1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /* 3 * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved. 4 */ 5 6 #ifndef _TEGRA114_COMMON_H_ 7 #define _TEGRA114_COMMON_H_ 8 #include "tegra-common.h" 9 10 /* 11 * NS16550 Configuration 12 */ 13 #define V_NS16550_CLK 408000000 /* 408MHz (pllp_out0) */ 14 15 /* 16 * Miscellaneous configurable options 17 */ 18 #define CONFIG_STACKBASE 0x82800000 /* 40MB */ 19 20 /*----------------------------------------------------------------------- 21 * Physical Memory Map 22 */ 23 24 /* 25 * Memory layout for where various images get loaded by boot scripts: 26 * 27 * scriptaddr can be pretty much anywhere that doesn't conflict with something 28 * else. Put it above BOOTMAPSZ to eliminate conflicts. 29 * 30 * pxefile_addr_r can be pretty much anywhere that doesn't conflict with 31 * something else. Put it above BOOTMAPSZ to eliminate conflicts. 32 * 33 * kernel_addr_r must be within the first 128M of RAM in order for the 34 * kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will 35 * decompress itself to 0x8000 after the start of RAM, kernel_addr_r 36 * should not overlap that area, or the kernel will have to copy itself 37 * somewhere else before decompression. Similarly, the address of any other 38 * data passed to the kernel shouldn't overlap the start of RAM. Pushing 39 * this up to 16M allows for a sizable kernel to be decompressed below the 40 * compressed load address. 41 * 42 * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for 43 * the compressed kernel to be up to 16M too. 44 * 45 * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows 46 * for the FDT/DTB to be up to 1M, which is hopefully plenty. 47 */ 48 #define CONFIG_LOADADDR 0x81000000 49 #define MEM_LAYOUT_ENV_SETTINGS \ 50 "scriptaddr=0x90000000\0" \ 51 "pxefile_addr_r=0x90100000\0" \ 52 "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ 53 "fdt_addr_r=0x82000000\0" \ 54 "ramdisk_addr_r=0x82100000\0" 55 56 /* Defines for SPL */ 57 #define CONFIG_SPL_TEXT_BASE 0x80108000 58 #define CONFIG_SYS_SPL_MALLOC_START 0x80090000 59 #define CONFIG_SPL_STACK 0x800ffffc 60 61 /* For USB EHCI controller */ 62 #define CONFIG_EHCI_IS_TDI 63 #define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10 64 65 #endif /* _TEGRA114_COMMON_H_ */ 66