1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net> 4 * 5 * (C) Copyright 2007-2011 6 * Allwinner Technology Co., Ltd. <www.allwinnertech.com> 7 * Tom Cubie <tangliang@allwinnertech.com> 8 * 9 * Configuration settings for the Allwinner sunxi series of boards. 10 */ 11 12 #ifndef _SUNXI_COMMON_CONFIG_H 13 #define _SUNXI_COMMON_CONFIG_H 14 15 #include <asm/arch/cpu.h> 16 #include <linux/stringify.h> 17 18 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT 19 /* 20 * The U-Boot workarounds bugs in the outdated buggy sunxi-3.4 kernels at the 21 * expense of restricting some features, so the regular machine id values can 22 * be used. 23 */ 24 # define CONFIG_MACH_TYPE_COMPAT_REV 0 25 #else 26 /* 27 * A compatibility guard to prevent loading outdated buggy sunxi-3.4 kernels. 28 * Only sunxi-3.4 kernels with appropriate fixes applied are able to pass 29 * beyond the machine id check. 30 */ 31 # define CONFIG_MACH_TYPE_COMPAT_REV 1 32 #endif 33 34 #ifdef CONFIG_ARM64 35 #define CONFIG_BUILD_TARGET "u-boot.itb" 36 #define CONFIG_SYS_BOOTM_LEN (32 << 20) 37 #endif 38 39 /* Serial & console */ 40 #define CONFIG_SYS_NS16550_SERIAL 41 /* ns16550 reg in the low bits of cpu reg */ 42 #define CONFIG_SYS_NS16550_CLK 24000000 43 #ifndef CONFIG_DM_SERIAL 44 # define CONFIG_SYS_NS16550_REG_SIZE -4 45 # define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE 46 # define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE 47 # define CONFIG_SYS_NS16550_COM3 SUNXI_UART2_BASE 48 # define CONFIG_SYS_NS16550_COM4 SUNXI_UART3_BASE 49 # define CONFIG_SYS_NS16550_COM5 SUNXI_R_UART_BASE 50 #endif 51 52 /* CPU */ 53 #define COUNTER_FREQUENCY 24000000 54 55 /* 56 * The DRAM Base differs between some models. We cannot use macros for the 57 * CONFIG_FOO defines which contain the DRAM base address since they end 58 * up unexpanded in include/autoconf.mk . 59 * 60 * So we have to have this #ifdef #else #endif block for these. 61 */ 62 #ifdef CONFIG_MACH_SUN9I 63 #define SDRAM_OFFSET(x) 0x2##x 64 #define CONFIG_SYS_SDRAM_BASE 0x20000000 65 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* default load address */ 66 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here 67 * since it needs to fit in with the other values. By also #defining it 68 * we get warnings if the Kconfig value mismatches. */ 69 #define CONFIG_SPL_STACK_R_ADDR 0x2fe00000 70 #define CONFIG_SPL_BSS_START_ADDR 0x2ff80000 71 #else 72 #define SDRAM_OFFSET(x) 0x4##x 73 #define CONFIG_SYS_SDRAM_BASE 0x40000000 74 #define CONFIG_SYS_LOAD_ADDR 0x42000000 /* default load address */ 75 /* V3s do not have enough memory to place code at 0x4a000000 */ 76 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here 77 * since it needs to fit in with the other values. By also #defining it 78 * we get warnings if the Kconfig value mismatches. */ 79 #define CONFIG_SPL_STACK_R_ADDR 0x4fe00000 80 #define CONFIG_SPL_BSS_START_ADDR 0x4ff80000 81 #endif 82 83 #define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 /* 512 KiB */ 84 85 /* 86 * The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is 87 * slightly bigger. Note that it is possible to map the first 32 KiB of the 88 * A1 at 0x00000000 like with older SoCs by writing 0x16aa0001 to the 89 * undocumented 0x008000e0 SYS_CTRL register. Where the 16aa is a key and 90 * the 1 actually activates the mapping of the first 32 KiB to 0x00000000. 91 * A64 and H5 also has SRAM A1 at 0x00010000, but no magic remap register 92 * is known yet. 93 * H6 has SRAM A1 at 0x00020000. 94 */ 95 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SUNXI_SRAM_ADDRESS 96 /* FIXME: this may be larger on some SoCs */ 97 #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* 32 KiB */ 98 99 #define CONFIG_SYS_INIT_SP_OFFSET \ 100 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 101 #define CONFIG_SYS_INIT_SP_ADDR \ 102 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 103 104 #define PHYS_SDRAM_0 CONFIG_SYS_SDRAM_BASE 105 #define PHYS_SDRAM_0_SIZE 0x80000000 /* 2 GiB */ 106 107 #ifdef CONFIG_AHCI 108 #define CONFIG_SCSI_AHCI_PLAT 109 #define CONFIG_SUNXI_AHCI 110 #define CONFIG_SYS_64BIT_LBA 111 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 112 #define CONFIG_SYS_SCSI_MAX_LUN 1 113 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 114 CONFIG_SYS_SCSI_MAX_LUN) 115 #endif 116 117 #define CONFIG_SETUP_MEMORY_TAGS 118 #define CONFIG_CMDLINE_TAG 119 #define CONFIG_INITRD_TAG 120 #define CONFIG_SERIAL_TAG 121 122 #ifdef CONFIG_NAND_SUNXI 123 #define CONFIG_SYS_NAND_MAX_ECCPOS 1664 124 #define CONFIG_SYS_NAND_ONFI_DETECTION 125 #define CONFIG_SYS_MAX_NAND_DEVICE 8 126 #endif 127 128 #ifdef CONFIG_SPL_SPI_SUNXI 129 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 130 #endif 131 132 /* mmc config */ 133 #ifdef CONFIG_MMC 134 #define CONFIG_MMC_SUNXI_SLOT 0 135 #endif 136 137 #if defined(CONFIG_ENV_IS_IN_MMC) 138 139 #ifdef CONFIG_ARM64 140 /* 141 * This is actually (CONFIG_ENV_OFFSET - 142 * (CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)), but the value will be used 143 * directly in a makefile, without the preprocessor expansion. 144 */ 145 #define CONFIG_BOARD_SIZE_LIMIT 0x7e000 146 #endif 147 148 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1 149 /* If we have two devices (most likely eMMC + MMC), favour the eMMC */ 150 #define CONFIG_SYS_MMC_ENV_DEV 1 151 #else 152 /* Otherwise, use the only device we have */ 153 #define CONFIG_SYS_MMC_ENV_DEV 0 154 #endif 155 #define CONFIG_SYS_MMC_MAX_DEVICE 4 156 #endif 157 158 #ifndef CONFIG_MACH_SUN8I_V3S 159 /* 64MB of malloc() pool */ 160 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (64 << 20)) 161 #else 162 /* 2MB of malloc() pool */ 163 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (2 << 20)) 164 #endif 165 166 /* 167 * Miscellaneous configurable options 168 */ 169 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 170 #define CONFIG_SYS_PBSIZE 1024 /* Print Buffer Size */ 171 172 /* standalone support */ 173 #define CONFIG_STANDALONE_LOAD_ADDR CONFIG_SYS_LOAD_ADDR 174 175 /* FLASH and environment organization */ 176 177 #define CONFIG_SYS_MONITOR_LEN (768 << 10) /* 768 KiB */ 178 179 #ifndef CONFIG_ARM64 /* AArch64 FEL support is not ready yet */ 180 #define CONFIG_SPL_BOARD_LOAD_IMAGE 181 #endif 182 183 /* 184 * We cannot use expressions here, because expressions won't be evaluated in 185 * autoconf.mk. 186 */ 187 #if CONFIG_SUNXI_SRAM_ADDRESS == 0x10000 188 #define CONFIG_SPL_TEXT_BASE 0x10060 /* sram start+header */ 189 #define CONFIG_SPL_MAX_SIZE 0x7fa0 /* 32 KiB */ 190 #ifdef CONFIG_ARM64 191 /* end of SRAM A2 for now, as SRAM A1 is pretty tight for an ARM64 build */ 192 #define LOW_LEVEL_SRAM_STACK 0x00054000 193 #else 194 #define LOW_LEVEL_SRAM_STACK 0x00018000 195 #endif /* !CONFIG_ARM64 */ 196 #elif CONFIG_SUNXI_SRAM_ADDRESS == 0x20000 197 #define CONFIG_SPL_TEXT_BASE 0x20060 /* sram start+header */ 198 #define CONFIG_SPL_MAX_SIZE 0x7fa0 /* 32 KiB */ 199 /* end of SRAM A2 on H6 for now */ 200 #define LOW_LEVEL_SRAM_STACK 0x00118000 201 #else 202 #define CONFIG_SPL_TEXT_BASE 0x60 /* sram start+header */ 203 #define CONFIG_SPL_MAX_SIZE 0x5fa0 /* 24KB on sun4i/sun7i */ 204 #define LOW_LEVEL_SRAM_STACK 0x00008000 /* End of sram */ 205 #endif 206 207 #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK 208 209 #define CONFIG_SPL_PAD_TO 32768 /* decimal for 'dd' */ 210 211 212 /* I2C */ 213 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \ 214 defined CONFIG_SY8106A_POWER 215 #endif 216 217 #if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \ 218 defined CONFIG_I2C2_ENABLE || defined CONFIG_I2C3_ENABLE || \ 219 defined CONFIG_I2C4_ENABLE || defined CONFIG_R_I2C_ENABLE 220 #define CONFIG_SYS_I2C_MVTWSI 221 #ifndef CONFIG_DM_I2C 222 #define CONFIG_SYS_I2C 223 #define CONFIG_SYS_I2C_SPEED 400000 224 #define CONFIG_SYS_I2C_SLAVE 0x7f 225 #endif 226 #endif 227 228 #if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD) 229 #define CONFIG_SYS_I2C_SOFT 230 #define CONFIG_SYS_I2C_SOFT_SPEED 50000 231 #define CONFIG_SYS_I2C_SOFT_SLAVE 0x00 232 /* We use pin names in Kconfig and sunxi_name_to_gpio() */ 233 #define CONFIG_SOFT_I2C_GPIO_SDA soft_i2c_gpio_sda 234 #define CONFIG_SOFT_I2C_GPIO_SCL soft_i2c_gpio_scl 235 #ifndef __ASSEMBLY__ 236 extern int soft_i2c_gpio_sda; 237 extern int soft_i2c_gpio_scl; 238 #endif 239 #define CONFIG_VIDEO_LCD_I2C_BUS 0 /* The lcd panel soft i2c is bus 0 */ 240 #define CONFIG_SYS_SPD_BUS_NUM 1 /* And the axp209 i2c bus is bus 1 */ 241 #else 242 #define CONFIG_SYS_SPD_BUS_NUM 0 /* The axp209 i2c bus is bus 0 */ 243 #define CONFIG_VIDEO_LCD_I2C_BUS -1 /* NA, but necessary to compile */ 244 #endif 245 246 /* PMU */ 247 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \ 248 defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER || \ 249 defined CONFIG_SY8106A_POWER 250 #endif 251 252 #ifdef CONFIG_REQUIRE_SERIAL_CONSOLE 253 #if CONFIG_CONS_INDEX == 1 254 #ifdef CONFIG_MACH_SUN9I 255 #define OF_STDOUT_PATH "/soc/serial@07000000:115200" 256 #else 257 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28000:115200" 258 #endif 259 #elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I) 260 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28400:115200" 261 #elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I) 262 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28800:115200" 263 #elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I) 264 #define OF_STDOUT_PATH "/soc@01c00000/serial@01f02800:115200" 265 #else 266 #error Unsupported console port nr. Please fix stdout-path in sunxi-common.h. 267 #endif 268 #endif /* ifdef CONFIG_REQUIRE_SERIAL_CONSOLE */ 269 270 /* GPIO */ 271 #define CONFIG_SUNXI_GPIO 272 273 #ifdef CONFIG_VIDEO_SUNXI 274 /* 275 * The amount of RAM to keep free at the top of RAM when relocating u-boot, 276 * to use as framebuffer. This must be a multiple of 4096. 277 */ 278 #define CONFIG_SUNXI_MAX_FB_SIZE (16 << 20) 279 280 #define CONFIG_VIDEO_LOGO 281 #define CONFIG_VIDEO_STD_TIMINGS 282 #define CONFIG_I2C_EDID 283 #define VIDEO_LINE_LEN (pGD->plnSizeX) 284 285 /* allow both serial and cfb console. */ 286 /* stop x86 thinking in cfbconsole from trying to init a pc keyboard */ 287 288 #endif /* CONFIG_VIDEO_SUNXI */ 289 290 /* Ethernet support */ 291 292 #ifdef CONFIG_SUN7I_GMAC 293 #define CONFIG_PHY_REALTEK 294 #endif 295 296 #ifdef CONFIG_USB_EHCI_HCD 297 #define CONFIG_USB_OHCI_NEW 298 #define CONFIG_USB_OHCI_SUNXI 299 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 300 #endif 301 302 #ifdef CONFIG_USB_KEYBOARD 303 #define CONFIG_PREBOOT 304 #endif 305 306 #ifndef CONFIG_SPL_BUILD 307 308 #ifdef CONFIG_ARM64 309 /* 310 * Boards seem to come with at least 512MB of DRAM. 311 * The kernel should go at 512K, which is the default text offset (that will 312 * be adjusted at runtime if needed). 313 * There is no compression for arm64 kernels (yet), so leave some space 314 * for really big kernels, say 256MB for now. 315 * Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd. 316 * Align the initrd to a 2MB page. 317 */ 318 #define BOOTM_SIZE __stringify(0xa000000) 319 #define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(0080000)) 320 #define FDT_ADDR_R __stringify(SDRAM_OFFSET(FA00000)) 321 #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(FC00000)) 322 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(FD00000)) 323 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(FE00000)) 324 325 #else 326 /* 327 * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc. 328 * 32M uncompressed kernel, 16M compressed kernel, 1M fdt, 329 * 1M script, 1M pxe and the ramdisk at the end. 330 */ 331 #ifndef CONFIG_MACH_SUN8I_V3S 332 #define BOOTM_SIZE __stringify(0xa000000) 333 #define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(2000000)) 334 #define FDT_ADDR_R __stringify(SDRAM_OFFSET(3000000)) 335 #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(3100000)) 336 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000)) 337 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3300000)) 338 #else 339 /* 340 * 64M RAM minus 2MB heap + 16MB for u-boot, stack, fb, etc. 341 * 16M uncompressed kernel, 8M compressed kernel, 1M fdt, 342 * 1M script, 1M pxe and the ramdisk at the end. 343 */ 344 #define BOOTM_SIZE __stringify(0x2e00000) 345 #define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(1000000)) 346 #define FDT_ADDR_R __stringify(SDRAM_OFFSET(1800000)) 347 #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(1900000)) 348 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(1A00000)) 349 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(1B00000)) 350 #endif 351 #endif 352 353 #define MEM_LAYOUT_ENV_SETTINGS \ 354 "bootm_size=" BOOTM_SIZE "\0" \ 355 "kernel_addr_r=" KERNEL_ADDR_R "\0" \ 356 "fdt_addr_r=" FDT_ADDR_R "\0" \ 357 "scriptaddr=" SCRIPT_ADDR_R "\0" \ 358 "pxefile_addr_r=" PXEFILE_ADDR_R "\0" \ 359 "ramdisk_addr_r=" RAMDISK_ADDR_R "\0" 360 361 #define DFU_ALT_INFO_RAM \ 362 "dfu_alt_info_ram=" \ 363 "kernel ram " KERNEL_ADDR_R " 0x1000000;" \ 364 "fdt ram " FDT_ADDR_R " 0x100000;" \ 365 "ramdisk ram " RAMDISK_ADDR_R " 0x4000000\0" 366 367 #ifdef CONFIG_MMC 368 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1 369 #define BOOTENV_DEV_MMC_AUTO(devtypeu, devtypel, instance) \ 370 BOOTENV_DEV_MMC(MMC, mmc, 0) \ 371 BOOTENV_DEV_MMC(MMC, mmc, 1) \ 372 "bootcmd_mmc_auto=" \ 373 "if test ${mmc_bootdev} -eq 1; then " \ 374 "run bootcmd_mmc1; " \ 375 "run bootcmd_mmc0; " \ 376 "elif test ${mmc_bootdev} -eq 0; then " \ 377 "run bootcmd_mmc0; " \ 378 "run bootcmd_mmc1; " \ 379 "fi\0" 380 381 #define BOOTENV_DEV_NAME_MMC_AUTO(devtypeu, devtypel, instance) \ 382 "mmc_auto " 383 384 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC_AUTO, mmc_auto, na) 385 #else 386 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) 387 #endif 388 #else 389 #define BOOT_TARGET_DEVICES_MMC(func) 390 #endif 391 392 #ifdef CONFIG_AHCI 393 #define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0) 394 #else 395 #define BOOT_TARGET_DEVICES_SCSI(func) 396 #endif 397 398 #ifdef CONFIG_USB_STORAGE 399 #define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) 400 #else 401 #define BOOT_TARGET_DEVICES_USB(func) 402 #endif 403 404 /* FEL boot support, auto-execute boot.scr if a script address was provided */ 405 #define BOOTENV_DEV_FEL(devtypeu, devtypel, instance) \ 406 "bootcmd_fel=" \ 407 "if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then " \ 408 "echo '(FEL boot)'; " \ 409 "source ${fel_scriptaddr}; " \ 410 "fi\0" 411 #define BOOTENV_DEV_NAME_FEL(devtypeu, devtypel, instance) \ 412 "fel " 413 414 #define BOOT_TARGET_DEVICES(func) \ 415 func(FEL, fel, na) \ 416 BOOT_TARGET_DEVICES_MMC(func) \ 417 BOOT_TARGET_DEVICES_SCSI(func) \ 418 BOOT_TARGET_DEVICES_USB(func) \ 419 func(PXE, pxe, na) \ 420 func(DHCP, dhcp, na) 421 422 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT 423 #define BOOTCMD_SUNXI_COMPAT \ 424 "bootcmd_sunxi_compat=" \ 425 "setenv root /dev/mmcblk0p3 rootwait; " \ 426 "if ext2load mmc 0 0x44000000 uEnv.txt; then " \ 427 "echo Loaded environment from uEnv.txt; " \ 428 "env import -t 0x44000000 ${filesize}; " \ 429 "fi; " \ 430 "setenv bootargs console=${console} root=${root} ${extraargs}; " \ 431 "ext2load mmc 0 0x43000000 script.bin && " \ 432 "ext2load mmc 0 0x48000000 uImage && " \ 433 "bootm 0x48000000\0" 434 #else 435 #define BOOTCMD_SUNXI_COMPAT 436 #endif 437 438 #include <config_distro_bootcmd.h> 439 440 #ifdef CONFIG_USB_KEYBOARD 441 #define CONSOLE_STDIN_SETTINGS \ 442 "preboot=usb start\0" \ 443 "stdin=serial,usbkbd\0" 444 #else 445 #define CONSOLE_STDIN_SETTINGS \ 446 "stdin=serial\0" 447 #endif 448 449 #ifdef CONFIG_VIDEO 450 #define CONSOLE_STDOUT_SETTINGS \ 451 "stdout=serial,vga\0" \ 452 "stderr=serial,vga\0" 453 #elif CONFIG_DM_VIDEO 454 #define CONFIG_SYS_WHITE_ON_BLACK 455 #define CONSOLE_STDOUT_SETTINGS \ 456 "stdout=serial,vidconsole\0" \ 457 "stderr=serial,vidconsole\0" 458 #else 459 #define CONSOLE_STDOUT_SETTINGS \ 460 "stdout=serial\0" \ 461 "stderr=serial\0" 462 #endif 463 464 #ifdef CONFIG_MTDIDS_DEFAULT 465 #define SUNXI_MTDIDS_DEFAULT \ 466 "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" 467 #else 468 #define SUNXI_MTDIDS_DEFAULT 469 #endif 470 471 #ifdef CONFIG_MTDPARTS_DEFAULT 472 #define SUNXI_MTDPARTS_DEFAULT \ 473 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" 474 #else 475 #define SUNXI_MTDPARTS_DEFAULT 476 #endif 477 478 #define PARTS_DEFAULT \ 479 "name=loader1,start=8k,size=32k,uuid=${uuid_gpt_loader1};" \ 480 "name=loader2,size=984k,uuid=${uuid_gpt_loader2};" \ 481 "name=esp,size=128M,bootable,uuid=${uuid_gpt_esp};" \ 482 "name=system,size=-,uuid=${uuid_gpt_system};" 483 484 #define UUID_GPT_ESP "c12a7328-f81f-11d2-ba4b-00a0c93ec93b" 485 486 #ifdef CONFIG_ARM64 487 #define UUID_GPT_SYSTEM "b921b045-1df0-41c3-af44-4c6f280d3fae" 488 #else 489 #define UUID_GPT_SYSTEM "69dad710-2ce4-4e3c-b16c-21a1d49abed3" 490 #endif 491 492 #define CONSOLE_ENV_SETTINGS \ 493 CONSOLE_STDIN_SETTINGS \ 494 CONSOLE_STDOUT_SETTINGS 495 496 #ifdef CONFIG_ARM64 497 #define FDTFILE "allwinner/" CONFIG_DEFAULT_DEVICE_TREE ".dtb" 498 #else 499 #define FDTFILE CONFIG_DEFAULT_DEVICE_TREE ".dtb" 500 #endif 501 502 #define CONFIG_EXTRA_ENV_SETTINGS \ 503 CONSOLE_ENV_SETTINGS \ 504 MEM_LAYOUT_ENV_SETTINGS \ 505 DFU_ALT_INFO_RAM \ 506 "fdtfile=" FDTFILE "\0" \ 507 "console=ttyS0,115200\0" \ 508 SUNXI_MTDIDS_DEFAULT \ 509 SUNXI_MTDPARTS_DEFAULT \ 510 "uuid_gpt_esp=" UUID_GPT_ESP "\0" \ 511 "uuid_gpt_system=" UUID_GPT_SYSTEM "\0" \ 512 "partitions=" PARTS_DEFAULT "\0" \ 513 BOOTCMD_SUNXI_COMPAT \ 514 BOOTENV 515 516 #else /* ifndef CONFIG_SPL_BUILD */ 517 #define CONFIG_EXTRA_ENV_SETTINGS 518 #endif 519 520 #endif /* _SUNXI_COMMON_CONFIG_H */ 521