xref: /openbmc/u-boot/include/configs/thuban.h (revision be059e88)
1 /*
2  * (C) Copyright 2013 Siemens Schweiz AG
3  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
4  *
5  * Based on:
6  * U-Boot file:/include/configs/am335x_evm.h
7  *
8  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
9  *
10  * SPDX-License-Identifier:	GPL-2.0+
11  */
12 
13 #ifndef __CONFIG_THUBAN_H
14 #define __CONFIG_THUBAN_H
15 
16 #include "siemens-am33x-common.h"
17 
18 #define CONFIG_SYS_MPUCLK	300
19 #define DDR_PLL_FREQ	303
20 #undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
21 
22 #define BOARD_DFU_BUTTON_GPIO	27	/* Use as default */
23 #define GPIO_LAN9303_NRST	88	/* GPIO2_24 = gpio88 */
24 
25 #define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
26 	"button_dfu0=27\0" \
27 	"led0=103,1,0\0" \
28 	"led1=64,0,1\0"
29 
30  /* Physical Memory Map */
31 #define CONFIG_MAX_RAM_BANK_SIZE	(1024 << 20)	/* 1GB */
32 
33 /* I2C Configuration */
34 #define CONFIG_SYS_I2C_SPEED		100000
35 
36 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
37 #define EEPROM_ADDR_DDR3 0x90
38 #define EEPROM_ADDR_CHIP 0x120
39 
40 #undef CONFIG_MII
41 #undef CONFIG_PHY_GIGE
42 #define CONFIG_PHY_SMSC
43 
44 #define CONFIG_FACTORYSET
45 
46 /* Watchdog */
47 #define CONFIG_OMAP_WATCHDOG
48 
49 /* Define own nand partitions */
50 #define CONFIG_ENV_OFFSET_REDUND    0x2E0000
51 #define CONFIG_ENV_SIZE_REDUND      0x2000
52 #define CONFIG_ENV_RANGE        (4 * CONFIG_SYS_ENV_SECT_SIZE)
53 
54 #define MTDPARTS_DEFAULT	MTDPARTS_DEFAULT_V2
55 
56 #ifndef CONFIG_SPL_BUILD
57 
58 /* Default env settings */
59 #define CONFIG_EXTRA_ENV_SETTINGS \
60 	"hostname=thuban\0" \
61 	"ubi_off=2048\0"\
62 	"nand_img_size=0x400000\0" \
63 	"optargs=\0" \
64 	"preboot=draco_led 0\0" \
65 	CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
66 	CONFIG_ENV_SETTINGS_V2 \
67 	CONFIG_ENV_SETTINGS_NAND_V2
68 
69 #ifndef CONFIG_RESTORE_FLASH
70 /* set to negative value for no autoboot */
71 
72 #define CONFIG_BOOTCOMMAND \
73 "if dfubutton; then " \
74 	"run dfu_start; " \
75 	"reset; " \
76 "fi;" \
77 "run nand_boot;" \
78 "run nand_boot_backup;" \
79 "reset;"
80 
81 #else
82 
83 #define CONFIG_BOOTCOMMAND			\
84 	"setenv autoload no; "			\
85 	"dhcp; "				\
86 	"if tftp 80000000 debrick.scr; then "	\
87 		"source 80000000; "		\
88 	"fi"
89 #endif
90 #endif	/* CONFIG_SPL_BUILD */
91 #endif	/* ! __CONFIG_THUBAN_H */
92