1 /* 2 * Copyright (C) 2015-2016 Stefan Roese <sr@denx.de> 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef _CONFIG_THEADORABLE_H 8 #define _CONFIG_THEADORABLE_H 9 10 /* 11 * High Level Configuration Options (easy to change) 12 */ 13 #define CONFIG_DISPLAY_BOARDINFO_LATE 14 15 /* 16 * TEXT_BASE needs to be below 16MiB, since this area is scrubbed 17 * for DDR ECC byte filling in the SPL before loading the main 18 * U-Boot into it. 19 */ 20 #define CONFIG_SYS_TEXT_BASE 0x00800000 21 #define CONFIG_SYS_TCLK 250000000 /* 250MHz */ 22 23 /* 24 * Commands configuration 25 */ 26 #define CONFIG_CMD_ENV 27 #define CONFIG_CMD_SATA 28 29 /* 30 * The debugging version enables USB support via defconfig. 31 * This version should also enable all other non-production 32 * interfaces / features. 33 */ 34 #ifdef CONFIG_USB 35 #define CONFIG_CMD_PCI 36 #endif 37 38 /* I2C */ 39 #define CONFIG_SYS_I2C 40 #define CONFIG_SYS_I2C_MVTWSI 41 #define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE 42 #define CONFIG_I2C_MVTWSI_BASE1 MVEBU_TWSI1_BASE 43 #define CONFIG_SYS_I2C_SLAVE 0x0 44 #define CONFIG_SYS_I2C_SPEED 100000 45 46 /* USB/EHCI configuration */ 47 #define CONFIG_EHCI_IS_TDI 48 #define CONFIG_USB_MAX_CONTROLLER_COUNT 3 49 50 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ 51 52 /* SPI NOR flash default params, used by sf commands */ 53 #define CONFIG_SF_DEFAULT_SPEED 27777777 /* for fast SPL booting */ 54 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 55 56 /* Environment in SPI NOR flash */ 57 #define CONFIG_ENV_IS_IN_SPI_FLASH 58 #define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */ 59 #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ 60 #define CONFIG_ENV_SECT_SIZE (256 << 10) /* 256KiB sectors */ 61 #define CONFIG_ENV_OVERWRITE 62 63 #define CONFIG_PHY_MARVELL /* there is a marvell phy */ 64 #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ 65 66 #define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */ 67 #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ 68 #define CONFIG_SYS_ALT_MEMTEST 69 #define CONFIG_PREBOOT 70 71 /* Keep device tree and initrd in lower memory so the kernel can access them */ 72 #define CONFIG_EXTRA_ENV_SETTINGS \ 73 "fdt_high=0x10000000\0" \ 74 "initrd_high=0x10000000\0" 75 76 /* SATA support */ 77 #define CONFIG_SYS_SATA_MAX_DEVICE 1 78 #define CONFIG_SATA_MV 79 #define CONFIG_LIBATA 80 #define CONFIG_LBA48 81 #define CONFIG_EFI_PARTITION 82 #define CONFIG_DOS_PARTITION 83 84 /* Additional FS support/configuration */ 85 #define CONFIG_SUPPORT_VFAT 86 87 /* PCIe support */ 88 #ifdef CONFIG_CMD_PCI 89 #ifndef CONFIG_SPL_BUILD 90 #define CONFIG_PCI 91 #define CONFIG_PCI_MVEBU 92 #define CONFIG_PCI_PNP 93 #define CONFIG_BOARD_LATE_INIT /* for PEX switch test */ 94 #endif 95 #endif 96 97 /* Enable LCD and reserve 512KB from top of memory*/ 98 #define CONFIG_SYS_MEM_TOP_HIDE 0x80000 99 100 #define CONFIG_VIDEO 101 #define CONFIG_CFB_CONSOLE 102 #define CONFIG_VGA_AS_SINGLE_DEVICE 103 #define CONFIG_CMD_BMP 104 105 /* FPGA programming support */ 106 #define CONFIG_FPGA 107 #define CONFIG_FPGA_ALTERA 108 #define CONFIG_FPGA_STRATIX_V 109 110 /* 111 * Bootcounter 112 */ 113 #define CONFIG_BOOTCOUNT_LIMIT 114 #define CONFIG_BOOTCOUNT_RAM 115 /* Max size of RAM minus BOOTCOUNT_ADDR is the bootcounter address */ 116 #define BOOTCOUNT_ADDR 0x1000 117 118 /* 119 * mv-common.h should be defined after CMD configs since it used them 120 * to enable certain macros 121 */ 122 #include "mv-common.h" 123 124 /* 125 * Memory layout while starting into the bin_hdr via the 126 * BootROM: 127 * 128 * 0x4000.4000 - 0x4003.4000 headers space (192KiB) 129 * 0x4000.4030 bin_hdr start address 130 * 0x4003.4000 - 0x4004.7c00 BootROM memory allocations (15KiB) 131 * 0x4007.fffc BootROM stack top 132 * 133 * The address space between 0x4007.fffc and 0x400f.fff is not locked in 134 * L2 cache thus cannot be used. 135 */ 136 137 /* SPL */ 138 /* Defines for SPL */ 139 #define CONFIG_SPL_FRAMEWORK 140 #define CONFIG_SPL_TEXT_BASE 0x40004030 141 #define CONFIG_SPL_MAX_SIZE ((128 << 10) - 0x4030) 142 143 #define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10)) 144 #define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) 145 146 #ifdef CONFIG_SPL_BUILD 147 #define CONFIG_SYS_MALLOC_SIMPLE 148 #endif 149 150 #define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) 151 #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) 152 153 #define CONFIG_SPL_LIBCOMMON_SUPPORT 154 #define CONFIG_SPL_LIBGENERIC_SUPPORT 155 #define CONFIG_SPL_SERIAL_SUPPORT 156 #define CONFIG_SPL_I2C_SUPPORT 157 158 /* SPL related SPI defines */ 159 #define CONFIG_SPL_SPI_SUPPORT 160 #define CONFIG_SPL_SPI_FLASH_SUPPORT 161 #define CONFIG_SPL_SPI_LOAD 162 #define CONFIG_SPL_SPI_BUS 0 163 #define CONFIG_SPL_SPI_CS 0 164 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x1a000 165 #define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS 166 167 /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */ 168 #define CONFIG_DDR_FIXED_SIZE (2 << 20) /* 2GiB */ 169 170 #endif /* _CONFIG_THEADORABLE_H */ 171