xref: /openbmc/u-boot/include/configs/thuban.h (revision d9b23e26)
1 /*
2  * (C) Copyright 2013 Siemens Schweiz AG
3  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
4  *
5  * Based on:
6  * U-Boot file:/include/configs/am335x_evm.h
7  *
8  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
9  *
10  * SPDX-License-Identifier:	GPL-2.0+
11  */
12 
13 #ifndef __CONFIG_THUBAN_H
14 #define __CONFIG_THUBAN_H
15 
16 #include "siemens-am33x-common.h"
17 
18 #define DDR_PLL_FREQ	303
19 #undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
20 
21 #define BOARD_DFU_BUTTON_GPIO	27	/* Use as default */
22 #define GPIO_LAN9303_NRST	88	/* GPIO2_24 = gpio88 */
23 
24 #define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
25 	"button_dfu0=27\0" \
26 	"led0=103,1,0\0" \
27 	"led1=64,0,1\0"
28 
29  /* Physical Memory Map */
30 #define CONFIG_MAX_RAM_BANK_SIZE	(1024 << 20)	/* 1GB */
31 
32 /* I2C Configuration */
33 #define CONFIG_SYS_I2C_SPEED		100000
34 
35 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
36 #define EEPROM_ADDR_DDR3 0x90
37 #define EEPROM_ADDR_CHIP 0x120
38 
39 #undef CONFIG_MII
40 #define CONFIG_PHY_SMSC
41 
42 #define CONFIG_FACTORYSET
43 
44 /* Define own nand partitions */
45 #define CONFIG_ENV_OFFSET_REDUND    0x2E0000
46 #define CONFIG_ENV_SIZE_REDUND      0x2000
47 #define CONFIG_ENV_RANGE        (4 * CONFIG_SYS_ENV_SECT_SIZE)
48 
49 #define MTDPARTS_DEFAULT	MTDPARTS_DEFAULT_V2
50 
51 #ifndef CONFIG_SPL_BUILD
52 
53 /* Default env settings */
54 #define CONFIG_EXTRA_ENV_SETTINGS \
55 	"hostname=thuban\0" \
56 	"ubi_off=2048\0"\
57 	"nand_img_size=0x400000\0" \
58 	"optargs=\0" \
59 	"preboot=draco_led 0\0" \
60 	CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
61 	CONFIG_ENV_SETTINGS_V2 \
62 	CONFIG_ENV_SETTINGS_NAND_V2
63 
64 #ifndef CONFIG_RESTORE_FLASH
65 /* set to negative value for no autoboot */
66 
67 #define CONFIG_BOOTCOMMAND \
68 "if dfubutton; then " \
69 	"run dfu_start; " \
70 	"reset; " \
71 "fi;" \
72 "run nand_boot;" \
73 "run nand_boot_backup;" \
74 "reset;"
75 
76 #else
77 
78 #define CONFIG_BOOTCOMMAND			\
79 	"setenv autoload no; "			\
80 	"dhcp; "				\
81 	"if tftp 80000000 debrick.scr; then "	\
82 		"source 80000000; "		\
83 	"fi"
84 #endif
85 #endif	/* CONFIG_SPL_BUILD */
86 #endif	/* ! __CONFIG_THUBAN_H */
87