1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  *  (C) Copyright 2010-2012
4  *  NVIDIA Corporation <www.nvidia.com>
5  */
6 
7 #ifndef _TEGRA20_COMMON_H_
8 #define _TEGRA20_COMMON_H_
9 #include "tegra-common.h"
10 
11 /*
12  * NS16550 Configuration
13  */
14 #define V_NS16550_CLK		216000000	/* 216MHz (pllp_out0) */
15 
16 /*
17  * Miscellaneous configurable options
18  */
19 #define CONFIG_STACKBASE	0x02800000	/* 40MB */
20 
21 /*-----------------------------------------------------------------------
22  * Physical Memory Map
23  */
24 
25 /*
26  * Memory layout for where various images get loaded by boot scripts:
27  *
28  * scriptaddr can be pretty much anywhere that doesn't conflict with something
29  *   else. Put it above BOOTMAPSZ to eliminate conflicts.
30  *
31  * pxefile_addr_r can be pretty much anywhere that doesn't conflict with
32  *   something else. Put it above BOOTMAPSZ to eliminate conflicts.
33  *
34  * kernel_addr_r must be within the first 128M of RAM in order for the
35  *   kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
36  *   decompress itself to 0x8000 after the start of RAM, kernel_addr_r
37  *   should not overlap that area, or the kernel will have to copy itself
38  *   somewhere else before decompression. Similarly, the address of any other
39  *   data passed to the kernel shouldn't overlap the start of RAM. Pushing
40  *   this up to 16M allows for a sizable kernel to be decompressed below the
41  *   compressed load address.
42  *
43  * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for
44  *   the compressed kernel to be up to 16M too.
45  *
46  * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows
47  *   for the FDT/DTB to be up to 1M, which is hopefully plenty.
48  */
49 #define CONFIG_LOADADDR 0x01000000
50 #define MEM_LAYOUT_ENV_SETTINGS \
51 	"scriptaddr=0x10000000\0" \
52 	"pxefile_addr_r=0x10100000\0" \
53 	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
54 	"fdt_addr_r=0x02000000\0" \
55 	"ramdisk_addr_r=0x02100000\0"
56 
57 /* Defines for SPL */
58 #define CONFIG_SPL_TEXT_BASE		0x00108000
59 #define CONFIG_SYS_SPL_MALLOC_START	0x00090000
60 #define CONFIG_SPL_STACK		0x000ffffc
61 
62 /* Align LCD to 1MB boundary */
63 #define CONFIG_LCD_ALIGNMENT	MMU_SECTION_SIZE
64 
65 #ifdef CONFIG_TEGRA_LP0
66 #define TEGRA_LP0_ADDR			0x1C406000
67 #define TEGRA_LP0_SIZE			0x2000
68 #define TEGRA_LP0_VEC \
69 	"lp0_vec=" __stringify(TEGRA_LP0_SIZE)  \
70 	"@" __stringify(TEGRA_LP0_ADDR) " "
71 #else
72 #define TEGRA_LP0_VEC
73 #endif
74 
75 /*
76  * This parameter affects a TXFILLTUNING field that controls how much data is
77  * sent to the latency fifo before it is sent to the wire. Without this
78  * parameter, the default (2) causes occasional Data Buffer Errors in OUT
79  * packets depending on the buffer address and size.
80  */
81 #define CONFIG_USB_EHCI_TXFIFO_THRESH	10
82 #define CONFIG_EHCI_IS_TDI
83 
84 #define CONFIG_SYS_NAND_SELF_INIT
85 #define CONFIG_SYS_NAND_ONFI_DETECTION
86 
87 #endif /* _TEGRA20_COMMON_H_ */
88