1 /* 2 * (C) Copyright 2013 3 * Texas Instruments Incorporated. 4 * Sricharan R <r.sricharan@ti.com> 5 * 6 * Derived from OMAP4 done by: 7 * Aneesh V <aneesh@ti.com> 8 * 9 * TI OMAP5 AND DRA7XX common configuration settings 10 * 11 * SPDX-License-Identifier: GPL-2.0+ 12 * 13 * For more details, please see the technical documents listed at 14 * http://www.ti.com/product/omap5432 15 */ 16 17 #ifndef __CONFIG_TI_OMAP5_COMMON_H 18 #define __CONFIG_TI_OMAP5_COMMON_H 19 20 /* Use General purpose timer 1 */ 21 #define CONFIG_SYS_TIMERBASE GPT2_BASE 22 23 /* 24 * For the DDR timing information we can either dynamically determine 25 * the timings to use or use pre-determined timings (based on using the 26 * dynamic method. Default to the static timing infomation. 27 */ 28 #define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS 29 #ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS 30 #define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION 31 #define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS 32 #endif 33 34 #define CONFIG_PALMAS_POWER 35 36 #include <asm/arch/cpu.h> 37 #include <asm/arch/omap.h> 38 39 #include <configs/ti_armv7_omap.h> 40 41 /* 42 * Hardware drivers 43 */ 44 #define CONFIG_SYS_NS16550_CLK 48000000 45 #if !defined(CONFIG_DM_SERIAL) 46 #define CONFIG_SYS_NS16550_SERIAL 47 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 48 #endif 49 50 /* 51 * Environment setup 52 */ 53 54 #ifndef DFUARGS 55 #define DFUARGS 56 #endif 57 58 #include <environment/ti/boot.h> 59 #include <environment/ti/mmc.h> 60 61 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG 62 #define CONFIG_EXTRA_ENV_SETTINGS \ 63 DEFAULT_LINUX_BOOT_ENV \ 64 DEFAULT_MMC_TI_ARGS \ 65 DEFAULT_FIT_TI_ARGS \ 66 DEFAULT_COMMON_BOOT_TI_ARGS \ 67 DEFAULT_FDT_TI_ARGS \ 68 DFUARGS \ 69 NETARGS \ 70 71 /* 72 * SPL related defines. The Public RAM memory map the ROM defines the 73 * area between 0x40300000 and 0x4031E000 as a download area for OMAP5. 74 * On DRA7xx/AM57XX the download area is between 0x40300000 and 0x4037E000. 75 * We set CONFIG_SPL_DISPLAY_PRINT to have omap_rev_string() called and 76 * print some information. 77 */ 78 #ifdef CONFIG_TI_SECURE_DEVICE 79 /* 80 * For memory booting on HS parts, the first 4KB of the internal RAM is 81 * reserved for secure world use and the flash loader image is 82 * preceded by a secure certificate. The SPL will therefore run in internal 83 * RAM from address 0x40301350 (0x40300000+0x1000(reserved)+0x350(cert)). 84 */ 85 #define TI_OMAP5_SECURE_BOOT_RESV_SRAM_SZ 0x1000 86 #define CONFIG_SPL_TEXT_BASE 0x40301350 87 /* If no specific start address is specified then the secure EMIF 88 * region will be placed at the end of the DDR space. In order to prevent 89 * the main u-boot relocation from clobbering that memory and causing a 90 * firewall violation, we tell u-boot that memory is protected RAM (PRAM) 91 */ 92 #if (CONFIG_TI_SECURE_EMIF_REGION_START == 0) 93 #define CONFIG_PRAM (CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE) >> 10 94 #endif 95 #else 96 /* 97 * For all booting on GP parts, the flash loader image is 98 * downloaded into internal RAM at address 0x40300000. 99 */ 100 #define CONFIG_SPL_TEXT_BASE 0x40300000 101 #endif 102 103 #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ 104 (128 << 20)) 105 106 #ifdef CONFIG_NAND 107 #define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */ 108 #endif 109 110 #ifdef CONFIG_SPL_BUILD 111 #undef CONFIG_TIMER 112 #endif 113 114 #endif /* __CONFIG_TI_OMAP5_COMMON_H */ 115