1 /* 2 * ti816x_evm.h 3 * 4 * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com> 5 * Antoine Tenart, <atenart@adeneo-embedded.com> 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #ifndef __CONFIG_TI816X_EVM_H 11 #define __CONFIG_TI816X_EVM_H 12 13 #define CONFIG_TI81XX 14 #define CONFIG_TI816X 15 #define CONFIG_SYS_NO_FLASH 16 #define CONFIG_OMAP 17 18 #define CONFIG_ARCH_CPU_INIT 19 20 #include <asm/arch/omap.h> 21 22 #define CONFIG_ENV_SIZE 0x2000 23 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (32 * 1024)) 24 #define CONFIG_SYS_LONGHELP /* undef save memory */ 25 #define CONFIG_MACH_TYPE MACH_TYPE_TI8168EVM 26 27 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 28 #define CONFIG_SETUP_MEMORY_TAGS 29 #define CONFIG_INITRD_TAG /* required for ramdisk support */ 30 31 #define CONFIG_EXTRA_ENV_SETTINGS \ 32 "loadaddr=0x81000000\0" \ 33 34 #define CONFIG_BOOTCOMMAND \ 35 "mmc rescan;" \ 36 "fatload mmc 0 ${loadaddr} uImage;" \ 37 "bootm ${loadaddr}" \ 38 39 #define CONFIG_BOOTARGS "console=ttyO2,115200n8 noinitrd earlyprintk" 40 41 /* Clock Defines */ 42 #define V_OSCK 24000000 /* Clock output from T2 */ 43 #define V_SCLK (V_OSCK >> 1) 44 45 #define CONFIG_SYS_MAXARGS 32 46 #define CONFIG_SYS_CBSIZE 512 /* console I/O buffer size */ 47 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ 48 + sizeof(CONFIG_SYS_PROMPT) + 16) /* print buffer size */ 49 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* boot arg buffer size */ 50 51 #define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */ 52 53 #define CONFIG_CMD_ASKEN 54 #define CONFIG_OMAP_GPIO 55 56 #define CONFIG_FS_FAT 57 58 /* 59 * Only one of the following two options (DDR3/DDR2) should be enabled 60 * CONFIG_TI816X_EVM_DDR2 61 * CONFIG_TI816X_EVM_DDR3 62 */ 63 #define CONFIG_TI816X_EVM_DDR3 64 65 /* 66 * Supported values: 400, 531, 675 or 796 MHz 67 */ 68 #define CONFIG_TI816X_DDR_PLL_796 69 70 #define CONFIG_TI816X_USE_EMIF0 1 71 #define CONFIG_TI816X_USE_EMIF1 1 72 73 #define CONFIG_NR_DRAM_BANKS 2 /* we have 2 banks of DRAM */ 74 #define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */ 75 #define PHYS_DRAM_1_SIZE 0x40000000 /* 1 GB */ 76 #define PHYS_DRAM_2 0xC0000000 /* DRAM Bank #2 */ 77 #define PHYS_DRAM_2_SIZE 0x40000000 /* 1 GB */ 78 79 #define CONFIG_MAX_RAM_BANK_SIZE (2048 << 20) /* 2048MB */ 80 #define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1 81 #define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ 82 GENERATED_GBL_DATA_SIZE) 83 84 /** 85 * Platform/Board specific defs 86 */ 87 #define CONFIG_SYS_CLK_FREQ 27000000 88 #define CONFIG_SYS_TIMERBASE 0x4802E000 89 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 90 91 #undef CONFIG_NAND_OMAP_GPMC 92 93 /* 94 * NS16550 Configuration 95 */ 96 #define CONFIG_SYS_NS16550_SERIAL 97 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 98 #define CONFIG_SYS_NS16550_CLK (48000000) 99 #define CONFIG_SYS_NS16550_COM1 0x48024000 /* Base EVM has UART2 */ 100 101 #define CONFIG_BAUDRATE 115200 102 103 /* allow overwriting serial config and ethaddr */ 104 #define CONFIG_ENV_OVERWRITE 105 106 #define CONFIG_SERIAL1 107 #define CONFIG_SERIAL2 108 #define CONFIG_SERIAL3 109 #define CONFIG_CONS_INDEX 1 110 111 #define CONFIG_ENV_IS_NOWHERE 112 113 /* SPL */ 114 /* Defines for SPL */ 115 #define CONFIG_SPL_FRAMEWORK 116 #define CONFIG_SPL_TEXT_BASE 0x40400000 117 #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ 118 CONFIG_SPL_TEXT_BASE) 119 120 #define CONFIG_SPL_BSS_START_ADDR 0x80000000 121 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ 122 123 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 124 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" 125 126 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 127 #define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000 128 #define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" 129 130 #define CONFIG_SPL_BOARD_INIT 131 132 #define CONFIG_SYS_TEXT_BASE 0x80800000 133 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 134 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 135 136 /* Since SPL did pll and ddr initialization for us, 137 * we don't need to do it twice. 138 */ 139 #ifndef CONFIG_SPL_BUILD 140 #define CONFIG_SKIP_LOWLEVEL_INIT 141 #endif 142 143 /* Unsupported features */ 144 #undef CONFIG_USE_IRQ 145 146 #endif 147