1 /* 2 * (C) Copyright 2013-2015 3 * NVIDIA Corporation <www.nvidia.com> 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #ifndef _TEGRA210_COMMON_H_ 9 #define _TEGRA210_COMMON_H_ 10 11 #include "tegra-common.h" 12 13 /* 14 * NS16550 Configuration 15 */ 16 #define V_NS16550_CLK 408000000 /* 408MHz (pllp_out0) */ 17 18 /*----------------------------------------------------------------------- 19 * Physical Memory Map 20 */ 21 22 /* Generic Interrupt Controller */ 23 #define CONFIG_GICV2 24 25 /* 26 * Memory layout for where various images get loaded by boot scripts: 27 * 28 * scriptaddr can be pretty much anywhere that doesn't conflict with something 29 * else. Put it above BOOTMAPSZ to eliminate conflicts. 30 * 31 * pxefile_addr_r can be pretty much anywhere that doesn't conflict with 32 * something else. Put it above BOOTMAPSZ to eliminate conflicts. 33 * 34 * kernel_addr_r must be within the first 128M of RAM in order for the 35 * kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will 36 * decompress itself to 0x8000 after the start of RAM, kernel_addr_r 37 * should not overlap that area, or the kernel will have to copy itself 38 * somewhere else before decompression. Similarly, the address of any other 39 * data passed to the kernel shouldn't overlap the start of RAM. Pushing 40 * this up to 16M allows for a sizable kernel to be decompressed below the 41 * compressed load address. 42 * 43 * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for 44 * the compressed kernel to be up to 16M too. 45 * 46 * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows 47 * for the FDT/DTB to be up to 1M, which is hopefully plenty. 48 */ 49 #define CONFIG_LOADADDR 0x80080000 50 #define MEM_LAYOUT_ENV_SETTINGS \ 51 "scriptaddr=0x90000000\0" \ 52 "pxefile_addr_r=0x90100000\0" \ 53 "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ 54 "fdt_addr_r=0x82000000\0" \ 55 "ramdisk_addr_r=0x82100000\0" 56 57 /* For USB EHCI controller */ 58 #define CONFIG_EHCI_IS_TDI 59 #define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10 60 61 /* GPU needs setup */ 62 #define CONFIG_TEGRA_GPU 63 64 #endif /* _TEGRA210_COMMON_H_ */ 65