1 /* 2 * Configuration settings for the TechNexion TAO-3530 SOM 3 * equipped on Thunder baseboard. 4 * 5 * Edward Lin <linuxfae@technexion.com> 6 * Tapani Utriainen <linuxfae@technexion.com> 7 * 8 * Copyright (C) 2013 Stefan Roese <sr@denx.de> 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 #ifndef __CONFIG_H 14 #define __CONFIG_H 15 16 /* 17 * High Level Configuration Options 18 */ 19 20 #include <asm/arch/cpu.h> /* get chip and board defs */ 21 #include <asm/arch/omap.h> 22 23 /* Clock Defines */ 24 #define V_OSCK 26000000 /* Clock output from T2 */ 25 #define V_SCLK (V_OSCK >> 1) 26 27 #define CONFIG_MISC_INIT_R 28 29 #define CONFIG_CMDLINE_TAG 30 #define CONFIG_SETUP_MEMORY_TAGS 31 #define CONFIG_INITRD_TAG 32 #define CONFIG_REVISION_TAG 33 34 /* 35 * Size of malloc() pool 36 */ 37 #define CONFIG_SYS_MALLOC_LEN (4 << 20) 38 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB sector */ 39 40 /* 41 * Hardware drivers 42 */ 43 44 /* 45 * NS16550 Configuration 46 */ 47 #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ 48 49 #define CONFIG_SYS_NS16550_SERIAL 50 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 51 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK 52 53 /* 54 * select serial console configuration 55 */ 56 #define CONFIG_CONS_INDEX 3 57 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 58 59 /* allow to overwrite serial and ethaddr */ 60 #define CONFIG_ENV_OVERWRITE 61 62 /* commands to include */ 63 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 64 65 #define CONFIG_SYS_I2C 66 #define CONFIG_SYS_OMAP24_I2C_SPEED 100000 67 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 68 #define CONFIG_I2C_MULTI_BUS 69 70 /* 71 * TWL4030 72 */ 73 #define CONFIG_TWL4030_LED 74 75 /* 76 * Board NAND Info. 77 */ 78 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ 79 /* to access nand */ 80 #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ 81 /* to access nand at */ 82 /* CS0 */ 83 84 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ 85 /* devices */ 86 /* Environment information */ 87 88 #define CONFIG_EXTRA_ENV_SETTINGS \ 89 "loadaddr=0x82000000\0" \ 90 "console=ttyO2,115200n8\0" \ 91 "mpurate=600\0" \ 92 "dvi_mode=omapfb.mode=dvi:1280x720-24@60\0" \ 93 "tv_mode=omapfb.mode=tv:ntsc\0" \ 94 "video_mode=omapdss.def_disp=lcd vram=6M omapfb.vram=0:2M,1:2M,2:2M\0" \ 95 "lcd_mode=omapfb.mode=lcd:800x480@60 \0" \ 96 "extra_options= \0" \ 97 "mmcdev=0\0" \ 98 "mmcroot=/dev/mmcblk0p2 rw\0" \ 99 "mmcrootfstype=ext3 rootwait\0" \ 100 "nandroot=ubi0:rootfs ubi.mtd=4\0" \ 101 "nandrootfstype=ubifs\0" \ 102 "mmcargs=setenv bootargs console=${console} " \ 103 "mpurate=${mpurate} " \ 104 "${video_mode} " \ 105 "root=${mmcroot} " \ 106 "rootfstype=${mmcrootfstype} " \ 107 "${extra_options}\0" \ 108 "nandargs=setenv bootargs console=${console} " \ 109 "mpurate=${mpurate} " \ 110 "${video_mode} " \ 111 "${network_setting} " \ 112 "root=${nandroot} " \ 113 "rootfstype=${nandrootfstype} "\ 114 "${extra_options}\0" \ 115 "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ 116 "bootscript=echo Running bootscript from mmc ...; " \ 117 "source ${loadaddr}\0" \ 118 "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ 119 "mmcboot=echo Booting from mmc ...; " \ 120 "run mmcargs; " \ 121 "bootm ${loadaddr}\0" \ 122 "nandboot=echo Booting from nand ...; " \ 123 "run nandargs; " \ 124 "nand read ${loadaddr} 280000 400000; " \ 125 "bootm ${loadaddr}\0" \ 126 127 #define CONFIG_BOOTCOMMAND \ 128 "if mmc rescan ${mmcdev}; then " \ 129 "if run loadbootscript; then " \ 130 "run bootscript; " \ 131 "else " \ 132 "if run loaduimage; then " \ 133 "run mmcboot; " \ 134 "else run nandboot; " \ 135 "fi; " \ 136 "fi; " \ 137 "else run nandboot; fi" 138 139 /* 140 * Miscellaneous configurable options 141 */ 142 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 143 144 /* turn on command-line edit/hist/auto */ 145 #define CONFIG_CMDLINE_EDITING 146 #define CONFIG_AUTO_COMPLETE 147 148 #define CONFIG_SYS_ALT_MEMTEST 1 149 #define CONFIG_SYS_MEMTEST_START (0x82000000) /* memtest */ 150 /* defaults */ 151 #define CONFIG_SYS_MEMTEST_END (0x83FFFFFF) /* 64MB */ 152 #define CONFIG_SYS_MEMTEST_SCRATCH (0x81000000) /* dummy address */ 153 154 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default */ 155 /* load address */ 156 #define CONFIG_SYS_TEXT_BASE 0x80008000 157 158 /* 159 * OMAP3 has 12 GP timers, they can be driven by the system clock 160 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). 161 * This rate is divided by a local divisor. 162 */ 163 #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) 164 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 165 166 /* 167 * Physical Memory Map 168 */ 169 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ 170 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 171 #define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ 172 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 173 174 /* 175 * FLASH and environment organization 176 */ 177 178 /* **** PISMO SUPPORT *** */ 179 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ 180 #define CONFIG_SYS_FLASH_BASE NAND_BASE 181 182 /* Monitor at start of flash */ 183 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 184 #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP 185 186 #define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ 187 188 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) 189 #define CONFIG_ENV_OFFSET 0x260000 190 #define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET 191 192 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 193 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 194 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 195 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 196 CONFIG_SYS_INIT_RAM_SIZE - \ 197 GENERATED_GBL_DATA_SIZE) 198 199 /* 200 * USB 201 * 202 * Currently only EHCI is enabled, the MUSB OTG controller 203 * is not enabled. 204 */ 205 206 /* USB EHCI */ 207 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 162 208 209 /* Defines for SPL */ 210 #define CONFIG_SPL_FRAMEWORK 211 212 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 213 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" 214 215 #define CONFIG_SPL_NAND_BASE 216 #define CONFIG_SPL_NAND_DRIVERS 217 #define CONFIG_SPL_NAND_ECC 218 219 /* NAND boot config */ 220 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 221 #define CONFIG_SYS_NAND_PAGE_COUNT 64 222 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 223 #define CONFIG_SYS_NAND_OOBSIZE 64 224 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 225 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 226 /* 227 * Use the ECC/OOB layout from omap_gpmc.h that matches your chip: 228 * SP vs LP, 8bit vs 16bit: GPMC_NAND_HW_ECC_LAYOUT 229 */ 230 #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 231 10, 11, 12, 13 } 232 #define CONFIG_SYS_NAND_ECCSIZE 512 233 #define CONFIG_SYS_NAND_ECCBYTES 3 234 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW 235 236 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 237 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 238 239 #define CONFIG_SPL_TEXT_BASE 0x40200800 240 #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ 241 CONFIG_SPL_TEXT_BASE) 242 243 /* 244 * Use 0x80008000 as TEXT_BASE here for compatibility reasons with the 245 * older x-loader implementations. And move the BSS area so that it 246 * doesn't overlap with TEXT_BASE. 247 */ 248 #define CONFIG_SYS_TEXT_BASE 0x80008000 249 #define CONFIG_SPL_BSS_START_ADDR 0x80100000 250 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ 251 252 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 253 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 254 255 #endif /* __CONFIG_H */ 256