1 /* 2 * Copyright (C) 2015-2016 Stefan Roese <sr@denx.de> 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef _CONFIG_THEADORABLE_H 8 #define _CONFIG_THEADORABLE_H 9 10 /* 11 * High Level Configuration Options (easy to change) 12 */ 13 #define CONFIG_DISPLAY_BOARDINFO_LATE 14 15 /* 16 * TEXT_BASE needs to be below 16MiB, since this area is scrubbed 17 * for DDR ECC byte filling in the SPL before loading the main 18 * U-Boot into it. 19 */ 20 #define CONFIG_SYS_TEXT_BASE 0x00800000 21 #define CONFIG_SYS_TCLK 250000000 /* 250MHz */ 22 23 /* 24 * Commands configuration 25 */ 26 #define CONFIG_CMD_BOOTZ 27 #define CONFIG_CMD_CACHE 28 #define CONFIG_CMD_ENV 29 #define CONFIG_CMD_EXT2 30 #define CONFIG_CMD_EXT4 31 #define CONFIG_CMD_FAT 32 #define CONFIG_CMD_FS_GENERIC 33 #define CONFIG_CMD_I2C 34 #define CONFIG_CMD_SATA 35 #define CONFIG_CMD_TIME 36 37 /* 38 * The debugging version enables USB support via defconfig. 39 * This version should also enable all other non-production 40 * interfaces / features. 41 */ 42 #ifdef CONFIG_USB 43 #define CONFIG_CMD_DHCP 44 #define CONFIG_CMD_PCI 45 #define CONFIG_CMD_PING 46 #define CONFIG_CMD_SPI 47 #define CONFIG_CMD_TFTPPUT 48 #endif 49 50 /* I2C */ 51 #define CONFIG_SYS_I2C 52 #define CONFIG_SYS_I2C_MVTWSI 53 #define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE 54 #define CONFIG_SYS_I2C_SLAVE 0x0 55 #define CONFIG_SYS_I2C_SPEED 100000 56 57 /* USB/EHCI configuration */ 58 #define CONFIG_EHCI_IS_TDI 59 #define CONFIG_USB_MAX_CONTROLLER_COUNT 3 60 61 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ 62 63 /* SPI NOR flash default params, used by sf commands */ 64 #define CONFIG_SF_DEFAULT_SPEED 27777777 /* for fast SPL booting */ 65 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 66 67 /* Environment in SPI NOR flash */ 68 #define CONFIG_ENV_IS_IN_SPI_FLASH 69 #define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */ 70 #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ 71 #define CONFIG_ENV_SECT_SIZE (256 << 10) /* 256KiB sectors */ 72 #define CONFIG_ENV_OVERWRITE 73 74 #define CONFIG_PHY_MARVELL /* there is a marvell phy */ 75 #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ 76 77 #define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */ 78 #define CONFIG_SYS_ALT_MEMTEST 79 #define CONFIG_PREBOOT 80 81 #define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ 82 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 83 84 /* Keep device tree and initrd in lower memory so the kernel can access them */ 85 #define CONFIG_EXTRA_ENV_SETTINGS \ 86 "fdt_high=0x10000000\0" \ 87 "initrd_high=0x10000000\0" 88 89 /* SATA support */ 90 #define CONFIG_SYS_SATA_MAX_DEVICE 1 91 #define CONFIG_SATA_MV 92 #define CONFIG_LIBATA 93 #define CONFIG_LBA48 94 #define CONFIG_EFI_PARTITION 95 #define CONFIG_DOS_PARTITION 96 97 /* Additional FS support/configuration */ 98 #define CONFIG_SUPPORT_VFAT 99 100 /* PCIe support */ 101 #ifdef CONFIG_CMD_PCI 102 #ifndef CONFIG_SPL_BUILD 103 #define CONFIG_PCI 104 #define CONFIG_PCI_MVEBU 105 #define CONFIG_PCI_PNP 106 #endif 107 #endif 108 109 /* Enable LCD and reserve 512KB from top of memory*/ 110 #define CONFIG_SYS_MEM_TOP_HIDE 0x80000 111 112 #define CONFIG_VIDEO 113 #define CONFIG_CFB_CONSOLE 114 #define CONFIG_VGA_AS_SINGLE_DEVICE 115 #define CONFIG_CMD_BMP 116 117 /* FPGA programming support */ 118 #define CONFIG_FPGA 119 #define CONFIG_FPGA_ALTERA 120 #define CONFIG_FPGA_STRATIX_V 121 122 /* 123 * mv-common.h should be defined after CMD configs since it used them 124 * to enable certain macros 125 */ 126 #include "mv-common.h" 127 128 /* 129 * Memory layout while starting into the bin_hdr via the 130 * BootROM: 131 * 132 * 0x4000.4000 - 0x4003.4000 headers space (192KiB) 133 * 0x4000.4030 bin_hdr start address 134 * 0x4003.4000 - 0x4004.7c00 BootROM memory allocations (15KiB) 135 * 0x4007.fffc BootROM stack top 136 * 137 * The address space between 0x4007.fffc and 0x400f.fff is not locked in 138 * L2 cache thus cannot be used. 139 */ 140 141 /* SPL */ 142 /* Defines for SPL */ 143 #define CONFIG_SPL_FRAMEWORK 144 #define CONFIG_SPL_TEXT_BASE 0x40004030 145 #define CONFIG_SPL_MAX_SIZE ((128 << 10) - 0x4030) 146 147 #define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10)) 148 #define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) 149 150 #ifdef CONFIG_SPL_BUILD 151 #define CONFIG_SYS_MALLOC_SIMPLE 152 #endif 153 154 #define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) 155 #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) 156 157 #define CONFIG_SPL_LIBCOMMON_SUPPORT 158 #define CONFIG_SPL_LIBGENERIC_SUPPORT 159 #define CONFIG_SPL_SERIAL_SUPPORT 160 #define CONFIG_SPL_I2C_SUPPORT 161 162 /* SPL related SPI defines */ 163 #define CONFIG_SPL_SPI_SUPPORT 164 #define CONFIG_SPL_SPI_FLASH_SUPPORT 165 #define CONFIG_SPL_SPI_LOAD 166 #define CONFIG_SPL_SPI_BUS 0 167 #define CONFIG_SPL_SPI_CS 0 168 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x1a000 169 #define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS 170 171 /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */ 172 #define CONFIG_DDR_FIXED_SIZE (2 << 20) /* 2GiB */ 173 174 #endif /* _CONFIG_THEADORABLE_H */ 175