xref: /openbmc/u-boot/include/configs/ti816x_evm.h (revision 76b00aca)
1 /*
2  * ti816x_evm.h
3  *
4  * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
5  * Antoine Tenart, <atenart@adeneo-embedded.com>
6  *
7  * SPDX-License-Identifier:	GPL-2.0+
8  */
9 
10 #ifndef __CONFIG_TI816X_EVM_H
11 #define __CONFIG_TI816X_EVM_H
12 
13 #define CONFIG_TI81XX
14 #define CONFIG_TI816X
15 #define CONFIG_OMAP
16 
17 #define CONFIG_ARCH_CPU_INIT
18 
19 #include <asm/arch/omap.h>
20 
21 #define CONFIG_ENV_SIZE			0x2000
22 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (32 * 1024))
23 #define CONFIG_SYS_LONGHELP		/* undef save memory */
24 #define CONFIG_MACH_TYPE		MACH_TYPE_TI8168EVM
25 
26 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
27 #define CONFIG_SETUP_MEMORY_TAGS
28 #define CONFIG_INITRD_TAG		/* required for ramdisk support */
29 
30 #define CONFIG_EXTRA_ENV_SETTINGS	\
31 	"loadaddr=0x81000000\0"		\
32 
33 #define CONFIG_BOOTCOMMAND			\
34 	"mmc rescan;"				\
35 	"fatload mmc 0 ${loadaddr} uImage;"	\
36 	"bootm ${loadaddr}"			\
37 
38 #define CONFIG_BOOTARGS	"console=ttyO2,115200n8 noinitrd earlyprintk"
39 
40 /* Clock Defines */
41 #define V_OSCK          24000000    /* Clock output from T2 */
42 #define V_SCLK          (V_OSCK >> 1)
43 
44 #define CONFIG_SYS_MAXARGS	32
45 #define CONFIG_SYS_CBSIZE	512 /* console I/O buffer size */
46 #define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE \
47 		+ sizeof(CONFIG_SYS_PROMPT) + 16) /* print buffer size */
48 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* boot arg buffer size */
49 
50 #define CONFIG_SYS_LOAD_ADDR		0x81000000 /* Default load address */
51 
52 #define CONFIG_CMD_ASKEN
53 #define CONFIG_OMAP_GPIO
54 
55 #define CONFIG_FS_FAT
56 
57 /*
58  * Only one of the following two options (DDR3/DDR2) should be enabled
59  * CONFIG_TI816X_EVM_DDR2
60  * CONFIG_TI816X_EVM_DDR3
61  */
62 #define CONFIG_TI816X_EVM_DDR3
63 
64 /*
65  * Supported values: 400, 531, 675 or 796 MHz
66  */
67 #define CONFIG_TI816X_DDR_PLL_796
68 
69 #define CONFIG_TI816X_USE_EMIF0	1
70 #define CONFIG_TI816X_USE_EMIF1	1
71 
72 #define CONFIG_NR_DRAM_BANKS	2		/* we have 2 banks of DRAM */
73 #define PHYS_DRAM_1		0x80000000	/* DRAM Bank #1 */
74 #define PHYS_DRAM_1_SIZE        0x40000000	/* 1 GB */
75 #define PHYS_DRAM_2		0xC0000000	/* DRAM Bank #2 */
76 #define PHYS_DRAM_2_SIZE	0x40000000	/* 1 GB */
77 
78 #define CONFIG_MAX_RAM_BANK_SIZE	(2048 << 20)	/* 2048MB */
79 #define CONFIG_SYS_SDRAM_BASE		PHYS_DRAM_1
80 #define CONFIG_SYS_INIT_SP_ADDR		(NON_SECURE_SRAM_END - \
81 		GENERATED_GBL_DATA_SIZE)
82 
83 /**
84  * Platform/Board specific defs
85  */
86 #define CONFIG_SYS_CLK_FREQ     27000000
87 #define CONFIG_SYS_TIMERBASE    0x4802E000
88 #define CONFIG_SYS_PTV          2   /* Divisor: 2^(PTV+1) => 8 */
89 
90 #undef CONFIG_NAND_OMAP_GPMC
91 
92 /*
93  * NS16550 Configuration
94  */
95 #define CONFIG_SYS_NS16550_SERIAL
96 #define CONFIG_SYS_NS16550_REG_SIZE (-4)
97 #define CONFIG_SYS_NS16550_CLK      (48000000)
98 #define CONFIG_SYS_NS16550_COM1     0x48024000  /* Base EVM has UART2 */
99 
100 /* allow overwriting serial config and ethaddr */
101 #define CONFIG_ENV_OVERWRITE
102 
103 #define CONFIG_SERIAL1
104 #define CONFIG_SERIAL2
105 #define CONFIG_SERIAL3
106 #define CONFIG_CONS_INDEX	1
107 
108 #define CONFIG_ENV_IS_NOWHERE
109 
110 /* SPL */
111 /* Defines for SPL */
112 #define CONFIG_SPL_FRAMEWORK
113 #define CONFIG_SPL_TEXT_BASE    0x40400000
114 #define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - \
115 					 CONFIG_SPL_TEXT_BASE)
116 
117 #define CONFIG_SPL_BSS_START_ADDR   0x80000000
118 #define CONFIG_SPL_BSS_MAX_SIZE     0x80000     /* 512 KB */
119 
120 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
121 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
122 
123 #define CONFIG_SYS_SPI_U_BOOT_OFFS  0x20000
124 #define CONFIG_SYS_SPI_U_BOOT_SIZE  0x40000
125 #define CONFIG_SPL_LDSCRIPT     "arch/arm/mach-omap2/u-boot-spl.lds"
126 
127 #define CONFIG_SPL_BOARD_INIT
128 
129 #define CONFIG_SYS_TEXT_BASE        0x80800000
130 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000
131 #define CONFIG_SYS_SPL_MALLOC_SIZE  0x100000
132 
133 /* Since SPL did pll and ddr initialization for us,
134  * we don't need to do it twice.
135  */
136 #ifndef CONFIG_SPL_BUILD
137 #define CONFIG_SKIP_LOWLEVEL_INIT
138 #endif
139 
140 /* Unsupported features */
141 #undef CONFIG_USE_IRQ
142 
143 #endif
144