1 /*
2  *  (C) Copyright 2010-2012
3  *  NVIDIA Corporation <www.nvidia.com>
4  *
5  * SPDX-License-Identifier:	GPL-2.0+
6  */
7 
8 #ifndef _TEGRA30_COMMON_H_
9 #define _TEGRA30_COMMON_H_
10 #include "tegra-common.h"
11 
12 /*
13  * NS16550 Configuration
14  */
15 #define V_NS16550_CLK		408000000	/* 408MHz (pllp_out0) */
16 
17 /*
18  * Miscellaneous configurable options
19  */
20 #define CONFIG_STACKBASE	0x82800000	/* 40MB */
21 
22 /*-----------------------------------------------------------------------
23  * Physical Memory Map
24  */
25 #define CONFIG_SYS_TEXT_BASE	0x80110000
26 
27 /*
28  * Memory layout for where various images get loaded by boot scripts:
29  *
30  * scriptaddr can be pretty much anywhere that doesn't conflict with something
31  *   else. Put it above BOOTMAPSZ to eliminate conflicts.
32  *
33  * pxefile_addr_r can be pretty much anywhere that doesn't conflict with
34  *   something else. Put it above BOOTMAPSZ to eliminate conflicts.
35  *
36  * kernel_addr_r must be within the first 128M of RAM in order for the
37  *   kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
38  *   decompress itself to 0x8000 after the start of RAM, kernel_addr_r
39  *   should not overlap that area, or the kernel will have to copy itself
40  *   somewhere else before decompression. Similarly, the address of any other
41  *   data passed to the kernel shouldn't overlap the start of RAM. Pushing
42  *   this up to 16M allows for a sizable kernel to be decompressed below the
43  *   compressed load address.
44  *
45  * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for
46  *   the compressed kernel to be up to 16M too.
47  *
48  * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows
49  *   for the FDT/DTB to be up to 1M, which is hopefully plenty.
50  */
51 #define CONFIG_LOADADDR 0x81000000
52 #define MEM_LAYOUT_ENV_SETTINGS \
53 	"scriptaddr=0x90000000\0" \
54 	"pxefile_addr_r=0x90100000\0" \
55 	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
56 	"fdt_addr_r=0x82000000\0" \
57 	"ramdisk_addr_r=0x82100000\0"
58 
59 /* Defines for SPL */
60 #define CONFIG_SPL_TEXT_BASE		0x80108000
61 #define CONFIG_SYS_SPL_MALLOC_START	0x80090000
62 #define CONFIG_SPL_STACK		0x800ffffc
63 
64 /* For USB EHCI controller */
65 #define CONFIG_EHCI_IS_TDI
66 #define CONFIG_USB_EHCI_TXFIFO_THRESH	0x10
67 
68 #endif /* _TEGRA30_COMMON_H_ */
69