1 /* 2 * ti_am335x_common.h 3 * 4 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 * 8 * For more details, please see the technical documents listed at 9 * http://www.ti.com/product/am3359#technicaldocuments 10 */ 11 12 #ifndef __CONFIG_TI_AM335X_COMMON_H__ 13 #define __CONFIG_TI_AM335X_COMMON_H__ 14 15 #define CONFIG_AM33XX 16 #define CONFIG_ARCH_CPU_INIT 17 #define CONFIG_SYS_CACHELINE_SIZE 64 18 #define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ 19 #define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ 20 #define CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC 21 22 #ifndef CONFIG_SPL_BUILD 23 # define CONFIG_OMAP_SERIAL 24 #endif 25 26 #include <asm/arch/omap.h> 27 28 /* NS16550 Configuration */ 29 #define CONFIG_SYS_NS16550 30 #ifdef CONFIG_SPL_BUILD 31 #define CONFIG_SYS_NS16550_SERIAL 32 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 33 #endif 34 #define CONFIG_SYS_NS16550_CLK 48000000 35 36 /* Network defines. */ 37 #define CONFIG_CMD_DHCP 38 #define CONFIG_CMD_MII 39 #define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */ 40 #define CONFIG_BOOTP_DNS2 41 #define CONFIG_BOOTP_SEND_HOSTNAME 42 #define CONFIG_BOOTP_GATEWAY 43 #define CONFIG_BOOTP_SUBNETMASK 44 #define CONFIG_NET_RETRY_COUNT 10 45 #define CONFIG_CMD_PING 46 #define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */ 47 #define CONFIG_MII /* Required in net/eth.c */ 48 49 /* 50 * RTC related defines. To use bootcount you must set bootlimit in the 51 * environment to a non-zero value and enable CONFIG_BOOTCOUNT_LIMIT 52 * in the board config. 53 */ 54 #define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000 55 56 /* Enable the HW watchdog, since we can use this with bootcount */ 57 #define CONFIG_HW_WATCHDOG 58 #define CONFIG_OMAP_WATCHDOG 59 60 /* 61 * SPL related defines. The Public RAM memory map the ROM defines the 62 * area between 0x402F0400 and 0x4030B800 as a download area and 63 * 0x4030B800 to 0x4030CE00 as a public stack area. The ROM also 64 * supports X-MODEM loading via UART, and we leverage this and then use 65 * Y-MODEM to load u-boot.img, when booted over UART. 66 */ 67 #define CONFIG_SPL_TEXT_BASE 0x402F0400 68 #define CONFIG_SPL_MAX_SIZE (0x4030B800 - CONFIG_SPL_TEXT_BASE) 69 #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ 70 (128 << 20)) 71 72 /* Enable the watchdog inside of SPL */ 73 #define CONFIG_SPL_WATCHDOG_SUPPORT 74 75 /* 76 * Since SPL did pll and ddr initialization for us, 77 * we don't need to do it twice. 78 */ 79 #if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_NOR_BOOT) 80 #define CONFIG_SKIP_LOWLEVEL_INIT 81 #endif 82 83 /* 84 * When building U-Boot such that there is no previous loader 85 * we need to call board_early_init_f. This is taken care of in 86 * s_init when we have SPL used. 87 */ 88 #if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && !defined(CONFIG_SPL) 89 #define CONFIG_BOARD_EARLY_INIT_F 90 #endif 91 92 #ifdef CONFIG_NAND 93 #define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */ 94 #endif 95 96 /* Now bring in the rest of the common code. */ 97 #include <configs/ti_armv7_omap.h> 98 99 #endif /* __CONFIG_TI_AM335X_COMMON_H__ */ 100