1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright (C) 2011-2014 Pierrick Hascoet, Abilis Systems 4 */ 5 6 #ifndef _CONFIG_TB100_H_ 7 #define _CONFIG_TB100_H_ 8 9 #include <linux/sizes.h> 10 11 /* 12 * Memory configuration 13 */ 14 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 15 16 #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 17 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 18 #define CONFIG_SYS_SDRAM_SIZE SZ_128M 19 20 #define CONFIG_SYS_INIT_SP_ADDR \ 21 (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) 22 23 #define CONFIG_SYS_MALLOC_LEN SZ_128K 24 #define CONFIG_SYS_BOOTM_LEN SZ_32M 25 #define CONFIG_SYS_LOAD_ADDR 0x82000000 26 27 /* 28 * UART configuration 29 */ 30 #define CONFIG_SYS_NS16550_SERIAL 31 #define CONFIG_SYS_NS16550_CLK 166666666 32 33 /* 34 * Even though the board houses Realtek RTL8211E PHY 35 * corresponding PHY driver (drivers/net/phy/realtek.c) behaves unexpectedly. 36 * In particular "parse_status" reports link is down. 37 * 38 * Until Realtek PHY driver is fixed fall back to generic PHY driver 39 * which implements all required functionality and behaves much more stable. 40 * 41 * #define CONFIG_PHY_REALTEK 42 * 43 */ 44 45 /* 46 * Ethernet configuration 47 */ 48 #define ETH0_BASE_ADDRESS 0xFE100000 49 #define ETH1_BASE_ADDRESS 0xFE110000 50 51 /* 52 * Command line configuration 53 */ 54 55 /* 56 * Environment settings 57 */ 58 #define CONFIG_ENV_SIZE SZ_2K 59 #define CONFIG_ENV_OFFSET 0 60 61 /* 62 * Environment configuration 63 */ 64 #define CONFIG_BOOTFILE "uImage" 65 #define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR 66 67 /* 68 * Console configuration 69 */ 70 71 #endif /* _CONFIG_TB100_H_ */ 72