1 /* 2 * Copyright (C) 2015-2016 Stefan Roese <sr@denx.de> 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef _CONFIG_THEADORABLE_H 8 #define _CONFIG_THEADORABLE_H 9 10 /* 11 * High Level Configuration Options (easy to change) 12 */ 13 #define CONFIG_DISPLAY_BOARDINFO_LATE 14 15 /* 16 * TEXT_BASE needs to be below 16MiB, since this area is scrubbed 17 * for DDR ECC byte filling in the SPL before loading the main 18 * U-Boot into it. 19 */ 20 #define CONFIG_SYS_TEXT_BASE 0x00800000 21 #define CONFIG_SYS_TCLK 250000000 /* 250MHz */ 22 23 /* 24 * Commands configuration 25 */ 26 #define CONFIG_CMD_ENV 27 #define CONFIG_CMD_SATA 28 29 /* 30 * The debugging version enables USB support via defconfig. 31 * This version should also enable all other non-production 32 * interfaces / features. 33 */ 34 #ifdef CONFIG_USB 35 #define CONFIG_CMD_PCI 36 #endif 37 38 /* I2C */ 39 #define CONFIG_SYS_I2C 40 #define CONFIG_SYS_I2C_MVTWSI 41 #define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE 42 #define CONFIG_I2C_MVTWSI_BASE1 MVEBU_TWSI1_BASE 43 #define CONFIG_SYS_I2C_SLAVE 0x0 44 #define CONFIG_SYS_I2C_SPEED 100000 45 46 /* USB/EHCI configuration */ 47 #define CONFIG_EHCI_IS_TDI 48 #define CONFIG_USB_MAX_CONTROLLER_COUNT 3 49 50 /* SPI NOR flash default params, used by sf commands */ 51 #define CONFIG_SF_DEFAULT_SPEED 27777777 /* for fast SPL booting */ 52 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 53 54 /* Environment in SPI NOR flash */ 55 #define CONFIG_ENV_IS_IN_SPI_FLASH 56 #define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */ 57 #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ 58 #define CONFIG_ENV_SECT_SIZE (256 << 10) /* 256KiB sectors */ 59 #define CONFIG_ENV_OVERWRITE 60 61 #define CONFIG_PHY_MARVELL /* there is a marvell phy */ 62 #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ 63 64 #define CONFIG_SYS_ALT_MEMTEST 65 #define CONFIG_PREBOOT 66 67 /* Keep device tree and initrd in lower memory so the kernel can access them */ 68 #define CONFIG_EXTRA_ENV_SETTINGS \ 69 "fdt_high=0x10000000\0" \ 70 "initrd_high=0x10000000\0" 71 72 /* SATA support */ 73 #define CONFIG_SYS_SATA_MAX_DEVICE 1 74 #define CONFIG_SATA_MV 75 #define CONFIG_LIBATA 76 #define CONFIG_LBA48 77 78 /* Additional FS support/configuration */ 79 #define CONFIG_SUPPORT_VFAT 80 81 /* PCIe support */ 82 #ifdef CONFIG_CMD_PCI 83 #ifndef CONFIG_SPL_BUILD 84 #define CONFIG_PCI_MVEBU 85 #endif 86 #endif 87 88 /* Enable LCD and reserve 512KB from top of memory*/ 89 #define CONFIG_SYS_MEM_TOP_HIDE 0x80000 90 91 #define CONFIG_CMD_BMP 92 93 /* FPGA programming support */ 94 #define CONFIG_FPGA 95 #define CONFIG_FPGA_ALTERA 96 #define CONFIG_FPGA_STRATIX_V 97 98 /* 99 * Bootcounter 100 */ 101 #define CONFIG_BOOTCOUNT_LIMIT 102 #define CONFIG_BOOTCOUNT_RAM 103 /* Max size of RAM minus BOOTCOUNT_ADDR is the bootcounter address */ 104 #define BOOTCOUNT_ADDR 0x1000 105 106 /* 107 * mv-common.h should be defined after CMD configs since it used them 108 * to enable certain macros 109 */ 110 #include "mv-common.h" 111 112 /* 113 * Memory layout while starting into the bin_hdr via the 114 * BootROM: 115 * 116 * 0x4000.4000 - 0x4003.4000 headers space (192KiB) 117 * 0x4000.4030 bin_hdr start address 118 * 0x4003.4000 - 0x4004.7c00 BootROM memory allocations (15KiB) 119 * 0x4007.fffc BootROM stack top 120 * 121 * The address space between 0x4007.fffc and 0x400f.fff is not locked in 122 * L2 cache thus cannot be used. 123 */ 124 125 /* SPL */ 126 /* Defines for SPL */ 127 #define CONFIG_SPL_FRAMEWORK 128 #define CONFIG_SPL_TEXT_BASE 0x40004030 129 #define CONFIG_SPL_MAX_SIZE ((128 << 10) - 0x4030) 130 131 #define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10)) 132 #define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) 133 134 #ifdef CONFIG_SPL_BUILD 135 #define CONFIG_SYS_MALLOC_SIMPLE 136 #endif 137 138 #define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) 139 #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) 140 141 /* SPL related SPI defines */ 142 #define CONFIG_SPL_SPI_LOAD 143 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x1a000 144 #define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS 145 146 /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */ 147 #define CONFIG_DDR_FIXED_SIZE (2 << 20) /* 2GiB */ 148 149 #endif /* _CONFIG_THEADORABLE_H */ 150