1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Common board functions for Siemens TAURUS (AT91SAM9G20) based boards 4 * (C) Copyright 2013 Siemens AG 5 * 6 * Based on: 7 * U-Boot file: include/configs/at91sam9260ek.h 8 * 9 * (C) Copyright 2007-2008 10 * Stelian Pop <stelian@popies.net> 11 * Lead Tech Design <www.leadtechdesign.com> 12 */ 13 14 #ifndef __CONFIG_H 15 #define __CONFIG_H 16 17 /* 18 * SoC must be defined first, before hardware.h is included. 19 * In this case SoC is defined in boards.cfg. 20 */ 21 #include <asm/hardware.h> 22 #include <linux/sizes.h> 23 24 #if defined(CONFIG_SPL_BUILD) 25 #define CONFIG_SYS_ICACHE_OFF 26 #define CONFIG_SYS_DCACHE_OFF 27 #endif 28 /* 29 * Warning: changing CONFIG_SYS_TEXT_BASE requires 30 * adapting the initial boot program. 31 * Since the linker has to swallow that define, we must use a pure 32 * hex number here! 33 */ 34 35 /* ARM asynchronous clock */ 36 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ 37 #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* main clock xtal */ 38 39 /* Misc CPU related */ 40 #define CONFIG_ARCH_CPU_INIT 41 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 42 #define CONFIG_SETUP_MEMORY_TAGS 43 #define CONFIG_INITRD_TAG 44 #define CONFIG_SKIP_LOWLEVEL_INIT_ONLY 45 46 /* general purpose I/O */ 47 #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ 48 #define CONFIG_AT91_GPIO 49 #define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */ 50 51 /* serial console */ 52 #define CONFIG_ATMEL_USART 53 #define CONFIG_USART_BASE ATMEL_BASE_DBGU 54 #define CONFIG_USART_ID ATMEL_ID_SYS 55 56 57 /* 58 * SDRAM: 1 bank, min 32, max 128 MB 59 * Initialized before u-boot gets started. 60 */ 61 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 62 #define CONFIG_SYS_SDRAM_SIZE (128 * SZ_1M) 63 64 /* 65 * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM, 66 * leaving the correct space for initial global data structure above 67 * that address while providing maximum stack area below. 68 */ 69 #define CONFIG_SYS_INIT_SP_ADDR \ 70 (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE) 71 72 /* NAND flash */ 73 #ifdef CONFIG_CMD_NAND 74 #define CONFIG_SYS_MAX_NAND_DEVICE 1 75 #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 76 #define CONFIG_SYS_NAND_DBW_8 77 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) 78 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) 79 #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 80 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 81 #endif 82 83 /* Ethernet */ 84 #define CONFIG_MACB 85 #define CONFIG_RMII 86 #define CONFIG_AT91_WANTS_COMMON_PHY 87 88 #define CONFIG_AT91SAM9_WATCHDOG 89 #define CONFIG_AT91_HW_WDT_TIMEOUT 15 90 #if !defined(CONFIG_SPL_BUILD) 91 /* Enable the watchdog */ 92 #define CONFIG_HW_WATCHDOG 93 #endif 94 95 /* USB */ 96 #if defined(CONFIG_BOARD_TAURUS) 97 #define CONFIG_USB_ATMEL 98 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB 99 #define CONFIG_USB_OHCI_NEW 100 #define CONFIG_SYS_USB_OHCI_CPU_INIT 101 #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 102 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" 103 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 104 105 /* USB DFU support */ 106 107 #define CONFIG_USB_GADGET_AT91 108 109 /* DFU class support */ 110 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (SZ_1M) 111 #define DFU_MANIFEST_POLL_TIMEOUT 25000 112 #endif 113 114 /* SPI EEPROM */ 115 #define TAURUS_SPI_MASK (1 << 4) 116 #define TAURUS_SPI_CS_PIN AT91_PIN_PA3 117 118 #if defined(CONFIG_SPL_BUILD) 119 /* SPL related */ 120 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 121 122 #define CONFIG_SF_DEFAULT_BUS 0 123 #define CONFIG_SF_DEFAULT_SPEED 1000000 124 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 125 #endif 126 127 /* load address */ 128 #define CONFIG_SYS_LOAD_ADDR 0x22000000 129 130 /* bootstrap in spi flash , u-boot + env + linux in nandflash */ 131 #define CONFIG_ENV_OFFSET 0x100000 132 #define CONFIG_ENV_OFFSET_REDUND 0x180000 133 #define CONFIG_ENV_SIZE (SZ_128K) /* 1 sector = 128 kB */ 134 #define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm" 135 136 /* 137 * Size of malloc() pool 138 */ 139 #define CONFIG_SYS_MALLOC_LEN \ 140 ROUND(3 * CONFIG_ENV_SIZE + SZ_4M, 0x1000) 141 142 /* Defines for SPL */ 143 #define CONFIG_SPL_TEXT_BASE 0x0 144 #define CONFIG_SPL_MAX_SIZE (31 * SZ_512) 145 #define CONFIG_SPL_STACK (ATMEL_BASE_SRAM1 + SZ_16K) 146 #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \ 147 CONFIG_SYS_MALLOC_LEN) 148 #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN 149 150 #define CONFIG_SPL_BSS_START_ADDR CONFIG_SPL_MAX_SIZE 151 #define CONFIG_SPL_BSS_MAX_SIZE (3 * SZ_512) 152 153 #define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14) 154 #define CONFIG_SYS_USE_NANDFLASH 1 155 #define CONFIG_SPL_NAND_DRIVERS 156 #define CONFIG_SPL_NAND_BASE 157 #define CONFIG_SPL_NAND_ECC 158 #define CONFIG_SPL_NAND_RAW_ONLY 159 #define CONFIG_SPL_NAND_SOFTECC 160 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000 161 #define CONFIG_SYS_NAND_U_BOOT_SIZE SZ_512K 162 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 163 #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE 164 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 165 166 #define CONFIG_SYS_NAND_SIZE (256 * SZ_1M) 167 #define CONFIG_SYS_NAND_PAGE_SIZE SZ_2K 168 #define CONFIG_SYS_NAND_BLOCK_SIZE (SZ_128K) 169 #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ 170 CONFIG_SYS_NAND_PAGE_SIZE) 171 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 172 #define CONFIG_SYS_NAND_ECCSIZE 256 173 #define CONFIG_SYS_NAND_ECCBYTES 3 174 #define CONFIG_SYS_NAND_OOBSIZE 64 175 #define CONFIG_SYS_NAND_ECCPOS { 40, 41, 42, 43, 44, 45, 46, 47, \ 176 48, 49, 50, 51, 52, 53, 54, 55, \ 177 56, 57, 58, 59, 60, 61, 62, 63, } 178 179 #define CONFIG_SPL_ATMEL_SIZE 180 #define CONFIG_SYS_MASTER_CLOCK 132096000 181 #define AT91_PLL_LOCK_TIMEOUT 1000000 182 #define CONFIG_SYS_AT91_PLLA 0x202A3F01 183 #define CONFIG_SYS_MCKR 0x1300 184 #define CONFIG_SYS_MCKR_CSS (0x02 | CONFIG_SYS_MCKR) 185 #define CONFIG_SYS_AT91_PLLB 0x10193F05 186 187 #endif 188