PRINT to have omap_rev_string() called and
156  * print some information.
157  */
158 #define CONFIG_SPL_TEXT_BASE		0x40300000
159 #define CONFIG_SPL_MAX_SIZE		(0x4031E000 - CONFIG_SPL_TEXT_BASE)
160 #define CONFIG_SPL_DISPLAY_PRINT
161 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
162 #define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_SDRAM_BASE + \
163 					 (128 << 20))
164 
165 #ifdef CONFIG_NAND
166 #define CONFIG_SPL_NAND_AM33XX_BCH	/* ELM support */
167 #endif
168 
169 #endif /* __CONFIG_TI_OMAP5_COMMON_H */
170