1 /* 2 * ti_am335x_common.h 3 * 4 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 * 8 * For more details, please see the technical documents listed at 9 * http://www.ti.com/product/am3359#technicaldocuments 10 */ 11 12 #ifndef __CONFIG_TI_AM335X_COMMON_H__ 13 #define __CONFIG_TI_AM335X_COMMON_H__ 14 15 #define CONFIG_ARCH_CPU_INIT 16 #define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ 17 #define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ 18 #define CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC 19 20 #include <asm/arch/omap.h> 21 22 /* NS16550 Configuration */ 23 #ifdef CONFIG_SPL_BUILD 24 #define CONFIG_SYS_NS16550_SERIAL 25 #ifndef CONFIG_DM_SERIAL 26 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 27 #endif 28 #endif 29 #define CONFIG_SYS_NS16550_CLK 48000000 30 31 #ifndef CONFIG_SPL_BUILD 32 /* Network defines. */ 33 #define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */ 34 #define CONFIG_BOOTP_DNS2 35 #define CONFIG_BOOTP_SEND_HOSTNAME 36 #define CONFIG_BOOTP_GATEWAY 37 #define CONFIG_BOOTP_SUBNETMASK 38 #define CONFIG_NET_RETRY_COUNT 10 39 #define CONFIG_MII /* Required in net/eth.c */ 40 #endif 41 42 #define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */ 43 /* 44 * RTC related defines. To use bootcount you must set bootlimit in the 45 * environment to a non-zero value and enable CONFIG_BOOTCOUNT_LIMIT 46 * in the board config. 47 */ 48 #define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000 49 50 /* 51 * SPL related defines. The Public RAM memory map the ROM defines the 52 * area between 0x402F0400 and 0x4030B800 as a download area and 53 * 0x4030B800 to 0x4030CE00 as a public stack area. The ROM also 54 * supports X-MODEM loading via UART, and we leverage this and then use 55 * Y-MODEM to load u-boot.img, when booted over UART. 56 */ 57 #define CONFIG_SPL_TEXT_BASE CONFIG_ISW_ENTRY_ADDR 58 #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ 59 (128 << 20)) 60 61 /* Enable the watchdog inside of SPL */ 62 63 /* 64 * Since SPL did pll and ddr initialization for us, 65 * we don't need to do it twice. 66 */ 67 #if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_NOR_BOOT) 68 #define CONFIG_SKIP_LOWLEVEL_INIT 69 #endif 70 71 /* 72 * When building U-Boot such that there is no previous loader 73 * we need to call board_early_init_f. This is taken care of in 74 * s_init when we have SPL used. 75 */ 76 77 #ifdef CONFIG_NAND 78 #define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */ 79 #endif 80 81 /* Now bring in the rest of the common code. */ 82 #include <configs/ti_armv7_omap.h> 83 84 #endif /* __CONFIG_TI_AM335X_COMMON_H__ */ 85