1 /* 2 * Copyright (C) 2011-2014 Pierrick Hascoet, Abilis Systems 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef _CONFIG_TB100_H_ 8 #define _CONFIG_TB100_H_ 9 10 #include <linux/sizes.h> 11 12 /* 13 * CPU configuration 14 */ 15 #define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ 16 17 /* 18 * Memory configuration 19 */ 20 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 21 22 #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 23 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 24 #define CONFIG_SYS_SDRAM_SIZE SZ_128M 25 26 #define CONFIG_SYS_INIT_SP_ADDR \ 27 (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) 28 29 #define CONFIG_SYS_MALLOC_LEN SZ_128K 30 #define CONFIG_SYS_BOOTM_LEN SZ_32M 31 #define CONFIG_SYS_LOAD_ADDR 0x82000000 32 33 #define CONFIG_SYS_NO_FLASH 34 35 /* 36 * UART configuration 37 */ 38 #define CONFIG_DW_SERIAL 39 #define CONFIG_SYS_NS16550 40 #define CONFIG_SYS_NS16550_SERIAL 41 #define CONFIG_SYS_NS16550_CLK 166666666 42 #define CONFIG_BAUDRATE 115200 43 44 /* 45 * Ethernet PHY configuration 46 */ 47 #define CONFIG_PHYLIB 48 #define CONFIG_PHY_GIGE 49 50 /* 51 * Even though the board houses Realtek RTL8211E PHY 52 * corresponding PHY driver (drivers/net/phy/realtek.c) behaves unexpectedly. 53 * In particular "parse_status" reports link is down. 54 * 55 * Until Realtek PHY driver is fixed fall back to generic PHY driver 56 * which implements all required functionality and behaves much more stable. 57 * 58 * #define CONFIG_PHY_REALTEK 59 * 60 */ 61 62 /* 63 * Ethernet configuration 64 */ 65 #define ETH0_BASE_ADDRESS 0xFE100000 66 #define ETH1_BASE_ADDRESS 0xFE110000 67 68 /* 69 * Command line configuration 70 */ 71 #include <config_cmd_default.h> 72 73 #define CONFIG_CMD_DHCP 74 #define CONFIG_CMD_ELF 75 #define CONFIG_CMD_PING 76 77 #define CONFIG_OF_LIBFDT 78 79 #define CONFIG_AUTO_COMPLETE 80 #define CONFIG_SYS_MAXARGS 16 81 82 /* 83 * Environment settings 84 */ 85 #define CONFIG_ENV_IS_NOWHERE 86 #define CONFIG_ENV_SIZE SZ_2K 87 #define CONFIG_ENV_OFFSET 0 88 89 /* 90 * Environment configuration 91 */ 92 #define CONFIG_BOOTDELAY 3 93 #define CONFIG_BOOTFILE "uImage" 94 #define CONFIG_BOOTARGS "console=ttyS0,115200n8" 95 #define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR 96 97 /* 98 * Console configuration 99 */ 100 #define CONFIG_SYS_LONGHELP 101 #define CONFIG_SYS_PROMPT "[tb100]:~# " 102 #define CONFIG_SYS_CBSIZE 256 103 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 104 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 105 sizeof(CONFIG_SYS_PROMPT) + 16) 106 107 #endif /* _CONFIG_TB100_H_ */ 108