xref: /openbmc/u-boot/include/configs/tb100.h (revision 473af36a)
1 /*
2  * Copyright (C) 2011-2014 Pierrick Hascoet, Abilis Systems
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #ifndef _CONFIG_TB100_H_
8 #define _CONFIG_TB100_H_
9 
10 #include <linux/sizes.h>
11 
12 /*
13  *  CPU configuration
14  */
15 #define CONFIG_SYS_TIMER_RATE		CONFIG_SYS_CLK_FREQ
16 
17 /*
18  * Memory configuration
19  */
20 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
21 
22 #define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000
23 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
24 #define CONFIG_SYS_SDRAM_SIZE		SZ_128M
25 
26 #define CONFIG_SYS_INIT_SP_ADDR		\
27 	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
28 
29 #define CONFIG_SYS_MALLOC_LEN		SZ_128K
30 #define CONFIG_SYS_BOOTM_LEN		SZ_32M
31 #define CONFIG_SYS_LOAD_ADDR		0x82000000
32 
33 #define CONFIG_SYS_NO_FLASH
34 
35 /*
36  * UART configuration
37  */
38 #define CONFIG_SYS_NS16550_SERIAL
39 #define CONFIG_SYS_NS16550_CLK		166666666
40 #define CONFIG_BAUDRATE			115200
41 
42 /*
43  * Ethernet PHY configuration
44  */
45 #define CONFIG_PHY_GIGE
46 
47 /*
48  * Even though the board houses Realtek RTL8211E PHY
49  * corresponding PHY driver (drivers/net/phy/realtek.c) behaves unexpectedly.
50  * In particular "parse_status" reports link is down.
51  *
52  * Until Realtek PHY driver is fixed fall back to generic PHY driver
53  * which implements all required functionality and behaves much more stable.
54  *
55  * #define CONFIG_PHY_REALTEK
56  *
57  */
58 
59 /*
60  * Ethernet configuration
61  */
62 #define ETH0_BASE_ADDRESS		0xFE100000
63 #define ETH1_BASE_ADDRESS		0xFE110000
64 
65 /*
66  * Command line configuration
67  */
68 
69 #define CONFIG_AUTO_COMPLETE
70 #define CONFIG_SYS_MAXARGS		16
71 
72 /*
73  * Environment settings
74  */
75 #define CONFIG_ENV_IS_NOWHERE
76 #define CONFIG_ENV_SIZE			SZ_2K
77 #define CONFIG_ENV_OFFSET		0
78 
79 /*
80  * Environment configuration
81  */
82 #define CONFIG_BOOTFILE			"uImage"
83 #define CONFIG_BOOTARGS			"console=ttyS0,115200n8"
84 #define CONFIG_LOADADDR			CONFIG_SYS_LOAD_ADDR
85 
86 /*
87  * Console configuration
88  */
89 #define CONFIG_SYS_LONGHELP
90 #define CONFIG_SYS_CBSIZE		256
91 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
92 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
93 						sizeof(CONFIG_SYS_PROMPT) + 16)
94 
95 #endif /* _CONFIG_TB100_H_ */
96