1 /* 2 * ti_am335x_common.h 3 * 4 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 * 8 * For more details, please see the technical documents listed at 9 * http://www.ti.com/product/am3359#technicaldocuments 10 */ 11 12 #ifndef __CONFIG_TI_AM335X_COMMON_H__ 13 #define __CONFIG_TI_AM335X_COMMON_H__ 14 15 #define CONFIG_AM33XX 16 #define CONFIG_ARCH_CPU_INIT 17 #define CONFIG_SYS_CACHELINE_SIZE 64 18 #define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ 19 #define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ 20 #define CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC 21 22 #ifndef CONFIG_SPL_BUILD 23 # define CONFIG_OMAP_SERIAL 24 # define CONFIG_SYS_MALLOC_F_LEN (1 << 10) 25 #endif 26 27 #include <asm/arch/omap.h> 28 29 /* NS16550 Configuration */ 30 #define CONFIG_SYS_NS16550 31 #ifdef CONFIG_SPL_BUILD 32 #define CONFIG_SYS_NS16550_SERIAL 33 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 34 #endif 35 #define CONFIG_SYS_NS16550_CLK 48000000 36 37 /* Network defines. */ 38 #define CONFIG_CMD_NET /* 'bootp' and 'tftp' */ 39 #define CONFIG_CMD_DHCP 40 #define CONFIG_CMD_MII 41 #define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */ 42 #define CONFIG_BOOTP_DNS2 43 #define CONFIG_BOOTP_SEND_HOSTNAME 44 #define CONFIG_BOOTP_GATEWAY 45 #define CONFIG_BOOTP_SUBNETMASK 46 #define CONFIG_NET_RETRY_COUNT 10 47 #define CONFIG_CMD_PING 48 #define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */ 49 #define CONFIG_MII /* Required in net/eth.c */ 50 51 /* 52 * RTC related defines. To use bootcount you must set bootlimit in the 53 * environment to a non-zero value and enable CONFIG_BOOTCOUNT_LIMIT 54 * in the board config. 55 */ 56 #define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000 57 58 /* Enable the HW watchdog, since we can use this with bootcount */ 59 #define CONFIG_HW_WATCHDOG 60 #define CONFIG_OMAP_WATCHDOG 61 62 /* 63 * SPL related defines. The Public RAM memory map the ROM defines the 64 * area between 0x402F0400 and 0x4030B800 as a download area and 65 * 0x4030B800 to 0x4030CE00 as a public stack area. The ROM also 66 * supports X-MODEM loading via UART, and we leverage this and then use 67 * Y-MODEM to load u-boot.img, when booted over UART. 68 */ 69 #define CONFIG_SPL_TEXT_BASE 0x402F0400 70 #define CONFIG_SPL_MAX_SIZE (0x4030B800 - CONFIG_SPL_TEXT_BASE) 71 #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ 72 (128 << 20)) 73 74 /* Enable the watchdog inside of SPL */ 75 #define CONFIG_SPL_WATCHDOG_SUPPORT 76 77 /* 78 * Since SPL did pll and ddr initialization for us, 79 * we don't need to do it twice. 80 */ 81 #if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_NOR_BOOT) 82 #define CONFIG_SKIP_LOWLEVEL_INIT 83 #endif 84 85 /* 86 * When building U-Boot such that there is no previous loader 87 * we need to call board_early_init_f. This is taken care of in 88 * s_init when we have SPL used. 89 */ 90 #if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && !defined(CONFIG_SPL) 91 #define CONFIG_BOARD_EARLY_INIT_F 92 #endif 93 94 #ifdef CONFIG_NAND 95 #define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */ 96 #endif 97 98 /* Now bring in the rest of the common code. */ 99 #include <configs/ti_armv7_common.h> 100 101 #endif /* __CONFIG_TI_AM335X_COMMON_H__ */ 102