1 /* 2 * (C) Copyright 2010-2012 3 * NVIDIA Corporation <www.nvidia.com> 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #ifndef _TEGRA20_COMMON_H_ 9 #define _TEGRA20_COMMON_H_ 10 #include "tegra-common.h" 11 12 /* Cortex-A9 uses a cache line size of 32 bytes */ 13 #define CONFIG_SYS_CACHELINE_SIZE 32 14 15 /* 16 * Errata configuration 17 */ 18 #define CONFIG_ARM_ERRATA_716044 19 #define CONFIG_ARM_ERRATA_742230 20 #define CONFIG_ARM_ERRATA_751472 21 22 /* 23 * NS16550 Configuration 24 */ 25 #define V_NS16550_CLK 216000000 /* 216MHz (pllp_out0) */ 26 27 /* 28 * Miscellaneous configurable options 29 */ 30 #define CONFIG_STACKBASE 0x02800000 /* 40MB */ 31 32 /*----------------------------------------------------------------------- 33 * Physical Memory Map 34 */ 35 #define CONFIG_SYS_TEXT_BASE 0x00110000 36 37 /* 38 * Memory layout for where various images get loaded by boot scripts: 39 * 40 * scriptaddr can be pretty much anywhere that doesn't conflict with something 41 * else. Put it above BOOTMAPSZ to eliminate conflicts. 42 * 43 * pxefile_addr_r can be pretty much anywhere that doesn't conflict with 44 * something else. Put it above BOOTMAPSZ to eliminate conflicts. 45 * 46 * kernel_addr_r must be within the first 128M of RAM in order for the 47 * kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will 48 * decompress itself to 0x8000 after the start of RAM, kernel_addr_r 49 * should not overlap that area, or the kernel will have to copy itself 50 * somewhere else before decompression. Similarly, the address of any other 51 * data passed to the kernel shouldn't overlap the start of RAM. Pushing 52 * this up to 16M allows for a sizable kernel to be decompressed below the 53 * compressed load address. 54 * 55 * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for 56 * the compressed kernel to be up to 16M too. 57 * 58 * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows 59 * for the FDT/DTB to be up to 1M, which is hopefully plenty. 60 */ 61 #define CONFIG_LOADADDR 0x01000000 62 #define MEM_LAYOUT_ENV_SETTINGS \ 63 "scriptaddr=0x10000000\0" \ 64 "pxefile_addr_r=0x10100000\0" \ 65 "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ 66 "fdt_addr_r=0x02000000\0" \ 67 "ramdisk_addr_r=0x02100000\0" 68 69 /* Defines for SPL */ 70 #define CONFIG_SPL_TEXT_BASE 0x00108000 71 #define CONFIG_SYS_SPL_MALLOC_START 0x00090000 72 #define CONFIG_SPL_STACK 0x000ffffc 73 74 /* Align LCD to 1MB boundary */ 75 #define CONFIG_LCD_ALIGNMENT MMU_SECTION_SIZE 76 77 #ifdef CONFIG_TEGRA_LP0 78 #define TEGRA_LP0_ADDR 0x1C406000 79 #define TEGRA_LP0_SIZE 0x2000 80 #define TEGRA_LP0_VEC \ 81 "lp0_vec=" __stringify(TEGRA_LP0_SIZE) \ 82 "@" __stringify(TEGRA_LP0_ADDR) " " 83 #else 84 #define TEGRA_LP0_VEC 85 #endif 86 87 /* 88 * This parameter affects a TXFILLTUNING field that controls how much data is 89 * sent to the latency fifo before it is sent to the wire. Without this 90 * parameter, the default (2) causes occasional Data Buffer Errors in OUT 91 * packets depending on the buffer address and size. 92 */ 93 #define CONFIG_USB_EHCI_TXFIFO_THRESH 10 94 #define CONFIG_EHCI_IS_TDI 95 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1 96 97 #define CONFIG_SYS_NAND_SELF_INIT 98 #define CONFIG_SYS_NAND_ONFI_DETECTION 99 100 #endif /* _TEGRA20_COMMON_H_ */ 101