1 /*
2  * (C) Copyright 2013
3  * Texas Instruments Incorporated.
4  * Sricharan R	  <r.sricharan@ti.com>
5  *
6  * Derived from OMAP4 done by:
7  *	Aneesh V <aneesh@ti.com>
8  *
9  * TI OMAP5 AND DRA7XX common configuration settings
10  *
11  * SPDX-License-Identifier:	GPL-2.0+
12  *
13  * For more details, please see the technical documents listed at
14  * http://www.ti.com/product/omap5432
15  */
16 
17 #ifndef __CONFIG_TI_OMAP5_COMMON_H
18 #define __CONFIG_TI_OMAP5_COMMON_H
19 
20 #define CONFIG_OMAP54XX
21 #define CONFIG_DISPLAY_CPUINFO
22 #define CONFIG_DISPLAY_BOARDINFO
23 #define CONFIG_MISC_INIT_R
24 #define CONFIG_ARCH_CPU_INIT
25 
26 #define CONFIG_SYS_CACHELINE_SIZE	64
27 
28 /* Use General purpose timer 1 */
29 #define CONFIG_SYS_TIMERBASE		GPT2_BASE
30 
31 /*
32  * For the DDR timing information we can either dynamically determine
33  * the timings to use or use pre-determined timings (based on using the
34  * dynamic method.  Default to the static timing infomation.
35  */
36 #define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
37 #ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
38 #define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
39 #define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
40 #endif
41 
42 #ifndef CONFIG_SPL_BUILD
43 #define CONFIG_PALMAS_POWER
44 #endif
45 
46 #include <asm/arch/cpu.h>
47 #include <asm/arch/omap.h>
48 
49 #include <configs/ti_armv7_common.h>
50 
51 /*
52  * Hardware drivers
53  */
54 #define CONFIG_SYS_NS16550
55 #define CONFIG_SYS_NS16550_SERIAL
56 #define CONFIG_SYS_NS16550_REG_SIZE	(-4)
57 #define CONFIG_SYS_NS16550_CLK		48000000
58 
59 /* Per-SoC commands */
60 #undef CONFIG_CMD_NET
61 #undef CONFIG_CMD_NFS
62 
63 /*
64  * Environment setup
65  */
66 #ifndef PARTS_DEFAULT
67 #define PARTS_DEFAULT
68 #endif
69 
70 #define CONFIG_EXTRA_ENV_SETTINGS \
71 	DEFAULT_LINUX_BOOT_ENV \
72 	"console=" CONSOLEDEV ",115200n8\0" \
73 	"fdtfile=undefined\0" \
74 	"bootpart=0:2\0" \
75 	"bootdir=/boot\0" \
76 	"bootfile=zImage\0" \
77 	"usbtty=cdc_acm\0" \
78 	"vram=16M\0" \
79 	"partitions=" PARTS_DEFAULT "\0" \
80 	"optargs=\0" \
81 	"mmcdev=0\0" \
82 	"mmcroot=/dev/mmcblk1p2 rw\0" \
83 	"mmcrootfstype=ext4 rootwait\0" \
84 	"mmcargs=setenv bootargs console=${console} " \
85 		"${optargs} " \
86 		"vram=${vram} " \
87 		"root=${mmcroot} " \
88 		"rootfstype=${mmcrootfstype}\0" \
89 	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
90 	"bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
91 		"source ${loadaddr}\0" \
92 	"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
93 	"importbootenv=echo Importing environment from mmc${mmcdev} ...; " \
94 		"env import -t ${loadaddr} ${filesize}\0" \
95 	"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
96 	"mmcboot=mmc dev ${mmcdev}; " \
97 		"if mmc rescan; then " \
98 			"echo SD/MMC found on device ${mmcdev};" \
99 			"if run loadbootenv; then " \
100 				"echo Loaded environment from ${bootenv};" \
101 				"run importbootenv;" \
102 			"fi;" \
103 			"if test -n $uenvcmd; then " \
104 				"echo Running uenvcmd ...;" \
105 				"run uenvcmd;" \
106 			"fi;" \
107 			"if run loadimage; then " \
108 				"run loadfdt; " \
109 				"echo Booting from mmc${mmcdev} ...; " \
110 				"run mmcargs; " \
111 				"bootz ${loadaddr} - ${fdtaddr}; " \
112 			"fi;" \
113 		"fi;\0" \
114 	"findfdt="\
115 		"if test $board_name = omap5_uevm; then " \
116 			"setenv fdtfile omap5-uevm.dtb; fi; " \
117 		"if test $board_name = dra7xx; then " \
118 			"setenv fdtfile dra7-evm.dtb; fi;" \
119 		"if test $fdtfile = undefined; then " \
120 			"echo WARNING: Could not determine device tree to use; fi; \0" \
121 	"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile};\0" \
122 
123 #define CONFIG_BOOTCOMMAND \
124 	"run findfdt; " \
125 	"run mmcboot;" \
126 	"setenv mmcdev 1; " \
127 	"setenv bootpart 1:2; " \
128 	"setenv mmcroot /dev/mmcblk0p2 rw; " \
129 	"run mmcboot;" \
130 
131 
132 /*
133  * SPL related defines.  The Public RAM memory map the ROM defines the
134  * area between 0x40300000 and 0x4031E000 as a download area for OMAP5
135  * (dra7xx is larger, but we do not need to be larger at this time).  We
136  * set CONFIG_SPL_DISPLAY_PRINT to have omap_rev_string() called and
137  * print some information.
138  */
139 #define CONFIG_SPL_TEXT_BASE		0x40300000
140 #define CONFIG_SPL_MAX_SIZE		(0x4031E000 - CONFIG_SPL_TEXT_BASE)
141 #define CONFIG_SPL_DISPLAY_PRINT
142 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
143 #define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_SDRAM_BASE + \
144 					 (128 << 20))
145 
146 #ifdef CONFIG_NAND
147 #define CONFIG_SPL_NAND_AM33XX_BCH	/* ELM support */
148 #endif
149 
150 #endif /* __CONFIG_TI_OMAP5_COMMON_H */
151