1 /* 2 * Copyright 2011-2012 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * Corenet DS style board configuration file 9 */ 10 #ifndef __T4QDS_H 11 #define __T4QDS_H 12 13 #define CONFIG_CMD_REGINFO 14 15 /* High Level Configuration Options */ 16 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 17 #define CONFIG_MP /* support multiple processors */ 18 19 #ifndef CONFIG_SYS_TEXT_BASE 20 #define CONFIG_SYS_TEXT_BASE 0xeff40000 21 #endif 22 23 #ifndef CONFIG_RESET_VECTOR_ADDRESS 24 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 25 #endif 26 27 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 28 #define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS 29 #define CONFIG_PCIE1 /* PCIE controller 1 */ 30 #define CONFIG_PCIE2 /* PCIE controller 2 */ 31 #define CONFIG_PCIE3 /* PCIE controller 3 */ 32 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 33 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 34 35 #define CONFIG_SYS_SRIO 36 #define CONFIG_SRIO1 /* SRIO port 1 */ 37 #define CONFIG_SRIO2 /* SRIO port 2 */ 38 39 #define CONFIG_ENV_OVERWRITE 40 41 /* 42 * These can be toggled for performance analysis, otherwise use default. 43 */ 44 #define CONFIG_SYS_CACHE_STASHING 45 #define CONFIG_BTB /* toggle branch predition */ 46 #ifdef CONFIG_DDR_ECC 47 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 48 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 49 #endif 50 51 #define CONFIG_ENABLE_36BIT_PHYS 52 53 #define CONFIG_ADDR_MAP 54 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 55 56 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 57 #define CONFIG_SYS_MEMTEST_END 0x00400000 58 #define CONFIG_SYS_ALT_MEMTEST 59 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 60 61 /* 62 * Config the L3 Cache as L3 SRAM 63 */ 64 #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 65 #define CONFIG_SYS_L3_SIZE (512 << 10) 66 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024) 67 #ifdef CONFIG_RAMBOOT_PBL 68 #define CONFIG_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) 69 #endif 70 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024) 71 #define CONFIG_SPL_RELOC_MALLOC_SIZE (50 << 10) 72 #define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024) 73 #define CONFIG_SPL_RELOC_STACK_SIZE (22 << 10) 74 75 #define CONFIG_SYS_DCSRBAR 0xf0000000 76 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 77 78 /* 79 * DDR Setup 80 */ 81 #define CONFIG_VERY_BIG_RAM 82 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 83 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 84 85 #define CONFIG_DIMM_SLOTS_PER_CTLR 2 86 #define CONFIG_CHIP_SELECTS_PER_CTRL 4 87 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE 88 89 #define CONFIG_DDR_SPD 90 91 /* 92 * IFC Definitions 93 */ 94 #define CONFIG_SYS_FLASH_BASE 0xe0000000 95 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 96 97 #ifdef CONFIG_SPL_BUILD 98 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 99 #else 100 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 101 #endif 102 103 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ 104 #define CONFIG_MISC_INIT_R 105 106 #define CONFIG_HWCONFIG 107 108 /* define to use L1 as initial stack */ 109 #define CONFIG_L1_INIT_RAM 110 #define CONFIG_SYS_INIT_RAM_LOCK 111 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ 112 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 113 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 114 /* The assembler doesn't like typecast */ 115 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 116 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 117 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 118 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 119 120 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 121 GENERATED_GBL_DATA_SIZE) 122 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 123 124 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 125 #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) 126 127 /* Serial Port - controlled on board with jumper J8 128 * open - index 2 129 * shorted - index 1 130 */ 131 #define CONFIG_CONS_INDEX 1 132 #define CONFIG_SYS_NS16550_SERIAL 133 #define CONFIG_SYS_NS16550_REG_SIZE 1 134 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 135 136 #define CONFIG_SYS_BAUDRATE_TABLE \ 137 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 138 139 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 140 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 141 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 142 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 143 144 /* I2C */ 145 #define CONFIG_SYS_I2C 146 #define CONFIG_SYS_I2C_FSL 147 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 148 #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 149 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 150 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 151 152 /* 153 * RapidIO 154 */ 155 #define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000 156 #define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull 157 #define CONFIG_SYS_SRIO1_MEM_SIZE 0x10000000 /* 256M */ 158 159 #define CONFIG_SYS_SRIO2_MEM_VIRT 0xb0000000 160 #define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull 161 #define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */ 162 163 /* 164 * General PCI 165 * Memory space is mapped 1-1, but I/O space must start from 0. 166 */ 167 168 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 169 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 170 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 171 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 172 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 173 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 174 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 175 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 176 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 177 178 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 179 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 180 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 181 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 182 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 183 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 184 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 185 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 186 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 187 188 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 189 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 190 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 191 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull 192 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ 193 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 194 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 195 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 196 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 197 198 /* controller 4, Base address 203000 */ 199 #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 200 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc60000000ull 201 #define CONFIG_SYS_PCIE4_MEM_SIZE 0x20000000 /* 512M */ 202 #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 203 #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull 204 #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ 205 206 #ifdef CONFIG_PCI 207 #define CONFIG_PCI_INDIRECT_BRIDGE 208 209 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 210 #endif /* CONFIG_PCI */ 211 212 /* SATA */ 213 #ifdef CONFIG_FSL_SATA_V2 214 #define CONFIG_LIBATA 215 #define CONFIG_FSL_SATA 216 217 #define CONFIG_SYS_SATA_MAX_DEVICE 2 218 #define CONFIG_SATA1 219 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 220 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 221 #define CONFIG_SATA2 222 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 223 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 224 225 #define CONFIG_LBA48 226 #define CONFIG_CMD_SATA 227 #endif 228 229 #ifdef CONFIG_FMAN_ENET 230 #define CONFIG_MII /* MII PHY management */ 231 #define CONFIG_ETHPRIME "FM1@DTSEC1" 232 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 233 #endif 234 235 /* 236 * Environment 237 */ 238 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 239 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 240 241 /* 242 * Command line configuration. 243 */ 244 #define CONFIG_CMD_ERRATA 245 #define CONFIG_CMD_IRQ 246 247 #ifdef CONFIG_PCI 248 #define CONFIG_CMD_PCI 249 #endif 250 251 /* 252 * Miscellaneous configurable options 253 */ 254 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 255 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 256 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 257 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 258 #ifdef CONFIG_CMD_KGDB 259 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 260 #else 261 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 262 #endif 263 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 264 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 265 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ 266 267 /* 268 * For booting Linux, the board info and command line data 269 * have to be in the first 64 MB of memory, since this is 270 * the maximum mapped by the Linux kernel during initialization. 271 */ 272 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ 273 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 274 275 #ifdef CONFIG_CMD_KGDB 276 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 277 #endif 278 279 /* 280 * Environment Configuration 281 */ 282 #define CONFIG_ROOTPATH "/opt/nfsroot" 283 #define CONFIG_BOOTFILE "uImage" 284 #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ 285 286 /* default location for tftp and bootm */ 287 #define CONFIG_LOADADDR 1000000 288 289 #define CONFIG_BAUDRATE 115200 290 291 #define CONFIG_HVBOOT \ 292 "setenv bootargs config-addr=0x60000000; " \ 293 "bootm 0x01000000 - 0x00f00000" 294 295 #endif /* __CONFIG_H */ 296