1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net>
4  *
5  * (C) Copyright 2007-2011
6  * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
7  * Tom Cubie <tangliang@allwinnertech.com>
8  *
9  * Configuration settings for the Allwinner sunxi series of boards.
10  */
11 
12 #ifndef _SUNXI_COMMON_CONFIG_H
13 #define _SUNXI_COMMON_CONFIG_H
14 
15 #include <asm/arch/cpu.h>
16 #include <linux/stringify.h>
17 
18 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
19 /*
20  * The U-Boot workarounds bugs in the outdated buggy sunxi-3.4 kernels at the
21  * expense of restricting some features, so the regular machine id values can
22  * be used.
23  */
24 # define CONFIG_MACH_TYPE_COMPAT_REV	0
25 #else
26 /*
27  * A compatibility guard to prevent loading outdated buggy sunxi-3.4 kernels.
28  * Only sunxi-3.4 kernels with appropriate fixes applied are able to pass
29  * beyond the machine id check.
30  */
31 # define CONFIG_MACH_TYPE_COMPAT_REV	1
32 #endif
33 
34 #ifdef CONFIG_ARM64
35 #define CONFIG_BUILD_TARGET "u-boot.itb"
36 #define CONFIG_SYS_BOOTM_LEN		(32 << 20)
37 #endif
38 
39 /* Serial & console */
40 #define CONFIG_SYS_NS16550_SERIAL
41 /* ns16550 reg in the low bits of cpu reg */
42 #define CONFIG_SYS_NS16550_CLK		24000000
43 #ifndef CONFIG_DM_SERIAL
44 # define CONFIG_SYS_NS16550_REG_SIZE	-4
45 # define CONFIG_SYS_NS16550_COM1		SUNXI_UART0_BASE
46 # define CONFIG_SYS_NS16550_COM2		SUNXI_UART1_BASE
47 # define CONFIG_SYS_NS16550_COM3		SUNXI_UART2_BASE
48 # define CONFIG_SYS_NS16550_COM4		SUNXI_UART3_BASE
49 # define CONFIG_SYS_NS16550_COM5		SUNXI_R_UART_BASE
50 #endif
51 
52 /* CPU */
53 #define COUNTER_FREQUENCY		24000000
54 
55 /*
56  * The DRAM Base differs between some models. We cannot use macros for the
57  * CONFIG_FOO defines which contain the DRAM base address since they end
58  * up unexpanded in include/autoconf.mk .
59  *
60  * So we have to have this #ifdef #else #endif block for these.
61  */
62 #ifdef CONFIG_MACH_SUN9I
63 #define SDRAM_OFFSET(x) 0x2##x
64 #define CONFIG_SYS_SDRAM_BASE		0x20000000
65 #define CONFIG_SYS_LOAD_ADDR		0x22000000 /* default load address */
66 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
67  * since it needs to fit in with the other values. By also #defining it
68  * we get warnings if the Kconfig value mismatches. */
69 #define CONFIG_SPL_STACK_R_ADDR		0x2fe00000
70 #define CONFIG_SPL_BSS_START_ADDR	0x2ff80000
71 #else
72 #define SDRAM_OFFSET(x) 0x4##x
73 #define CONFIG_SYS_SDRAM_BASE		0x40000000
74 #define CONFIG_SYS_LOAD_ADDR		0x42000000 /* default load address */
75 /* V3s do not have enough memory to place code at 0x4a000000 */
76 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
77  * since it needs to fit in with the other values. By also #defining it
78  * we get warnings if the Kconfig value mismatches. */
79 #define CONFIG_SPL_STACK_R_ADDR		0x4fe00000
80 #define CONFIG_SPL_BSS_START_ADDR	0x4ff80000
81 #endif
82 
83 #define CONFIG_SPL_BSS_MAX_SIZE		0x00080000 /* 512 KiB */
84 
85 #ifdef CONFIG_SUNXI_HIGH_SRAM
86 /*
87  * The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is
88  * slightly bigger. Note that it is possible to map the first 32 KiB of the
89  * A1 at 0x00000000 like with older SoCs by writing 0x16aa0001 to the
90  * undocumented 0x008000e0 SYS_CTRL register. Where the 16aa is a key and
91  * the 1 actually activates the mapping of the first 32 KiB to 0x00000000.
92  */
93 #define CONFIG_SYS_INIT_RAM_ADDR	0x10000
94 #define CONFIG_SYS_INIT_RAM_SIZE	0x08000	/* FIXME: 40 KiB ? */
95 #else
96 #define CONFIG_SYS_INIT_RAM_ADDR	0x0
97 #define CONFIG_SYS_INIT_RAM_SIZE	0x8000	/* 32 KiB */
98 #endif
99 
100 #define CONFIG_SYS_INIT_SP_OFFSET \
101 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
102 #define CONFIG_SYS_INIT_SP_ADDR \
103 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
104 
105 #define CONFIG_NR_DRAM_BANKS		1
106 #define PHYS_SDRAM_0			CONFIG_SYS_SDRAM_BASE
107 #define PHYS_SDRAM_0_SIZE		0x80000000 /* 2 GiB */
108 
109 #ifdef CONFIG_AHCI
110 #define CONFIG_SCSI_AHCI_PLAT
111 #define CONFIG_SUNXI_AHCI
112 #define CONFIG_SYS_64BIT_LBA
113 #define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
114 #define CONFIG_SYS_SCSI_MAX_LUN		1
115 #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
116 					 CONFIG_SYS_SCSI_MAX_LUN)
117 #endif
118 
119 #define CONFIG_SETUP_MEMORY_TAGS
120 #define CONFIG_CMDLINE_TAG
121 #define CONFIG_INITRD_TAG
122 #define CONFIG_SERIAL_TAG
123 
124 #ifdef CONFIG_NAND_SUNXI
125 #define CONFIG_SYS_NAND_MAX_ECCPOS 1664
126 #define CONFIG_SYS_NAND_ONFI_DETECTION
127 #define CONFIG_SYS_MAX_NAND_DEVICE 8
128 
129 #define CONFIG_MTD_DEVICE
130 #define CONFIG_MTD_PARTITIONS
131 #endif
132 
133 #ifdef CONFIG_SPL_SPI_SUNXI
134 #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x8000
135 #endif
136 
137 /* mmc config */
138 #ifdef CONFIG_MMC
139 #define CONFIG_MMC_SUNXI_SLOT		0
140 #endif
141 
142 #if defined(CONFIG_ENV_IS_IN_MMC)
143 
144 #ifdef CONFIG_ARM64
145 /*
146  * This is actually (CONFIG_ENV_OFFSET -
147  * (CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)), but the value will be used
148  * directly in a makefile, without the preprocessor expansion.
149  */
150 #define CONFIG_BOARD_SIZE_LIMIT		0x7e000
151 #endif
152 
153 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1
154 /* If we have two devices (most likely eMMC + MMC), favour the eMMC */
155 #define CONFIG_SYS_MMC_ENV_DEV		1
156 #else
157 /* Otherwise, use the only device we have */
158 #define CONFIG_SYS_MMC_ENV_DEV		0
159 #endif
160 #define CONFIG_SYS_MMC_MAX_DEVICE	4
161 #elif defined(CONFIG_ENV_IS_NOWHERE)
162 #define CONFIG_ENV_SIZE			(128 << 10)
163 #endif
164 
165 #ifndef CONFIG_MACH_SUN8I_V3S
166 /* 64MB of malloc() pool */
167 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (64 << 20))
168 #else
169 /* 2MB of malloc() pool */
170 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (2 << 20))
171 #endif
172 
173 /*
174  * Miscellaneous configurable options
175  */
176 #define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size */
177 #define CONFIG_SYS_PBSIZE	1024	/* Print Buffer Size */
178 
179 /* standalone support */
180 #define CONFIG_STANDALONE_LOAD_ADDR	CONFIG_SYS_LOAD_ADDR
181 
182 /* FLASH and environment organization */
183 
184 #define CONFIG_SYS_MONITOR_LEN		(768 << 10)	/* 768 KiB */
185 
186 #ifndef CONFIG_ARM64		/* AArch64 FEL support is not ready yet */
187 #define CONFIG_SPL_BOARD_LOAD_IMAGE
188 #endif
189 
190 #ifdef CONFIG_SUNXI_HIGH_SRAM
191 #define CONFIG_SPL_TEXT_BASE		0x10060		/* sram start+header */
192 #define CONFIG_SPL_MAX_SIZE		0x7fa0		/* 32 KiB */
193 #ifdef CONFIG_ARM64
194 /* end of SRAM A2 for now, as SRAM A1 is pretty tight for an ARM64 build */
195 #define LOW_LEVEL_SRAM_STACK		0x00054000
196 #else
197 #define LOW_LEVEL_SRAM_STACK		0x00018000
198 #endif /* !CONFIG_ARM64 */
199 #else
200 #define CONFIG_SPL_TEXT_BASE		0x60		/* sram start+header */
201 #define CONFIG_SPL_MAX_SIZE		0x5fa0		/* 24KB on sun4i/sun7i */
202 #define LOW_LEVEL_SRAM_STACK		0x00008000	/* End of sram */
203 #endif
204 
205 #define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
206 
207 #define CONFIG_SPL_PAD_TO		32768		/* decimal for 'dd' */
208 
209 
210 /* I2C */
211 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
212     defined CONFIG_SY8106A_POWER
213 #endif
214 
215 #if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \
216     defined CONFIG_I2C2_ENABLE || defined CONFIG_I2C3_ENABLE || \
217     defined CONFIG_I2C4_ENABLE || defined CONFIG_R_I2C_ENABLE
218 #define CONFIG_SYS_I2C_MVTWSI
219 #ifndef CONFIG_DM_I2C
220 #define CONFIG_SYS_I2C
221 #define CONFIG_SYS_I2C_SPEED		400000
222 #define CONFIG_SYS_I2C_SLAVE		0x7f
223 #endif
224 #endif
225 
226 #if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
227 #define CONFIG_SYS_I2C_SOFT
228 #define CONFIG_SYS_I2C_SOFT_SPEED	50000
229 #define CONFIG_SYS_I2C_SOFT_SLAVE	0x00
230 /* We use pin names in Kconfig and sunxi_name_to_gpio() */
231 #define CONFIG_SOFT_I2C_GPIO_SDA	soft_i2c_gpio_sda
232 #define CONFIG_SOFT_I2C_GPIO_SCL	soft_i2c_gpio_scl
233 #ifndef __ASSEMBLY__
234 extern int soft_i2c_gpio_sda;
235 extern int soft_i2c_gpio_scl;
236 #endif
237 #define CONFIG_VIDEO_LCD_I2C_BUS	0 /* The lcd panel soft i2c is bus 0 */
238 #define CONFIG_SYS_SPD_BUS_NUM		1 /* And the axp209 i2c bus is bus 1 */
239 #else
240 #define CONFIG_SYS_SPD_BUS_NUM		0 /* The axp209 i2c bus is bus 0 */
241 #define CONFIG_VIDEO_LCD_I2C_BUS	-1 /* NA, but necessary to compile */
242 #endif
243 
244 /* PMU */
245 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
246     defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER || \
247     defined CONFIG_SY8106A_POWER
248 #endif
249 
250 #ifdef CONFIG_REQUIRE_SERIAL_CONSOLE
251 #if CONFIG_CONS_INDEX == 1
252 #ifdef CONFIG_MACH_SUN9I
253 #define OF_STDOUT_PATH		"/soc/serial@07000000:115200"
254 #else
255 #define OF_STDOUT_PATH		"/soc@01c00000/serial@01c28000:115200"
256 #endif
257 #elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I)
258 #define OF_STDOUT_PATH		"/soc@01c00000/serial@01c28400:115200"
259 #elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I)
260 #define OF_STDOUT_PATH		"/soc@01c00000/serial@01c28800:115200"
261 #elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I)
262 #define OF_STDOUT_PATH		"/soc@01c00000/serial@01f02800:115200"
263 #else
264 #error Unsupported console port nr. Please fix stdout-path in sunxi-common.h.
265 #endif
266 #endif /* ifdef CONFIG_REQUIRE_SERIAL_CONSOLE */
267 
268 /* GPIO */
269 #define CONFIG_SUNXI_GPIO
270 
271 #ifdef CONFIG_VIDEO_SUNXI
272 /*
273  * The amount of RAM to keep free at the top of RAM when relocating u-boot,
274  * to use as framebuffer. This must be a multiple of 4096.
275  */
276 #define CONFIG_SUNXI_MAX_FB_SIZE (16 << 20)
277 
278 #define CONFIG_VIDEO_LOGO
279 #define CONFIG_VIDEO_STD_TIMINGS
280 #define CONFIG_I2C_EDID
281 #define VIDEO_LINE_LEN (pGD->plnSizeX)
282 
283 /* allow both serial and cfb console. */
284 /* stop x86 thinking in cfbconsole from trying to init a pc keyboard */
285 
286 #endif /* CONFIG_VIDEO_SUNXI */
287 
288 /* Ethernet support */
289 #ifdef CONFIG_SUN4I_EMAC
290 #define CONFIG_MII			/* MII PHY management		*/
291 #endif
292 
293 #ifdef CONFIG_SUN7I_GMAC
294 #define CONFIG_MII			/* MII PHY management		*/
295 #define CONFIG_PHY_REALTEK
296 #endif
297 
298 #ifdef CONFIG_USB_EHCI_HCD
299 #define CONFIG_USB_OHCI_NEW
300 #define CONFIG_USB_OHCI_SUNXI
301 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
302 #endif
303 
304 #ifdef CONFIG_USB_FUNCTION_MASS_STORAGE
305 #endif
306 
307 #ifdef CONFIG_USB_KEYBOARD
308 #define CONFIG_PREBOOT
309 #endif
310 
311 #define CONFIG_MISC_INIT_R
312 
313 #ifndef CONFIG_SPL_BUILD
314 
315 #ifdef CONFIG_ARM64
316 /*
317  * Boards seem to come with at least 512MB of DRAM.
318  * The kernel should go at 512K, which is the default text offset (that will
319  * be adjusted at runtime if needed).
320  * There is no compression for arm64 kernels (yet), so leave some space
321  * for really big kernels, say 256MB for now.
322  * Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd.
323  * Align the initrd to a 2MB page.
324  */
325 #define BOOTM_SIZE	__stringify(0xa000000)
326 #define KERNEL_ADDR_R	__stringify(SDRAM_OFFSET(0080000))
327 #define FDT_ADDR_R	__stringify(SDRAM_OFFSET(FA00000))
328 #define SCRIPT_ADDR_R	__stringify(SDRAM_OFFSET(FC00000))
329 #define PXEFILE_ADDR_R	__stringify(SDRAM_OFFSET(FD00000))
330 #define RAMDISK_ADDR_R	__stringify(SDRAM_OFFSET(FE00000))
331 
332 #else
333 /*
334  * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc.
335  * 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
336  * 1M script, 1M pxe and the ramdisk at the end.
337  */
338 #ifndef CONFIG_MACH_SUN8I_V3S
339 #define BOOTM_SIZE     __stringify(0xa000000)
340 #define KERNEL_ADDR_R  __stringify(SDRAM_OFFSET(2000000))
341 #define FDT_ADDR_R     __stringify(SDRAM_OFFSET(3000000))
342 #define SCRIPT_ADDR_R  __stringify(SDRAM_OFFSET(3100000))
343 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000))
344 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3300000))
345 #else
346 /*
347  * 64M RAM minus 2MB heap + 16MB for u-boot, stack, fb, etc.
348  * 16M uncompressed kernel, 8M compressed kernel, 1M fdt,
349  * 1M script, 1M pxe and the ramdisk at the end.
350  */
351 #define BOOTM_SIZE     __stringify(0x2e00000)
352 #define KERNEL_ADDR_R  __stringify(SDRAM_OFFSET(1000000))
353 #define FDT_ADDR_R     __stringify(SDRAM_OFFSET(1800000))
354 #define SCRIPT_ADDR_R  __stringify(SDRAM_OFFSET(1900000))
355 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(1A00000))
356 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(1B00000))
357 #endif
358 #endif
359 
360 #define MEM_LAYOUT_ENV_SETTINGS \
361 	"bootm_size=" BOOTM_SIZE "\0" \
362 	"kernel_addr_r=" KERNEL_ADDR_R "\0" \
363 	"fdt_addr_r=" FDT_ADDR_R "\0" \
364 	"scriptaddr=" SCRIPT_ADDR_R "\0" \
365 	"pxefile_addr_r=" PXEFILE_ADDR_R "\0" \
366 	"ramdisk_addr_r=" RAMDISK_ADDR_R "\0"
367 
368 #define DFU_ALT_INFO_RAM \
369 	"dfu_alt_info_ram=" \
370 	"kernel ram " KERNEL_ADDR_R " 0x1000000;" \
371 	"fdt ram " FDT_ADDR_R " 0x100000;" \
372 	"ramdisk ram " RAMDISK_ADDR_R " 0x4000000\0"
373 
374 #ifdef CONFIG_MMC
375 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1
376 #define BOOTENV_DEV_MMC_AUTO(devtypeu, devtypel, instance)		\
377 	BOOTENV_DEV_MMC(MMC, mmc, 0)					\
378 	BOOTENV_DEV_MMC(MMC, mmc, 1)					\
379 	"bootcmd_mmc_auto="						\
380 		"if test ${mmc_bootdev} -eq 1; then "			\
381 			"run bootcmd_mmc1; "				\
382 			"run bootcmd_mmc0; "				\
383 		"elif test ${mmc_bootdev} -eq 0; then "			\
384 			"run bootcmd_mmc0; "				\
385 			"run bootcmd_mmc1; "				\
386 		"fi\0"
387 
388 #define BOOTENV_DEV_NAME_MMC_AUTO(devtypeu, devtypel, instance) \
389 	"mmc_auto "
390 
391 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC_AUTO, mmc_auto, na)
392 #else
393 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
394 #endif
395 #else
396 #define BOOT_TARGET_DEVICES_MMC(func)
397 #endif
398 
399 #ifdef CONFIG_AHCI
400 #define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
401 #else
402 #define BOOT_TARGET_DEVICES_SCSI(func)
403 #endif
404 
405 #ifdef CONFIG_USB_STORAGE
406 #define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0)
407 #else
408 #define BOOT_TARGET_DEVICES_USB(func)
409 #endif
410 
411 /* FEL boot support, auto-execute boot.scr if a script address was provided */
412 #define BOOTENV_DEV_FEL(devtypeu, devtypel, instance) \
413 	"bootcmd_fel=" \
414 		"if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then " \
415 			"echo '(FEL boot)'; " \
416 			"source ${fel_scriptaddr}; " \
417 		"fi\0"
418 #define BOOTENV_DEV_NAME_FEL(devtypeu, devtypel, instance) \
419 	"fel "
420 
421 #define BOOT_TARGET_DEVICES(func) \
422 	func(FEL, fel, na) \
423 	BOOT_TARGET_DEVICES_MMC(func) \
424 	BOOT_TARGET_DEVICES_SCSI(func) \
425 	BOOT_TARGET_DEVICES_USB(func) \
426 	func(PXE, pxe, na) \
427 	func(DHCP, dhcp, na)
428 
429 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
430 #define BOOTCMD_SUNXI_COMPAT \
431 	"bootcmd_sunxi_compat=" \
432 		"setenv root /dev/mmcblk0p3 rootwait; " \
433 		"if ext2load mmc 0 0x44000000 uEnv.txt; then " \
434 			"echo Loaded environment from uEnv.txt; " \
435 			"env import -t 0x44000000 ${filesize}; " \
436 		"fi; " \
437 		"setenv bootargs console=${console} root=${root} ${extraargs}; " \
438 		"ext2load mmc 0 0x43000000 script.bin && " \
439 		"ext2load mmc 0 0x48000000 uImage && " \
440 		"bootm 0x48000000\0"
441 #else
442 #define BOOTCMD_SUNXI_COMPAT
443 #endif
444 
445 #include <config_distro_bootcmd.h>
446 
447 #ifdef CONFIG_USB_KEYBOARD
448 #define CONSOLE_STDIN_SETTINGS \
449 	"preboot=usb start\0" \
450 	"stdin=serial,usbkbd\0"
451 #else
452 #define CONSOLE_STDIN_SETTINGS \
453 	"stdin=serial\0"
454 #endif
455 
456 #ifdef CONFIG_VIDEO
457 #define CONSOLE_STDOUT_SETTINGS \
458 	"stdout=serial,vga\0" \
459 	"stderr=serial,vga\0"
460 #elif CONFIG_DM_VIDEO
461 #define CONFIG_SYS_WHITE_ON_BLACK
462 #define CONSOLE_STDOUT_SETTINGS \
463 	"stdout=serial,vidconsole\0" \
464 	"stderr=serial,vidconsole\0"
465 #else
466 #define CONSOLE_STDOUT_SETTINGS \
467 	"stdout=serial\0" \
468 	"stderr=serial\0"
469 #endif
470 
471 #ifdef CONFIG_MTDIDS_DEFAULT
472 #define SUNXI_MTDIDS_DEFAULT \
473 	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0"
474 #else
475 #define SUNXI_MTDIDS_DEFAULT
476 #endif
477 
478 #ifdef CONFIG_MTDPARTS_DEFAULT
479 #define SUNXI_MTDPARTS_DEFAULT \
480 	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"
481 #else
482 #define SUNXI_MTDPARTS_DEFAULT
483 #endif
484 
485 #define PARTS_DEFAULT \
486 	"name=loader1,start=8k,size=32k,uuid=${uuid_gpt_loader1};" \
487 	"name=loader2,size=984k,uuid=${uuid_gpt_loader2};" \
488 	"name=esp,size=128M,bootable,uuid=${uuid_gpt_esp};" \
489 	"name=system,size=-,uuid=${uuid_gpt_system};"
490 
491 #define UUID_GPT_ESP "c12a7328-f81f-11d2-ba4b-00a0c93ec93b"
492 
493 #ifdef CONFIG_ARM64
494 #define UUID_GPT_SYSTEM "b921b045-1df0-41c3-af44-4c6f280d3fae"
495 #else
496 #define UUID_GPT_SYSTEM "69dad710-2ce4-4e3c-b16c-21a1d49abed3"
497 #endif
498 
499 #define CONSOLE_ENV_SETTINGS \
500 	CONSOLE_STDIN_SETTINGS \
501 	CONSOLE_STDOUT_SETTINGS
502 
503 #ifdef CONFIG_ARM64
504 #define FDTFILE "allwinner/" CONFIG_DEFAULT_DEVICE_TREE ".dtb"
505 #else
506 #define FDTFILE CONFIG_DEFAULT_DEVICE_TREE ".dtb"
507 #endif
508 
509 #define CONFIG_EXTRA_ENV_SETTINGS \
510 	CONSOLE_ENV_SETTINGS \
511 	MEM_LAYOUT_ENV_SETTINGS \
512 	DFU_ALT_INFO_RAM \
513 	"fdtfile=" FDTFILE "\0" \
514 	"console=ttyS0,115200\0" \
515 	SUNXI_MTDIDS_DEFAULT \
516 	SUNXI_MTDPARTS_DEFAULT \
517 	"uuid_gpt_esp=" UUID_GPT_ESP "\0" \
518 	"uuid_gpt_system=" UUID_GPT_SYSTEM "\0" \
519 	"partitions=" PARTS_DEFAULT "\0" \
520 	BOOTCMD_SUNXI_COMPAT \
521 	BOOTENV
522 
523 #else /* ifndef CONFIG_SPL_BUILD */
524 #define CONFIG_EXTRA_ENV_SETTINGS
525 #endif
526 
527 #endif /* _SUNXI_COMMON_CONFIG_H */
528