1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Common board functions for Siemens TAURUS (AT91SAM9G20) based boards 4 * (C) Copyright 2013 Siemens AG 5 * 6 * Based on: 7 * U-Boot file: include/configs/at91sam9260ek.h 8 * 9 * (C) Copyright 2007-2008 10 * Stelian Pop <stelian@popies.net> 11 * Lead Tech Design <www.leadtechdesign.com> 12 */ 13 14 #ifndef __CONFIG_H 15 #define __CONFIG_H 16 17 /* 18 * SoC must be defined first, before hardware.h is included. 19 * In this case SoC is defined in boards.cfg. 20 */ 21 #include <asm/hardware.h> 22 #include <linux/sizes.h> 23 24 #if defined(CONFIG_SPL_BUILD) 25 #define CONFIG_SYS_ICACHE_OFF 26 #define CONFIG_SYS_DCACHE_OFF 27 #endif 28 /* 29 * Warning: changing CONFIG_SYS_TEXT_BASE requires 30 * adapting the initial boot program. 31 * Since the linker has to swallow that define, we must use a pure 32 * hex number here! 33 */ 34 35 /* ARM asynchronous clock */ 36 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ 37 #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* main clock xtal */ 38 39 /* Misc CPU related */ 40 #define CONFIG_ARCH_CPU_INIT 41 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 42 #define CONFIG_SETUP_MEMORY_TAGS 43 #define CONFIG_INITRD_TAG 44 #define CONFIG_SKIP_LOWLEVEL_INIT_ONLY 45 46 /* general purpose I/O */ 47 #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ 48 #define CONFIG_AT91_GPIO 49 #define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */ 50 51 /* serial console */ 52 #define CONFIG_ATMEL_USART 53 #define CONFIG_USART_BASE ATMEL_BASE_DBGU 54 #define CONFIG_USART_ID ATMEL_ID_SYS 55 56 57 /* 58 * SDRAM: 1 bank, min 32, max 128 MB 59 * Initialized before u-boot gets started. 60 */ 61 #define CONFIG_NR_DRAM_BANKS 1 62 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 63 #define CONFIG_SYS_SDRAM_SIZE (128 * SZ_1M) 64 65 /* 66 * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM, 67 * leaving the correct space for initial global data structure above 68 * that address while providing maximum stack area below. 69 */ 70 #define CONFIG_SYS_INIT_SP_ADDR \ 71 (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE) 72 73 /* NAND flash */ 74 #ifdef CONFIG_CMD_NAND 75 #define CONFIG_NAND_ATMEL 76 #define CONFIG_SYS_MAX_NAND_DEVICE 1 77 #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 78 #define CONFIG_SYS_NAND_DBW_8 79 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) 80 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) 81 #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 82 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 83 #endif 84 85 /* Ethernet */ 86 #define CONFIG_MACB 87 #define CONFIG_RMII 88 #define CONFIG_AT91_WANTS_COMMON_PHY 89 90 #define CONFIG_AT91SAM9_WATCHDOG 91 #define CONFIG_AT91_HW_WDT_TIMEOUT 15 92 #if !defined(CONFIG_SPL_BUILD) 93 /* Enable the watchdog */ 94 #define CONFIG_HW_WATCHDOG 95 #endif 96 97 /* USB */ 98 #if defined(CONFIG_BOARD_TAURUS) 99 #define CONFIG_USB_ATMEL 100 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB 101 #define CONFIG_USB_OHCI_NEW 102 #define CONFIG_SYS_USB_OHCI_CPU_INIT 103 #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 104 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" 105 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 106 107 /* USB DFU support */ 108 #define CONFIG_MTD_DEVICE 109 #define CONFIG_MTD_PARTITIONS 110 111 #define CONFIG_USB_GADGET_AT91 112 113 /* DFU class support */ 114 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (SZ_1M) 115 #define DFU_MANIFEST_POLL_TIMEOUT 25000 116 #endif 117 118 /* SPI EEPROM */ 119 #define TAURUS_SPI_MASK (1 << 4) 120 #define TAURUS_SPI_CS_PIN AT91_PIN_PA3 121 122 #if defined(CONFIG_SPL_BUILD) 123 /* SPL related */ 124 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 125 126 #define CONFIG_SF_DEFAULT_BUS 0 127 #define CONFIG_SF_DEFAULT_SPEED 1000000 128 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 129 #endif 130 131 /* load address */ 132 #define CONFIG_SYS_LOAD_ADDR 0x22000000 133 134 /* bootstrap in spi flash , u-boot + env + linux in nandflash */ 135 #define CONFIG_ENV_OFFSET 0x100000 136 #define CONFIG_ENV_OFFSET_REDUND 0x180000 137 #define CONFIG_ENV_SIZE (SZ_128K) /* 1 sector = 128 kB */ 138 #define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm" 139 140 /* 141 * Size of malloc() pool 142 */ 143 #define CONFIG_SYS_MALLOC_LEN \ 144 ROUND(3 * CONFIG_ENV_SIZE + SZ_4M, 0x1000) 145 146 /* Defines for SPL */ 147 #define CONFIG_SPL_TEXT_BASE 0x0 148 #define CONFIG_SPL_MAX_SIZE (31 * SZ_512) 149 #define CONFIG_SPL_STACK (ATMEL_BASE_SRAM1 + SZ_16K) 150 #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \ 151 CONFIG_SYS_MALLOC_LEN) 152 #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN 153 154 #define CONFIG_SPL_BSS_START_ADDR CONFIG_SPL_MAX_SIZE 155 #define CONFIG_SPL_BSS_MAX_SIZE (3 * SZ_512) 156 157 #define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14) 158 #define CONFIG_SYS_USE_NANDFLASH 1 159 #define CONFIG_SPL_NAND_DRIVERS 160 #define CONFIG_SPL_NAND_BASE 161 #define CONFIG_SPL_NAND_ECC 162 #define CONFIG_SPL_NAND_RAW_ONLY 163 #define CONFIG_SPL_NAND_SOFTECC 164 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000 165 #define CONFIG_SYS_NAND_U_BOOT_SIZE SZ_512K 166 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 167 #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE 168 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 169 170 #define CONFIG_SYS_NAND_SIZE (256 * SZ_1M) 171 #define CONFIG_SYS_NAND_PAGE_SIZE SZ_2K 172 #define CONFIG_SYS_NAND_BLOCK_SIZE (SZ_128K) 173 #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ 174 CONFIG_SYS_NAND_PAGE_SIZE) 175 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 176 #define CONFIG_SYS_NAND_ECCSIZE 256 177 #define CONFIG_SYS_NAND_ECCBYTES 3 178 #define CONFIG_SYS_NAND_OOBSIZE 64 179 #define CONFIG_SYS_NAND_ECCPOS { 40, 41, 42, 43, 44, 45, 46, 47, \ 180 48, 49, 50, 51, 52, 53, 54, 55, \ 181 56, 57, 58, 59, 60, 61, 62, 63, } 182 183 #define CONFIG_SPL_ATMEL_SIZE 184 #define CONFIG_SYS_MASTER_CLOCK 132096000 185 #define AT91_PLL_LOCK_TIMEOUT 1000000 186 #define CONFIG_SYS_AT91_PLLA 0x202A3F01 187 #define CONFIG_SYS_MCKR 0x1300 188 #define CONFIG_SYS_MCKR_CSS (0x02 | CONFIG_SYS_MCKR) 189 #define CONFIG_SYS_AT91_PLLB 0x10193F05 190 191 #endif 192