1 /* 2 * Common board functions for Siemens TAURUS (AT91SAM9G20) based boards 3 * (C) Copyright 2013 Siemens AG 4 * 5 * Based on: 6 * U-Boot file: include/configs/at91sam9260ek.h 7 * 8 * (C) Copyright 2007-2008 9 * Stelian Pop <stelian@popies.net> 10 * Lead Tech Design <www.leadtechdesign.com> 11 * 12 * SPDX-License-Identifier: GPL-2.0+ 13 */ 14 15 #ifndef __CONFIG_H 16 #define __CONFIG_H 17 18 /* 19 * SoC must be defined first, before hardware.h is included. 20 * In this case SoC is defined in boards.cfg. 21 */ 22 #include <asm/hardware.h> 23 #include <linux/sizes.h> 24 25 #if defined(CONFIG_SPL_BUILD) 26 #define CONFIG_SYS_ICACHE_OFF 27 #define CONFIG_SYS_DCACHE_OFF 28 #endif 29 /* 30 * Warning: changing CONFIG_SYS_TEXT_BASE requires 31 * adapting the initial boot program. 32 * Since the linker has to swallow that define, we must use a pure 33 * hex number here! 34 */ 35 36 /* ARM asynchronous clock */ 37 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ 38 #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* main clock xtal */ 39 40 /* Misc CPU related */ 41 #define CONFIG_ARCH_CPU_INIT 42 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 43 #define CONFIG_SETUP_MEMORY_TAGS 44 #define CONFIG_INITRD_TAG 45 #define CONFIG_SKIP_LOWLEVEL_INIT_ONLY 46 47 /* general purpose I/O */ 48 #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ 49 #define CONFIG_AT91_GPIO 50 #define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */ 51 52 /* serial console */ 53 #define CONFIG_ATMEL_USART 54 #define CONFIG_USART_BASE ATMEL_BASE_DBGU 55 #define CONFIG_USART_ID ATMEL_ID_SYS 56 57 58 /* 59 * SDRAM: 1 bank, min 32, max 128 MB 60 * Initialized before u-boot gets started. 61 */ 62 #define CONFIG_NR_DRAM_BANKS 1 63 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 64 #define CONFIG_SYS_SDRAM_SIZE (128 * SZ_1M) 65 66 /* 67 * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM, 68 * leaving the correct space for initial global data structure above 69 * that address while providing maximum stack area below. 70 */ 71 #define CONFIG_SYS_INIT_SP_ADDR \ 72 (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE) 73 74 /* NAND flash */ 75 #ifdef CONFIG_CMD_NAND 76 #define CONFIG_NAND_ATMEL 77 #define CONFIG_SYS_MAX_NAND_DEVICE 1 78 #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 79 #define CONFIG_SYS_NAND_DBW_8 80 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) 81 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) 82 #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 83 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 84 #endif 85 86 /* Ethernet */ 87 #define CONFIG_MACB 88 #define CONFIG_RMII 89 #define CONFIG_AT91_WANTS_COMMON_PHY 90 91 #define CONFIG_AT91SAM9_WATCHDOG 92 #define CONFIG_AT91_HW_WDT_TIMEOUT 15 93 #if !defined(CONFIG_SPL_BUILD) 94 /* Enable the watchdog */ 95 #define CONFIG_HW_WATCHDOG 96 #endif 97 98 /* USB */ 99 #if defined(CONFIG_BOARD_TAURUS) 100 #define CONFIG_USB_ATMEL 101 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB 102 #define CONFIG_USB_OHCI_NEW 103 #define CONFIG_SYS_USB_OHCI_CPU_INIT 104 #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 105 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" 106 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 107 108 /* USB DFU support */ 109 #define CONFIG_MTD_DEVICE 110 #define CONFIG_MTD_PARTITIONS 111 112 #define CONFIG_USB_GADGET_AT91 113 114 /* DFU class support */ 115 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (SZ_1M) 116 #define DFU_MANIFEST_POLL_TIMEOUT 25000 117 #endif 118 119 /* SPI EEPROM */ 120 #define CONFIG_SPI 121 #define CONFIG_ATMEL_SPI 122 #define TAURUS_SPI_MASK (1 << 4) 123 #define TAURUS_SPI_CS_PIN AT91_PIN_PA3 124 125 #if defined(CONFIG_SPL_BUILD) 126 /* SPL related */ 127 #define CONFIG_SPL_SPI_LOAD 128 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 129 130 #define CONFIG_SF_DEFAULT_BUS 0 131 #define CONFIG_SF_DEFAULT_SPEED 1000000 132 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 133 #endif 134 135 /* load address */ 136 #define CONFIG_SYS_LOAD_ADDR 0x22000000 137 138 /* bootstrap in spi flash , u-boot + env + linux in nandflash */ 139 #define CONFIG_ENV_OFFSET 0x100000 140 #define CONFIG_ENV_OFFSET_REDUND 0x180000 141 #define CONFIG_ENV_SIZE (SZ_128K) /* 1 sector = 128 kB */ 142 #define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm" 143 144 /* 145 * Size of malloc() pool 146 */ 147 #define CONFIG_SYS_MALLOC_LEN \ 148 ROUND(3 * CONFIG_ENV_SIZE + SZ_4M, 0x1000) 149 150 /* Defines for SPL */ 151 #define CONFIG_SPL_TEXT_BASE 0x0 152 #define CONFIG_SPL_MAX_SIZE (31 * SZ_512) 153 #define CONFIG_SPL_STACK (ATMEL_BASE_SRAM1 + SZ_16K) 154 #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \ 155 CONFIG_SYS_MALLOC_LEN) 156 #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN 157 158 #define CONFIG_SPL_BSS_START_ADDR CONFIG_SPL_MAX_SIZE 159 #define CONFIG_SPL_BSS_MAX_SIZE (3 * SZ_512) 160 161 #define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14) 162 #define CONFIG_SYS_USE_NANDFLASH 1 163 #define CONFIG_SPL_NAND_DRIVERS 164 #define CONFIG_SPL_NAND_BASE 165 #define CONFIG_SPL_NAND_ECC 166 #define CONFIG_SPL_NAND_RAW_ONLY 167 #define CONFIG_SPL_NAND_SOFTECC 168 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000 169 #define CONFIG_SYS_NAND_U_BOOT_SIZE SZ_512K 170 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 171 #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE 172 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 173 174 #define CONFIG_SYS_NAND_SIZE (256 * SZ_1M) 175 #define CONFIG_SYS_NAND_PAGE_SIZE SZ_2K 176 #define CONFIG_SYS_NAND_BLOCK_SIZE (SZ_128K) 177 #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ 178 CONFIG_SYS_NAND_PAGE_SIZE) 179 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 180 #define CONFIG_SYS_NAND_ECCSIZE 256 181 #define CONFIG_SYS_NAND_ECCBYTES 3 182 #define CONFIG_SYS_NAND_OOBSIZE 64 183 #define CONFIG_SYS_NAND_ECCPOS { 40, 41, 42, 43, 44, 45, 46, 47, \ 184 48, 49, 50, 51, 52, 53, 54, 55, \ 185 56, 57, 58, 59, 60, 61, 62, 63, } 186 187 #define CONFIG_SPL_ATMEL_SIZE 188 #define CONFIG_SYS_MASTER_CLOCK 132096000 189 #define AT91_PLL_LOCK_TIMEOUT 1000000 190 #define CONFIG_SYS_AT91_PLLA 0x202A3F01 191 #define CONFIG_SYS_MCKR 0x1300 192 #define CONFIG_SYS_MCKR_CSS (0x02 | CONFIG_SYS_MCKR) 193 #define CONFIG_SYS_AT91_PLLB 0x10193F05 194 195 #endif 196