1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright (C) 2015-2016 Stefan Roese <sr@denx.de> 4 */ 5 6 #ifndef _CONFIG_THEADORABLE_H 7 #define _CONFIG_THEADORABLE_H 8 9 /* 10 * High Level Configuration Options (easy to change) 11 */ 12 13 /* 14 * TEXT_BASE needs to be below 16MiB, since this area is scrubbed 15 * for DDR ECC byte filling in the SPL before loading the main 16 * U-Boot into it. 17 */ 18 #define CONFIG_SYS_TCLK 250000000 /* 250MHz */ 19 20 /* 21 * Commands configuration 22 */ 23 24 /* 25 * The debugging version enables USB support via defconfig. 26 * This version should also enable all other non-production 27 * interfaces / features. 28 */ 29 30 /* I2C */ 31 #define CONFIG_SYS_I2C 32 #define CONFIG_SYS_I2C_MVTWSI 33 #define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE 34 #define CONFIG_I2C_MVTWSI_BASE1 MVEBU_TWSI1_BASE 35 #define CONFIG_SYS_I2C_SLAVE 0x0 36 #define CONFIG_SYS_I2C_SPEED 100000 37 38 /* USB/EHCI configuration */ 39 #define CONFIG_EHCI_IS_TDI 40 #define CONFIG_USB_MAX_CONTROLLER_COUNT 3 41 42 /* SPI NOR flash default params, used by sf commands */ 43 44 /* Environment in SPI NOR flash */ 45 #define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */ 46 #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ 47 #define CONFIG_ENV_SECT_SIZE (256 << 10) /* 256KiB sectors */ 48 #define CONFIG_ENV_OVERWRITE 49 50 #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ 51 52 #define CONFIG_PREBOOT 53 54 /* Keep device tree and initrd in lower memory so the kernel can access them */ 55 #define CONFIG_EXTRA_ENV_SETTINGS \ 56 "fdt_high=0x10000000\0" \ 57 "initrd_high=0x10000000\0" 58 59 /* SATA support */ 60 #define CONFIG_SYS_SATA_MAX_DEVICE 1 61 #define CONFIG_LBA48 62 63 /* Enable LCD and reserve 512KB from top of memory*/ 64 #define CONFIG_SYS_MEM_TOP_HIDE 0x80000 65 66 #define CONFIG_BMP_16BPP 67 #define CONFIG_BMP_24BPP 68 #define CONFIG_BMP_32BPP 69 70 /* FPGA programming support */ 71 #define CONFIG_FPGA_STRATIX_V 72 73 /* 74 * Bootcounter 75 */ 76 /* Max size of RAM minus BOOTCOUNT_ADDR is the bootcounter address */ 77 #define BOOTCOUNT_ADDR 0x1000 78 79 /* 80 * mv-common.h should be defined after CMD configs since it used them 81 * to enable certain macros 82 */ 83 #include "mv-common.h" 84 85 /* 86 * Memory layout while starting into the bin_hdr via the 87 * BootROM: 88 * 89 * 0x4000.4000 - 0x4003.4000 headers space (192KiB) 90 * 0x4000.4030 bin_hdr start address 91 * 0x4003.4000 - 0x4004.7c00 BootROM memory allocations (15KiB) 92 * 0x4007.fffc BootROM stack top 93 * 94 * The address space between 0x4007.fffc and 0x400f.fff is not locked in 95 * L2 cache thus cannot be used. 96 */ 97 98 /* SPL */ 99 /* Defines for SPL */ 100 #define CONFIG_SPL_TEXT_BASE 0x40004030 101 #define CONFIG_SPL_MAX_SIZE ((128 << 10) - 0x4030) 102 103 #define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10)) 104 #define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) 105 106 #ifdef CONFIG_SPL_BUILD 107 #define CONFIG_SYS_MALLOC_SIMPLE 108 #endif 109 110 #define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) 111 #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) 112 113 /* SPL related SPI defines */ 114 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x1a000 115 #define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS 116 117 /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */ 118 #define CONFIG_DDR_FIXED_SIZE (2 << 20) /* 2GiB */ 119 120 #endif /* _CONFIG_THEADORABLE_H */ 121