1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * Copyright (c) 2010-2013, NVIDIA CORPORATION.  All rights reserved.
4  */
5 
6 #ifndef _TEGRA114_COMMON_H_
7 #define _TEGRA114_COMMON_H_
8 #include "tegra-common.h"
9 
10 /*
11  * NS16550 Configuration
12  */
13 #define V_NS16550_CLK		408000000	/* 408MHz (pllp_out0) */
14 
15 /*
16  * Miscellaneous configurable options
17  */
18 #define CONFIG_STACKBASE	0x82800000	/* 40MB */
19 
20 /*-----------------------------------------------------------------------
21  * Physical Memory Map
22  */
23 
24 /*
25  * Memory layout for where various images get loaded by boot scripts:
26  *
27  * scriptaddr can be pretty much anywhere that doesn't conflict with something
28  *   else. Put it above BOOTMAPSZ to eliminate conflicts.
29  *
30  * pxefile_addr_r can be pretty much anywhere that doesn't conflict with
31  *   something else. Put it above BOOTMAPSZ to eliminate conflicts.
32  *
33  * kernel_addr_r must be within the first 128M of RAM in order for the
34  *   kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
35  *   decompress itself to 0x8000 after the start of RAM, kernel_addr_r
36  *   should not overlap that area, or the kernel will have to copy itself
37  *   somewhere else before decompression. Similarly, the address of any other
38  *   data passed to the kernel shouldn't overlap the start of RAM. Pushing
39  *   this up to 16M allows for a sizable kernel to be decompressed below the
40  *   compressed load address.
41  *
42  * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for
43  *   the compressed kernel to be up to 16M too.
44  *
45  * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows
46  *   for the FDT/DTB to be up to 1M, which is hopefully plenty.
47  */
48 #define CONFIG_LOADADDR 0x81000000
49 #define MEM_LAYOUT_ENV_SETTINGS \
50 	"scriptaddr=0x90000000\0" \
51 	"pxefile_addr_r=0x90100000\0" \
52 	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
53 	"fdt_addr_r=0x82000000\0" \
54 	"ramdisk_addr_r=0x82100000\0"
55 
56 /* Defines for SPL */
57 #define CONFIG_SPL_TEXT_BASE		0x80108000
58 #define CONFIG_SYS_SPL_MALLOC_START	0x80090000
59 #define CONFIG_SPL_STACK		0x800ffffc
60 
61 /* For USB EHCI controller */
62 #define CONFIG_EHCI_IS_TDI
63 #define CONFIG_USB_EHCI_TXFIFO_THRESH	0x10
64 
65 #endif /* _TEGRA114_COMMON_H_ */
66