1 /*
2  * (C) Copyright 2013-2015
3  * NVIDIA Corporation <www.nvidia.com>
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7 
8 #ifndef _TEGRA210_COMMON_H_
9 #define _TEGRA210_COMMON_H_
10 
11 #include "tegra-common.h"
12 
13 /* Cortex-A57 uses a cache line size of 64 bytes */
14 #define CONFIG_SYS_CACHELINE_SIZE	64
15 
16 /*
17  * NS16550 Configuration
18  */
19 #define V_NS16550_CLK		408000000	/* 408MHz (pllp_out0) */
20 
21 /*
22  * Miscellaneous configurable options
23  */
24 #define CONFIG_STACKBASE	0x82800000	/* 40MB */
25 
26 /*-----------------------------------------------------------------------
27  * Physical Memory Map
28  */
29 #define CONFIG_SYS_TEXT_BASE	0x80110000
30 
31 /* Generic Interrupt Controller */
32 #define CONFIG_GICV2
33 
34 /*
35  * Memory layout for where various images get loaded by boot scripts:
36  *
37  * scriptaddr can be pretty much anywhere that doesn't conflict with something
38  *   else. Put it above BOOTMAPSZ to eliminate conflicts.
39  *
40  * pxefile_addr_r can be pretty much anywhere that doesn't conflict with
41  *   something else. Put it above BOOTMAPSZ to eliminate conflicts.
42  *
43  * kernel_addr_r must be within the first 128M of RAM in order for the
44  *   kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
45  *   decompress itself to 0x8000 after the start of RAM, kernel_addr_r
46  *   should not overlap that area, or the kernel will have to copy itself
47  *   somewhere else before decompression. Similarly, the address of any other
48  *   data passed to the kernel shouldn't overlap the start of RAM. Pushing
49  *   this up to 16M allows for a sizable kernel to be decompressed below the
50  *   compressed load address.
51  *
52  * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for
53  *   the compressed kernel to be up to 16M too.
54  *
55  * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows
56  *   for the FDT/DTB to be up to 1M, which is hopefully plenty.
57  */
58 #define CONFIG_LOADADDR 0x80080000
59 #define MEM_LAYOUT_ENV_SETTINGS \
60 	"scriptaddr=0x90000000\0" \
61 	"pxefile_addr_r=0x90100000\0" \
62 	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
63 	"fdt_addr_r=0x82000000\0" \
64 	"ramdisk_addr_r=0x82100000\0"
65 
66 /* Defines for SPL */
67 #define CONFIG_SPL_TEXT_BASE		0x80108000
68 #define CONFIG_SYS_SPL_MALLOC_START	0x80090000
69 #define CONFIG_SPL_STACK		0x800ffffc
70 
71 /* For USB EHCI controller */
72 #define CONFIG_EHCI_IS_TDI
73 #define CONFIG_USB_EHCI_TXFIFO_THRESH	0x10
74 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
75 
76 /* GPU needs setup */
77 #define CONFIG_TEGRA_GPU
78 
79 #endif /* _TEGRA210_COMMON_H_ */
80