1 /* 2 * Copyright 2011-2012 Freescale Semiconductor, Inc. 3 * 4 * See file CREDITS for list of people who contributed to this 5 * project. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23 /* 24 * Corenet DS style board configuration file 25 */ 26 #ifndef __CONFIG_H 27 #define __CONFIG_H 28 29 #ifdef CONFIG_RAMBOOT_PBL 30 #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE 31 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 32 #define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_pbi.cfg 33 #define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_rcw.cfg 34 #endif 35 36 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE 37 /* Set 1M boot space */ 38 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) 39 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ 40 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) 41 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 42 #define CONFIG_SYS_NO_FLASH 43 #endif 44 45 #define CONFIG_CMD_REGINFO 46 47 /* High Level Configuration Options */ 48 #define CONFIG_BOOKE 49 #define CONFIG_E500 /* BOOKE e500 family */ 50 #define CONFIG_E500MC /* BOOKE e500mc family */ 51 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 52 #define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ 53 #define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ 54 #define CONFIG_MP /* support multiple processors */ 55 56 #ifndef CONFIG_SYS_TEXT_BASE 57 #define CONFIG_SYS_TEXT_BASE 0xeff80000 58 #endif 59 60 #ifndef CONFIG_RESET_VECTOR_ADDRESS 61 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 62 #endif 63 64 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 65 #define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS 66 #define CONFIG_FSL_IFC /* Enable IFC Support */ 67 #define CONFIG_PCI /* Enable PCI/PCIE */ 68 #define CONFIG_PCIE1 /* PCIE controler 1 */ 69 #define CONFIG_PCIE2 /* PCIE controler 2 */ 70 #define CONFIG_PCIE3 /* PCIE controler 3 */ 71 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 72 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 73 74 #define CONFIG_SYS_SRIO 75 #define CONFIG_SRIO1 /* SRIO port 1 */ 76 #define CONFIG_SRIO2 /* SRIO port 2 */ 77 #define CONFIG_SRIO_PCIE_BOOT_MASTER 78 79 #define CONFIG_FSL_LAW /* Use common FSL init code */ 80 81 #define CONFIG_ENV_OVERWRITE 82 83 #ifdef CONFIG_SYS_NO_FLASH 84 #if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL) 85 #define CONFIG_ENV_IS_NOWHERE 86 #endif 87 #else 88 #define CONFIG_FLASH_CFI_DRIVER 89 #define CONFIG_SYS_FLASH_CFI 90 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 91 #endif 92 93 #if defined(CONFIG_SPIFLASH) 94 #define CONFIG_SYS_EXTRA_ENV_RELOC 95 #define CONFIG_ENV_IS_IN_SPI_FLASH 96 #define CONFIG_ENV_SPI_BUS 0 97 #define CONFIG_ENV_SPI_CS 0 98 #define CONFIG_ENV_SPI_MAX_HZ 10000000 99 #define CONFIG_ENV_SPI_MODE 0 100 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 101 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 102 #define CONFIG_ENV_SECT_SIZE 0x10000 103 #elif defined(CONFIG_SDCARD) 104 #define CONFIG_SYS_EXTRA_ENV_RELOC 105 #define CONFIG_ENV_IS_IN_MMC 106 #define CONFIG_SYS_MMC_ENV_DEV 0 107 #define CONFIG_ENV_SIZE 0x2000 108 #define CONFIG_ENV_OFFSET (512 * 1097) 109 #elif defined(CONFIG_NAND) 110 #define CONFIG_SYS_EXTRA_ENV_RELOC 111 #define CONFIG_ENV_IS_IN_NAND 112 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 113 #define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) 114 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 115 #define CONFIG_ENV_IS_IN_REMOTE 116 #define CONFIG_ENV_ADDR 0xffe20000 117 #define CONFIG_ENV_SIZE 0x2000 118 #elif defined(CONFIG_ENV_IS_NOWHERE) 119 #define CONFIG_ENV_SIZE 0x2000 120 #else 121 #define CONFIG_ENV_IS_IN_FLASH 122 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 123 #define CONFIG_ENV_SIZE 0x2000 124 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 125 #endif 126 127 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() 128 #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() 129 130 #ifndef __ASSEMBLY__ 131 unsigned long get_board_sys_clk(void); 132 unsigned long get_board_ddr_clk(void); 133 #endif 134 135 /* 136 * These can be toggled for performance analysis, otherwise use default. 137 */ 138 #define CONFIG_SYS_CACHE_STASHING 139 #define CONFIG_BTB /* toggle branch predition */ 140 #define CONFIG_DDR_ECC 141 #ifdef CONFIG_DDR_ECC 142 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 143 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 144 #endif 145 146 #define CONFIG_ENABLE_36BIT_PHYS 147 148 #ifdef CONFIG_PHYS_64BIT 149 #define CONFIG_ADDR_MAP 150 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 151 #endif 152 153 #if 0 154 #define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */ 155 #endif 156 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 157 #define CONFIG_SYS_MEMTEST_END 0x00400000 158 #define CONFIG_SYS_ALT_MEMTEST 159 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 160 161 /* 162 * Config the L3 Cache as L3 SRAM 163 */ 164 #define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE 165 166 #ifdef CONFIG_PHYS_64BIT 167 #define CONFIG_SYS_DCSRBAR 0xf0000000 168 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 169 #endif 170 171 /* EEPROM */ 172 #define CONFIG_ID_EEPROM 173 #define CONFIG_SYS_I2C_EEPROM_NXID 174 #define CONFIG_SYS_EEPROM_BUS_NUM 0 175 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 176 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 177 178 /* 179 * DDR Setup 180 */ 181 #define CONFIG_VERY_BIG_RAM 182 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 183 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 184 185 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */ 186 #define CONFIG_DIMM_SLOTS_PER_CTLR 2 187 #define CONFIG_CHIP_SELECTS_PER_CTRL 4 188 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE 189 190 #define CONFIG_DDR_SPD 191 #define CONFIG_FSL_DDR3 192 193 #define CONFIG_SYS_SPD_BUS_NUM 0 194 #define SPD_EEPROM_ADDRESS1 0x51 195 #define SPD_EEPROM_ADDRESS2 0x52 196 #define SPD_EEPROM_ADDRESS3 0x53 197 #define SPD_EEPROM_ADDRESS4 0x54 198 #define SPD_EEPROM_ADDRESS5 0x55 199 #define SPD_EEPROM_ADDRESS6 0x56 200 #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */ 201 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 202 203 /* 204 * IFC Definitions 205 */ 206 #define CONFIG_SYS_FLASH_BASE 0xe0000000 207 #ifdef CONFIG_PHYS_64BIT 208 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 209 #else 210 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 211 #endif 212 213 #define CONFIG_SYS_NOR0_CSPR_EXT (0xf) 214 #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ 215 + 0x8000000) | \ 216 CSPR_PORT_SIZE_16 | \ 217 CSPR_MSEL_NOR | \ 218 CSPR_V) 219 #define CONFIG_SYS_NOR1_CSPR_EXT (0xf) 220 #define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 221 CSPR_PORT_SIZE_16 | \ 222 CSPR_MSEL_NOR | \ 223 CSPR_V) 224 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) 225 /* NOR Flash Timing Params */ 226 #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 227 228 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 229 FTIM0_NOR_TEADC(0x5) | \ 230 FTIM0_NOR_TEAHC(0x5)) 231 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 232 FTIM1_NOR_TRAD_NOR(0x1A) |\ 233 FTIM1_NOR_TSEQRAD_NOR(0x13)) 234 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ 235 FTIM2_NOR_TCH(0x4) | \ 236 FTIM2_NOR_TWPH(0x0E) | \ 237 FTIM2_NOR_TWP(0x1c)) 238 #define CONFIG_SYS_NOR_FTIM3 0x0 239 240 #define CONFIG_SYS_FLASH_QUIET_TEST 241 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 242 243 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 244 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 245 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 246 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 247 248 #define CONFIG_SYS_FLASH_EMPTY_INFO 249 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ 250 + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} 251 252 #define CONFIG_FSL_QIXIS /* use common QIXIS code */ 253 #define QIXIS_BASE 0xffdf0000 254 #define QIXIS_LBMAP_SWITCH 6 255 #define QIXIS_LBMAP_MASK 0x0f 256 #define QIXIS_LBMAP_SHIFT 0 257 #define QIXIS_LBMAP_DFLTBANK 0x00 258 #define QIXIS_LBMAP_ALTBANK 0x04 259 #define QIXIS_RST_CTL_RESET 0x83 260 #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 261 #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 262 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 263 #ifdef CONFIG_PHYS_64BIT 264 #define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE) 265 #else 266 #define QIXIS_BASE_PHYS QIXIS_BASE 267 #endif 268 269 #define CONFIG_SYS_CSPR3_EXT (0xf) 270 #define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ 271 | CSPR_PORT_SIZE_8 \ 272 | CSPR_MSEL_GPCM \ 273 | CSPR_V) 274 #define CONFIG_SYS_AMASK3 IFC_AMASK(4 * 1024) 275 #define CONFIG_SYS_CSOR3 0x0 276 /* QIXIS Timing parameters for IFC CS3 */ 277 #define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 278 FTIM0_GPCM_TEADC(0x0e) | \ 279 FTIM0_GPCM_TEAHC(0x0e)) 280 #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ 281 FTIM1_GPCM_TRAD(0x3f)) 282 #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 283 FTIM2_GPCM_TCH(0x0) | \ 284 FTIM2_GPCM_TWP(0x1f)) 285 #define CONFIG_SYS_CS3_FTIM3 0x0 286 287 /* NAND Flash on IFC */ 288 #define CONFIG_NAND_FSL_IFC 289 #define CONFIG_SYS_NAND_BASE 0xff800000 290 #ifdef CONFIG_PHYS_64BIT 291 #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) 292 #else 293 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 294 #endif 295 296 #define CONFIG_SYS_NAND_CSPR_EXT (0xf) 297 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 298 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ 299 | CSPR_MSEL_NAND /* MSEL = NAND */ \ 300 | CSPR_V) 301 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 302 303 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 304 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 305 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 306 | CSOR_NAND_RAL_3 /* RAL = 2Byes */ \ 307 | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ 308 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \ 309 | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ 310 311 #define CONFIG_SYS_NAND_ONFI_DETECTION 312 313 /* ONFI NAND Flash mode0 Timing Params */ 314 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ 315 FTIM0_NAND_TWP(0x18) | \ 316 FTIM0_NAND_TWCHT(0x07) | \ 317 FTIM0_NAND_TWH(0x0a)) 318 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ 319 FTIM1_NAND_TWBE(0x39) | \ 320 FTIM1_NAND_TRR(0x0e) | \ 321 FTIM1_NAND_TRP(0x18)) 322 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ 323 FTIM2_NAND_TREH(0x0a) | \ 324 FTIM2_NAND_TWHRE(0x1e)) 325 #define CONFIG_SYS_NAND_FTIM3 0x0 326 327 #define CONFIG_SYS_NAND_DDR_LAW 11 328 329 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 330 #define CONFIG_SYS_MAX_NAND_DEVICE 1 331 #define CONFIG_MTD_NAND_VERIFY_WRITE 332 #define CONFIG_CMD_NAND 333 334 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 335 336 #if defined(CONFIG_NAND) 337 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT 338 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 339 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 340 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 341 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 342 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 343 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 344 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 345 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR0_CSPR_EXT 346 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR0_CSPR 347 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK 348 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR 349 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 350 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 351 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 352 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 353 #else 354 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT 355 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR 356 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 357 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 358 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 359 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 360 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 361 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 362 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT 363 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR 364 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK 365 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR 366 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0 367 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1 368 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 369 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 370 #endif 371 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT 372 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR 373 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 374 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 375 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 376 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 377 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 378 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 379 380 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 381 382 #if defined(CONFIG_RAMBOOT_PBL) 383 #define CONFIG_SYS_RAMBOOT 384 #endif 385 386 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ 387 #define CONFIG_MISC_INIT_R 388 389 #define CONFIG_HWCONFIG 390 391 /* define to use L1 as initial stack */ 392 #define CONFIG_L1_INIT_RAM 393 #define CONFIG_SYS_INIT_RAM_LOCK 394 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ 395 #ifdef CONFIG_PHYS_64BIT 396 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 397 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe0ec000 398 /* The assembler doesn't like typecast */ 399 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 400 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 401 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 402 #else 403 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS 0xfe0ec000 /* Initial L1 address */ 404 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 405 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS 406 #endif 407 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 408 409 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 410 GENERATED_GBL_DATA_SIZE) 411 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 412 413 #define CONFIG_SYS_MONITOR_LEN (512 * 1024) 414 #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) 415 416 /* Serial Port - controlled on board with jumper J8 417 * open - index 2 418 * shorted - index 1 419 */ 420 #define CONFIG_CONS_INDEX 1 421 #define CONFIG_SYS_NS16550 422 #define CONFIG_SYS_NS16550_SERIAL 423 #define CONFIG_SYS_NS16550_REG_SIZE 1 424 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 425 426 #define CONFIG_SYS_BAUDRATE_TABLE \ 427 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 428 429 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 430 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 431 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 432 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 433 434 /* Use the HUSH parser */ 435 #define CONFIG_SYS_HUSH_PARSER 436 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 437 438 /* pass open firmware flat tree */ 439 #define CONFIG_OF_LIBFDT 440 #define CONFIG_OF_BOARD_SETUP 441 #define CONFIG_OF_STDOUT_VIA_ALIAS 442 443 /* new uImage format support */ 444 #define CONFIG_FIT 445 #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ 446 447 /* I2C */ 448 #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ 449 #define CONFIG_HARD_I2C /* I2C with hardware support */ 450 #define CONFIG_I2C_MULTI_BUS 451 #define CONFIG_I2C_CMD_TREE 452 #define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed */ 453 #define CONFIG_SYS_I2C_SLAVE 0x7F 454 #define CONFIG_SYS_I2C_OFFSET 0x118000 455 #define CONFIG_SYS_I2C2_OFFSET 0x118100 456 #define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */ 457 #define I2C_MUX_PCA_ADDR_SEC 0x76 /* I2C bus multiplexer,secondary */ 458 459 #define I2C_MUX_CH_DEFAULT 0x8 460 #define I2C_MUX_CH_VOL_MONITOR 0xa 461 #define I2C_MUX_CH_VSC3316_FS 0xc 462 #define I2C_MUX_CH_VSC3316_BS 0xd 463 464 /* Voltage monitor on channel 2*/ 465 #define I2C_VOL_MONITOR_ADDR 0x40 466 #define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 467 #define I2C_VOL_MONITOR_BUS_V_OVF 0x1 468 #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 469 470 /* VSC Crossbar switches */ 471 #define CONFIG_VSC_CROSSBAR 472 #define VSC3316_FSM_TX_ADDR 0x70 473 #define VSC3316_FSM_RX_ADDR 0x71 474 475 /* 476 * RapidIO 477 */ 478 #define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000 479 #ifdef CONFIG_PHYS_64BIT 480 #define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull 481 #else 482 #define CONFIG_SYS_SRIO1_MEM_PHYS 0xa0000000 483 #endif 484 #define CONFIG_SYS_SRIO1_MEM_SIZE 0x10000000 /* 256M */ 485 486 #define CONFIG_SYS_SRIO2_MEM_VIRT 0xb0000000 487 #ifdef CONFIG_PHYS_64BIT 488 #define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull 489 #else 490 #define CONFIG_SYS_SRIO2_MEM_PHYS 0xb0000000 491 #endif 492 #define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */ 493 494 /* 495 * for slave u-boot IMAGE instored in master memory space, 496 * PHYS must be aligned based on the SIZE 497 */ 498 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull 499 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull 500 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000 /* 512K */ 501 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull 502 /* 503 * for slave UCODE and ENV instored in master memory space, 504 * PHYS must be aligned based on the SIZE 505 */ 506 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull 507 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull 508 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ 509 510 /* slave core release by master*/ 511 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 512 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ 513 514 /* 515 * SRIO_PCIE_BOOT - SLAVE 516 */ 517 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE 518 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 519 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ 520 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) 521 #endif 522 /* 523 * eSPI - Enhanced SPI 524 */ 525 #define CONFIG_FSL_ESPI 526 #define CONFIG_SPI_FLASH 527 #define CONFIG_SPI_FLASH_SST 528 #define CONFIG_CMD_SF 529 #define CONFIG_SF_DEFAULT_SPEED 10000000 530 #define CONFIG_SF_DEFAULT_MODE 0 531 532 /* 533 * General PCI 534 * Memory space is mapped 1-1, but I/O space must start from 0. 535 */ 536 537 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 538 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 539 #ifdef CONFIG_PHYS_64BIT 540 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 541 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 542 #else 543 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 544 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 545 #endif 546 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 547 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 548 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 549 #ifdef CONFIG_PHYS_64BIT 550 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 551 #else 552 #define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 553 #endif 554 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 555 556 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 557 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 558 #ifdef CONFIG_PHYS_64BIT 559 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 560 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 561 #else 562 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 563 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 564 #endif 565 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 566 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 567 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 568 #ifdef CONFIG_PHYS_64BIT 569 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 570 #else 571 #define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 572 #endif 573 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 574 575 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 576 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 577 #ifdef CONFIG_PHYS_64BIT 578 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 579 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull 580 #else 581 #define CONFIG_SYS_PCIE3_MEM_BUS 0xc0000000 582 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc0000000 583 #endif 584 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ 585 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 586 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 587 #ifdef CONFIG_PHYS_64BIT 588 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 589 #else 590 #define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 591 #endif 592 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 593 594 /* controller 4, Base address 203000 */ 595 #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 596 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc60000000ull 597 #define CONFIG_SYS_PCIE4_MEM_SIZE 0x20000000 /* 512M */ 598 #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 599 #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull 600 #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ 601 602 /* Qman/Bman */ 603 #ifndef CONFIG_NOBQFMAN 604 #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ 605 #define CONFIG_SYS_BMAN_NUM_PORTALS 50 606 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 607 #ifdef CONFIG_PHYS_64BIT 608 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 609 #else 610 #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE 611 #endif 612 #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 613 #define CONFIG_SYS_QMAN_NUM_PORTALS 50 614 #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 615 #ifdef CONFIG_PHYS_64BIT 616 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull 617 #else 618 #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE 619 #endif 620 #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 621 622 #define CONFIG_SYS_DPAA_FMAN 623 #define CONFIG_SYS_DPAA_PME 624 #define CONFIG_SYS_PMAN 625 #define CONFIG_SYS_DPAA_DCE 626 #define CONFIG_SYS_INTERLAKEN 627 628 /* Default address of microcode for the Linux Fman driver */ 629 #if defined(CONFIG_SPIFLASH) 630 /* 631 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 632 * env, so we got 0x110000. 633 */ 634 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 635 #define CONFIG_SYS_QE_FMAN_FW_ADDR 0x110000 636 #elif defined(CONFIG_SDCARD) 637 /* 638 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 639 * about 545KB (1089 blocks), Env is stored after the image, and the env size is 640 * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. 641 */ 642 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 643 #define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130) 644 #elif defined(CONFIG_NAND) 645 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 646 #define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) 647 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 648 /* 649 * Slave has no ucode locally, it can fetch this from remote. When implementing 650 * in two corenet boards, slave's ucode could be stored in master's memory 651 * space, the address can be mapped from slave TLB->slave LAW-> 652 * slave SRIO or PCIE outbound window->master inbound window-> 653 * master LAW->the ucode address in master's memory space. 654 */ 655 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE 656 #define CONFIG_SYS_QE_FMAN_FW_ADDR 0xFFE00000 657 #else 658 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 659 #define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 660 #endif 661 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 662 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 663 #endif /* CONFIG_NOBQFMAN */ 664 665 #ifdef CONFIG_SYS_DPAA_FMAN 666 #define CONFIG_FMAN_ENET 667 #define CONFIG_PHYLIB_10G 668 #define CONFIG_PHY_VITESSE 669 #define CONFIG_PHY_TERANETICS 670 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C 671 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D 672 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E 673 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F 674 #define FM1_10GEC1_PHY_ADDR 0x0 675 #define FM1_10GEC2_PHY_ADDR 0x1 676 #define FM2_10GEC1_PHY_ADDR 0x2 677 #define FM2_10GEC2_PHY_ADDR 0x3 678 #endif 679 680 #ifdef CONFIG_PCI 681 #define CONFIG_PCI_INDIRECT_BRIDGE 682 #define CONFIG_NET_MULTI 683 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 684 #define CONFIG_E1000 685 686 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 687 #define CONFIG_DOS_PARTITION 688 #endif /* CONFIG_PCI */ 689 690 /* SATA */ 691 #ifdef CONFIG_FSL_SATA_V2 692 #define CONFIG_LIBATA 693 #define CONFIG_FSL_SATA 694 695 #define CONFIG_SYS_SATA_MAX_DEVICE 2 696 #define CONFIG_SATA1 697 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 698 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 699 #define CONFIG_SATA2 700 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 701 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 702 703 #define CONFIG_LBA48 704 #define CONFIG_CMD_SATA 705 #define CONFIG_DOS_PARTITION 706 #define CONFIG_CMD_EXT2 707 #endif 708 709 #ifdef CONFIG_FMAN_ENET 710 #define CONFIG_MII /* MII PHY management */ 711 #define CONFIG_ETHPRIME "FM1@DTSEC1" 712 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 713 #endif 714 715 /* 716 * Environment 717 */ 718 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 719 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 720 721 /* 722 * Command line configuration. 723 */ 724 #include <config_cmd_default.h> 725 726 #define CONFIG_CMD_DHCP 727 #define CONFIG_CMD_ELF 728 #define CONFIG_CMD_ERRATA 729 #define CONFIG_CMD_GREPENV 730 #define CONFIG_CMD_IRQ 731 #define CONFIG_CMD_I2C 732 #define CONFIG_CMD_MII 733 #define CONFIG_CMD_PING 734 #define CONFIG_CMD_SETEXPR 735 736 #ifdef CONFIG_PCI 737 #define CONFIG_CMD_PCI 738 #define CONFIG_CMD_NET 739 #endif 740 741 /* 742 * USB 743 */ 744 #define CONFIG_CMD_USB 745 #define CONFIG_USB_STORAGE 746 #define CONFIG_USB_EHCI 747 #define CONFIG_USB_EHCI_FSL 748 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 749 #define CONFIG_CMD_EXT2 750 #define CONFIG_HAS_FSL_DR_USB 751 752 #define CONFIG_MMC 753 754 #ifdef CONFIG_MMC 755 #define CONFIG_FSL_ESDHC 756 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 757 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT 758 #define CONFIG_CMD_MMC 759 #define CONFIG_GENERIC_MMC 760 #define CONFIG_CMD_EXT2 761 #define CONFIG_CMD_FAT 762 #define CONFIG_DOS_PARTITION 763 #endif 764 765 /* 766 * Miscellaneous configurable options 767 */ 768 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 769 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 770 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 771 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 772 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 773 #ifdef CONFIG_CMD_KGDB 774 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 775 #else 776 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 777 #endif 778 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 779 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 780 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ 781 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks*/ 782 783 /* 784 * For booting Linux, the board info and command line data 785 * have to be in the first 64 MB of memory, since this is 786 * the maximum mapped by the Linux kernel during initialization. 787 */ 788 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ 789 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 790 791 #ifdef CONFIG_CMD_KGDB 792 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 793 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 794 #endif 795 796 /* 797 * Environment Configuration 798 */ 799 #define CONFIG_ROOTPATH "/opt/nfsroot" 800 #define CONFIG_BOOTFILE "uImage" 801 #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ 802 803 /* default location for tftp and bootm */ 804 #define CONFIG_LOADADDR 1000000 805 806 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 807 808 #define CONFIG_BAUDRATE 115200 809 810 #define __USB_PHY_TYPE utmi 811 812 /* 813 * T4240 has 3 DDR controllers. Default to 3way_4KB interleaving. It can be 814 * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 815 * cacheline interleaving. It can be cacheline, page, bank, superbank. 816 * See doc/README.fsl-ddr for details. 817 */ 818 #ifdef CONFIG_PPC_T4240 819 #define CTRL_INTLV_PREFERED 3way_4KB 820 #else 821 #define CTRL_INTLV_PREFERED cacheline 822 #endif 823 824 #define CONFIG_EXTRA_ENV_SETTINGS \ 825 "hwconfig=fsl_ddr:" \ 826 "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \ 827 "bank_intlv=auto;" \ 828 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ 829 "netdev=eth0\0" \ 830 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 831 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 832 "tftpflash=tftpboot $loadaddr $uboot && " \ 833 "protect off $ubootaddr +$filesize && " \ 834 "erase $ubootaddr +$filesize && " \ 835 "cp.b $loadaddr $ubootaddr $filesize && " \ 836 "protect on $ubootaddr +$filesize && " \ 837 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 838 "consoledev=ttyS0\0" \ 839 "ramdiskaddr=2000000\0" \ 840 "ramdiskfile=t4240qds/ramdisk.uboot\0" \ 841 "fdtaddr=c00000\0" \ 842 "fdtfile=t4240qds/t4240qds.dtb\0" \ 843 "bdev=sda3\0" \ 844 "c=ffe\0" 845 846 /* For emulation this causes u-boot to jump to the start of the proof point 847 app code automatically */ 848 #define CONFIG_PROOF_POINTS \ 849 "setenv bootargs root=/dev/$bdev rw " \ 850 "console=$consoledev,$baudrate $othbootargs;" \ 851 "cpu 1 release 0x29000000 - - -;" \ 852 "cpu 2 release 0x29000000 - - -;" \ 853 "cpu 3 release 0x29000000 - - -;" \ 854 "cpu 4 release 0x29000000 - - -;" \ 855 "cpu 5 release 0x29000000 - - -;" \ 856 "cpu 6 release 0x29000000 - - -;" \ 857 "cpu 7 release 0x29000000 - - -;" \ 858 "go 0x29000000" 859 860 #define CONFIG_HVBOOT \ 861 "setenv bootargs config-addr=0x60000000; " \ 862 "bootm 0x01000000 - 0x00f00000" 863 864 #define CONFIG_ALU \ 865 "setenv bootargs root=/dev/$bdev rw " \ 866 "console=$consoledev,$baudrate $othbootargs;" \ 867 "cpu 1 release 0x01000000 - - -;" \ 868 "cpu 2 release 0x01000000 - - -;" \ 869 "cpu 3 release 0x01000000 - - -;" \ 870 "cpu 4 release 0x01000000 - - -;" \ 871 "cpu 5 release 0x01000000 - - -;" \ 872 "cpu 6 release 0x01000000 - - -;" \ 873 "cpu 7 release 0x01000000 - - -;" \ 874 "go 0x01000000" 875 876 #define CONFIG_LINUX \ 877 "setenv bootargs root=/dev/ram rw " \ 878 "console=$consoledev,$baudrate $othbootargs;" \ 879 "setenv ramdiskaddr 0x02000000;" \ 880 "setenv fdtaddr 0x00c00000;" \ 881 "setenv loadaddr 0x1000000;" \ 882 "bootm $loadaddr $ramdiskaddr $fdtaddr" 883 884 #define CONFIG_HDBOOT \ 885 "setenv bootargs root=/dev/$bdev rw " \ 886 "console=$consoledev,$baudrate $othbootargs;" \ 887 "tftp $loadaddr $bootfile;" \ 888 "tftp $fdtaddr $fdtfile;" \ 889 "bootm $loadaddr - $fdtaddr" 890 891 #define CONFIG_NFSBOOTCOMMAND \ 892 "setenv bootargs root=/dev/nfs rw " \ 893 "nfsroot=$serverip:$rootpath " \ 894 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 895 "console=$consoledev,$baudrate $othbootargs;" \ 896 "tftp $loadaddr $bootfile;" \ 897 "tftp $fdtaddr $fdtfile;" \ 898 "bootm $loadaddr - $fdtaddr" 899 900 #define CONFIG_RAMBOOTCOMMAND \ 901 "setenv bootargs root=/dev/ram rw " \ 902 "console=$consoledev,$baudrate $othbootargs;" \ 903 "tftp $ramdiskaddr $ramdiskfile;" \ 904 "tftp $loadaddr $bootfile;" \ 905 "tftp $fdtaddr $fdtfile;" \ 906 "bootm $loadaddr $ramdiskaddr $fdtaddr" 907 908 #define CONFIG_BOOTCOMMAND CONFIG_LINUX 909 910 #ifdef CONFIG_SECURE_BOOT 911 #include <asm/fsl_secure_boot.h> 912 #endif 913 914 #endif /* __CONFIG_H */ 915