1 /* 2 * Copyright (C) 2011 3 * Stefano Babic, DENX Software Engineering, sbabic@denx.de. 4 * 5 * Copyright (C) 2009 TechNexion Ltd. 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License as published by 9 * the Free Software Foundation; either version 2 of the License, or 10 * (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc. 20 */ 21 22 #ifndef __TAM3517_H 23 #define __TAM3517_H 24 25 /* 26 * High Level Configuration Options 27 */ 28 #define CONFIG_OMAP /* in a TI OMAP core */ 29 #define CONFIG_OMAP34XX /* which is a 34XX */ 30 #define CONFIG_OMAP_GPIO 31 32 #define CONFIG_SYS_TEXT_BASE 0x80008000 33 34 #define CONFIG_SYS_CACHELINE_SIZE 64 35 36 #define CONFIG_EMIF4 /* The chip has EMIF4 controller */ 37 38 #include <asm/arch/cpu.h> /* get chip and board defs */ 39 #include <asm/arch/omap3.h> 40 41 /* 42 * Display CPU and Board information 43 */ 44 #define CONFIG_DISPLAY_CPUINFO 45 #define CONFIG_DISPLAY_BOARDINFO 46 47 /* Clock Defines */ 48 #define V_OSCK 26000000 /* Clock output from T2 */ 49 #define V_SCLK (V_OSCK >> 1) 50 51 #define CONFIG_MISC_INIT_R 52 53 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 54 #define CONFIG_SETUP_MEMORY_TAGS 55 #define CONFIG_INITRD_TAG 56 #define CONFIG_REVISION_TAG 57 58 /* 59 * Size of malloc() pool 60 */ 61 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB sector */ 62 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10) + \ 63 2 * 1024 * 1024) 64 /* 65 * DDR related 66 */ 67 #define CONFIG_OMAP3_MICRON_DDR /* Micron DDR */ 68 #define CONFIG_SYS_CS0_SIZE (256 * 1024 * 1024) 69 70 /* 71 * Hardware drivers 72 */ 73 74 /* 75 * NS16550 Configuration 76 */ 77 #define CONFIG_SYS_NS16550 78 #define CONFIG_SYS_NS16550_SERIAL 79 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 80 #define CONFIG_SYS_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ 81 82 /* 83 * select serial console configuration 84 */ 85 #define CONFIG_CONS_INDEX 1 86 #define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 87 #define CONFIG_SERIAL1 /* UART1 */ 88 89 /* allow to overwrite serial and ethaddr */ 90 #define CONFIG_ENV_OVERWRITE 91 #define CONFIG_BAUDRATE 115200 92 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 93 115200} 94 #define CONFIG_MMC 95 #define CONFIG_OMAP_HSMMC 96 #define CONFIG_GENERIC_MMC 97 #define CONFIG_DOS_PARTITION 98 99 /* EHCI */ 100 #define CONFIG_OMAP3_GPIO_5 101 #define CONFIG_USB_EHCI 102 #define CONFIG_USB_EHCI_OMAP 103 #define CONFIG_USB_ULPI 104 #define CONFIG_USB_ULPI_VIEWPORT_OMAP 105 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 25 106 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 107 #define CONFIG_USB_STORAGE 108 109 /* #define CONFIG_EHCI_DCACHE */ 110 111 /* commands to include */ 112 #include <config_cmd_default.h> 113 114 #define CONFIG_CMD_CACHE 115 #define CONFIG_CMD_DHCP 116 #define CONFIG_CMD_EXT2 /* EXT2 Support */ 117 #define CONFIG_CMD_FAT /* FAT support */ 118 #define CONFIG_CMD_GPIO 119 #define CONFIG_CMD_I2C /* I2C serial bus support */ 120 #define CONFIG_CMD_MII 121 #define CONFIG_CMD_MMC /* MMC support */ 122 #define CONFIG_CMD_NET 123 #define CONFIG_CMD_NFS 124 #define CONFIG_CMD_NAND /* NAND support */ 125 #define CONFIG_CMD_PING 126 #define CONFIG_CMD_USB 127 #define CONFIG_CMD_EEPROM 128 129 #undef CONFIG_CMD_FLASH /* only NAND on the SOM */ 130 #undef CONFIG_CMD_IMLS 131 132 #define CONFIG_SYS_NO_FLASH 133 #define CONFIG_HARD_I2C 134 #define CONFIG_SYS_I2C_SPEED 400000 135 #define CONFIG_SYS_I2C_SLAVE 1 136 #define CONFIG_SYS_I2C_BUS 0 137 #define CONFIG_SYS_I2C_BUS_SELECT 1 138 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* base address */ 139 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */ 140 #define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07 141 #define CONFIG_DRIVER_OMAP34XX_I2C 142 143 144 /* 145 * Board NAND Info. 146 */ 147 #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ 148 /* to access */ 149 /* nand at CS0 */ 150 151 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */ 152 /* NAND devices */ 153 154 #define CONFIG_AUTO_COMPLETE 155 156 /* 157 * Miscellaneous configurable options 158 */ 159 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 160 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ 161 #define CONFIG_CMDLINE_EDITING 162 #define CONFIG_AUTO_COMPLETE 163 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ 164 165 /* Print Buffer Size */ 166 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 167 sizeof(CONFIG_SYS_PROMPT) + 16) 168 #define CONFIG_SYS_MAXARGS 32 /* max number of command */ 169 /* args */ 170 /* Boot Argument Buffer Size */ 171 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) 172 /* memtest works on */ 173 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) 174 #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ 175 0x01F00000) /* 31MB */ 176 177 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */ 178 /* address */ 179 180 /* 181 * AM3517 has 12 GP timers, they can be driven by the system clock 182 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). 183 * This rate is divided by a local divisor. 184 */ 185 #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 186 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 187 #define CONFIG_SYS_HZ 1000 188 189 /* 190 * Physical Memory Map 191 */ 192 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ 193 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 194 #define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ 195 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 196 197 /* 198 * FLASH and environment organization 199 */ 200 201 /* **** PISMO SUPPORT *** */ 202 203 /* Configure the PISMO */ 204 #define PISMO1_NAND_SIZE GPMC_SIZE_128M 205 206 #define CONFIG_NAND_OMAP_GPMC 207 #define GPMC_NAND_ECC_LP_x16_LAYOUT 208 #define CONFIG_ENV_IS_IN_NAND 209 #define SMNAND_ENV_OFFSET 0x180000 /* environment starts here */ 210 211 /* Redundant Environment */ 212 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ 213 #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET 214 #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET 215 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \ 216 2 * CONFIG_SYS_ENV_SECT_SIZE) 217 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE 218 219 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 220 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 221 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 222 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 223 CONFIG_SYS_INIT_RAM_SIZE - \ 224 GENERATED_GBL_DATA_SIZE) 225 226 /* 227 * ethernet support, EMAC 228 * 229 */ 230 #define CONFIG_DRIVER_TI_EMAC 231 #define CONFIG_DRIVER_TI_EMAC_USE_RMII 232 #define CONFIG_MII 233 #define CONFIG_EMAC_MDIO_PHY_NUM 0 234 #define CONFIG_BOOTP_DEFAULT 235 #define CONFIG_BOOTP_DNS 236 #define CONFIG_BOOTP_DNS2 237 #define CONFIG_BOOTP_SEND_HOSTNAME 238 #define CONFIG_NET_RETRY_COUNT 10 239 240 /* Defines for SPL */ 241 #define CONFIG_SPL 242 #define CONFIG_SPL_FRAMEWORK 243 #define CONFIG_SPL_BOARD_INIT 244 #define CONFIG_SPL_CONSOLE 245 #define CONFIG_SPL_NAND_SIMPLE 246 #define CONFIG_SPL_NAND_SOFTECC 247 #define CONFIG_SPL_NAND_WORKSPACE 0x8f07f000 /* below BSS */ 248 249 #define CONFIG_SPL_LIBCOMMON_SUPPORT 250 #define CONFIG_SPL_LIBDISK_SUPPORT 251 #define CONFIG_SPL_I2C_SUPPORT 252 #define CONFIG_SPL_LIBGENERIC_SUPPORT 253 #define CONFIG_SPL_SERIAL_SUPPORT 254 #define CONFIG_SPL_GPIO_SUPPORT 255 #define CONFIG_SPL_POWER_SUPPORT 256 #define CONFIG_SPL_NAND_SUPPORT 257 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" 258 259 #define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ 260 #define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ 261 #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK 262 263 #define CONFIG_SYS_SPL_MALLOC_START 0x8f000000 264 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 265 #define CONFIG_SPL_BSS_START_ADDR 0x8f080000 /* end of RAM */ 266 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 267 268 /* NAND boot config */ 269 #define CONFIG_SYS_NAND_PAGE_COUNT 64 270 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 271 #define CONFIG_SYS_NAND_OOBSIZE 64 272 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 273 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 274 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 275 #define CONFIG_SYS_NAND_ECCPOS {40, 41, 42, 43, 44, 45, 46, 47,\ 276 48, 49, 50, 51, 52, 53, 54, 55,\ 277 56, 57, 58, 59, 60, 61, 62, 63} 278 #define CONFIG_SYS_NAND_ECCSIZE 256 279 #define CONFIG_SYS_NAND_ECCBYTES 3 280 281 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 282 283 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 284 #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000 285 286 #define CONFIG_OF_LIBFDT 287 #define CONFIG_FIT 288 #define CONFIG_CMD_UBI 289 #define CONFIG_CMD_UBIFS 290 #define CONFIG_RBTREE 291 #define CONFIG_LZO 292 #define CONFIG_MTD_PARTITIONS 293 #define CONFIG_MTD_DEVICE 294 #define CONFIG_CMD_MTDPARTS 295 296 /* Setup MTD for NAND on the SOM */ 297 #define MTDIDS_DEFAULT "nand0=omap2-nand.0" 298 #define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:512k(MLO)," \ 299 "1m(u-boot),256k(env1)," \ 300 "256k(env2),6m(kernel),-(rootfs)" 301 302 #define xstr(s) str(s) 303 #define str(s) #s 304 305 #define CONFIG_TAM3517_SETTINGS \ 306 "netdev=eth0\0" \ 307 "nandargs=setenv bootargs root=${nandroot} " \ 308 "rootfstype=${nandrootfstype}\0" \ 309 "nfsargs=setenv bootargs root=/dev/nfs rw " \ 310 "nfsroot=${serverip}:${rootpath}\0" \ 311 "ramargs=setenv bootargs root=/dev/ram rw\0" \ 312 "addip_sta=setenv bootargs ${bootargs} " \ 313 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ 314 ":${hostname}:${netdev}:off panic=1\0" \ 315 "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \ 316 "addip=if test -n ${ipdyn};then run addip_dyn;" \ 317 "else run addip_sta;fi\0" \ 318 "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ 319 "addtty=setenv bootargs ${bootargs}" \ 320 " console=ttyO0,${baudrate}\0" \ 321 "addmisc=setenv bootargs ${bootargs} ${misc}\0" \ 322 "loadaddr=82000000\0" \ 323 "kernel_addr_r=82000000\0" \ 324 "hostname=" xstr(CONFIG_HOSTNAME) "\0" \ 325 "bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0" \ 326 "flash_self=run ramargs addip addtty addmtd addmisc;" \ 327 "bootm ${kernel_addr} ${ramdisk_addr}\0" \ 328 "flash_nfs=run nfsargs addip addtty addmtd addmisc;" \ 329 "bootm ${kernel_addr}\0" \ 330 "nandboot=run nandargs addip addtty addmtd addmisc;" \ 331 "nand read ${kernel_addr_r} kernel\0" \ 332 "bootm ${kernel_addr_r}\0" \ 333 "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ 334 "run nfsargs addip addtty addmtd addmisc;" \ 335 "bootm ${kernel_addr_r}\0" \ 336 "net_self=if run net_self_load;then " \ 337 "run ramargs addip addtty addmtd addmisc;" \ 338 "bootm ${kernel_addr_r} ${ramdisk_addr_r};" \ 339 "else echo Images not loades;fi\0" \ 340 "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.img\0" \ 341 "load=tftp ${loadaddr} ${u-boot}\0" \ 342 "loadmlo=tftp ${loadaddr} ${mlo}\0" \ 343 "mlo=" xstr(CONFIG_HOSTNAME) "/MLO\0" \ 344 "uboot_addr=0x80000\0" \ 345 "update=nandecc sw;nand erase ${uboot_addr} 100000;" \ 346 "nand write ${loadaddr} ${uboot_addr} 80000\0" \ 347 "updatemlo=nandecc hw;nand erase 0 20000;" \ 348 "nand write ${loadaddr} 0 20000\0" \ 349 "upd=if run load;then echo Updating u-boot;if run update;" \ 350 "then echo U-Boot updated;" \ 351 "else echo Error updating u-boot !;" \ 352 "echo Board without bootloader !!;" \ 353 "fi;" \ 354 "else echo U-Boot not downloaded..exiting;fi\0" \ 355 356 357 /* 358 * this is common code for all TAM3517 boards. 359 * MAC address is stored from manufacturer in 360 * I2C EEPROM 361 */ 362 #if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) 363 364 /* 365 * The I2C EEPROM on the TAM3517 contains 366 * mac address and production data 367 */ 368 struct tam3517_module_info { 369 char customer[48]; 370 char product[48]; 371 372 /* 373 * bit 0~47 : sequence number 374 * bit 48~55 : week of year, from 0. 375 * bit 56~63 : year 376 */ 377 unsigned long long sequence_number; 378 379 /* 380 * bit 0~7 : revision fixed 381 * bit 8~15 : revision major 382 * bit 16~31 : TNxxx 383 */ 384 unsigned int revision; 385 unsigned char eth_addr[4][8]; 386 unsigned char _rev[100]; 387 }; 388 389 #define TAM3517_READ_MAC_FROM_EEPROM \ 390 do { \ 391 struct tam3517_module_info info;\ 392 char buf[80], ethname[20]; \ 393 int i; \ 394 i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); \ 395 if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, \ 396 (void *)&info, sizeof(info))) \ 397 break; \ 398 memset(buf, 0, sizeof(buf)); \ 399 for (i = 0 ; i < ARRAY_SIZE(info.eth_addr); i++) { \ 400 sprintf(buf, "%02X:%02X:%02X:%02X:%02X:%02X", \ 401 info.eth_addr[i][5], \ 402 info.eth_addr[i][4], \ 403 info.eth_addr[i][3], \ 404 info.eth_addr[i][2], \ 405 info.eth_addr[i][1], \ 406 info.eth_addr[i][0]); \ 407 \ 408 if (i) \ 409 sprintf(ethname, "eth%daddr", i); \ 410 else \ 411 sprintf(ethname, "ethaddr"); \ 412 printf("Setting %s from EEPROM with %s\n", ethname, buf);\ 413 setenv(ethname, buf); \ 414 } \ 415 } while (0) 416 #endif 417 418 #endif /* __TAM3517_H */ 419