1 /* 2 * (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net> 3 * 4 * (C) Copyright 2007-2011 5 * Allwinner Technology Co., Ltd. <www.allwinnertech.com> 6 * Tom Cubie <tangliang@allwinnertech.com> 7 * 8 * Configuration settings for the Allwinner sunxi series of boards. 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 #ifndef _SUNXI_COMMON_CONFIG_H 14 #define _SUNXI_COMMON_CONFIG_H 15 16 #include <asm/arch/cpu.h> 17 #include <linux/stringify.h> 18 19 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT 20 /* 21 * The U-Boot workarounds bugs in the outdated buggy sunxi-3.4 kernels at the 22 * expense of restricting some features, so the regular machine id values can 23 * be used. 24 */ 25 # define CONFIG_MACH_TYPE_COMPAT_REV 0 26 #else 27 /* 28 * A compatibility guard to prevent loading outdated buggy sunxi-3.4 kernels. 29 * Only sunxi-3.4 kernels with appropriate fixes applied are able to pass 30 * beyond the machine id check. 31 */ 32 # define CONFIG_MACH_TYPE_COMPAT_REV 1 33 #endif 34 35 #ifdef CONFIG_ARM64 36 #define CONFIG_BUILD_TARGET "u-boot.itb" 37 #define CONFIG_SYS_BOOTM_LEN (32 << 20) 38 #endif 39 40 /* Serial & console */ 41 #define CONFIG_SYS_NS16550_SERIAL 42 /* ns16550 reg in the low bits of cpu reg */ 43 #define CONFIG_SYS_NS16550_CLK 24000000 44 #ifndef CONFIG_DM_SERIAL 45 # define CONFIG_SYS_NS16550_REG_SIZE -4 46 # define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE 47 # define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE 48 # define CONFIG_SYS_NS16550_COM3 SUNXI_UART2_BASE 49 # define CONFIG_SYS_NS16550_COM4 SUNXI_UART3_BASE 50 # define CONFIG_SYS_NS16550_COM5 SUNXI_R_UART_BASE 51 #endif 52 53 /* CPU */ 54 #define COUNTER_FREQUENCY 24000000 55 56 /* 57 * The DRAM Base differs between some models. We cannot use macros for the 58 * CONFIG_FOO defines which contain the DRAM base address since they end 59 * up unexpanded in include/autoconf.mk . 60 * 61 * So we have to have this #ifdef #else #endif block for these. 62 */ 63 #ifdef CONFIG_MACH_SUN9I 64 #define SDRAM_OFFSET(x) 0x2##x 65 #define CONFIG_SYS_SDRAM_BASE 0x20000000 66 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* default load address */ 67 #define CONFIG_SYS_TEXT_BASE 0x2a000000 68 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here 69 * since it needs to fit in with the other values. By also #defining it 70 * we get warnings if the Kconfig value mismatches. */ 71 #define CONFIG_SPL_STACK_R_ADDR 0x2fe00000 72 #define CONFIG_SPL_BSS_START_ADDR 0x2ff80000 73 #else 74 #define SDRAM_OFFSET(x) 0x4##x 75 #define CONFIG_SYS_SDRAM_BASE 0x40000000 76 #define CONFIG_SYS_LOAD_ADDR 0x42000000 /* default load address */ 77 /* V3s do not have enough memory to place code at 0x4a000000 */ 78 #ifndef CONFIG_MACH_SUN8I_V3S 79 #define CONFIG_SYS_TEXT_BASE 0x4a000000 80 #else 81 #define CONFIG_SYS_TEXT_BASE 0x42e00000 82 #endif 83 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here 84 * since it needs to fit in with the other values. By also #defining it 85 * we get warnings if the Kconfig value mismatches. */ 86 #define CONFIG_SPL_STACK_R_ADDR 0x4fe00000 87 #define CONFIG_SPL_BSS_START_ADDR 0x4ff80000 88 #endif 89 90 #define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 /* 512 KiB */ 91 92 #ifdef CONFIG_SUNXI_HIGH_SRAM 93 /* 94 * The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is 95 * slightly bigger. Note that it is possible to map the first 32 KiB of the 96 * A1 at 0x00000000 like with older SoCs by writing 0x16aa0001 to the 97 * undocumented 0x008000e0 SYS_CTRL register. Where the 16aa is a key and 98 * the 1 actually activates the mapping of the first 32 KiB to 0x00000000. 99 */ 100 #define CONFIG_SYS_INIT_RAM_ADDR 0x10000 101 #define CONFIG_SYS_INIT_RAM_SIZE 0x08000 /* FIXME: 40 KiB ? */ 102 #else 103 #define CONFIG_SYS_INIT_RAM_ADDR 0x0 104 #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* 32 KiB */ 105 #endif 106 107 #define CONFIG_SYS_INIT_SP_OFFSET \ 108 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 109 #define CONFIG_SYS_INIT_SP_ADDR \ 110 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 111 112 #define CONFIG_NR_DRAM_BANKS 1 113 #define PHYS_SDRAM_0 CONFIG_SYS_SDRAM_BASE 114 #define PHYS_SDRAM_0_SIZE 0x80000000 /* 2 GiB */ 115 116 #ifdef CONFIG_AHCI 117 #define CONFIG_SCSI_AHCI_PLAT 118 #define CONFIG_SUNXI_AHCI 119 #define CONFIG_SYS_64BIT_LBA 120 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 121 #define CONFIG_SYS_SCSI_MAX_LUN 1 122 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 123 CONFIG_SYS_SCSI_MAX_LUN) 124 #endif 125 126 #define CONFIG_SETUP_MEMORY_TAGS 127 #define CONFIG_CMDLINE_TAG 128 #define CONFIG_INITRD_TAG 129 #define CONFIG_SERIAL_TAG 130 131 #ifdef CONFIG_NAND_SUNXI 132 #define CONFIG_SYS_NAND_MAX_ECCPOS 1664 133 #define CONFIG_SYS_NAND_ONFI_DETECTION 134 #define CONFIG_SYS_MAX_NAND_DEVICE 8 135 136 #define CONFIG_MTD_DEVICE 137 #define CONFIG_MTD_PARTITIONS 138 #endif 139 140 #ifdef CONFIG_SPL_SPI_SUNXI 141 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 142 #endif 143 144 /* mmc config */ 145 #ifdef CONFIG_MMC 146 #define CONFIG_MMC_SUNXI_SLOT 0 147 #endif 148 149 #if defined(CONFIG_ENV_IS_IN_MMC) 150 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1 151 /* If we have two devices (most likely eMMC + MMC), favour the eMMC */ 152 #define CONFIG_SYS_MMC_ENV_DEV 1 153 #else 154 /* Otherwise, use the only device we have */ 155 #define CONFIG_SYS_MMC_ENV_DEV 0 156 #endif 157 #define CONFIG_SYS_MMC_MAX_DEVICE 4 158 #elif defined(CONFIG_ENV_IS_NOWHERE) 159 #define CONFIG_ENV_SIZE (128 << 10) 160 #endif 161 162 #ifndef CONFIG_MACH_SUN8I_V3S 163 /* 64MB of malloc() pool */ 164 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (64 << 20)) 165 #else 166 /* 2MB of malloc() pool */ 167 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (2 << 20)) 168 #endif 169 170 /* 171 * Miscellaneous configurable options 172 */ 173 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 174 #define CONFIG_SYS_PBSIZE 1024 /* Print Buffer Size */ 175 176 /* standalone support */ 177 #define CONFIG_STANDALONE_LOAD_ADDR CONFIG_SYS_LOAD_ADDR 178 179 /* FLASH and environment organization */ 180 181 #define CONFIG_SYS_MONITOR_LEN (768 << 10) /* 768 KiB */ 182 183 #define CONFIG_SPL_FRAMEWORK 184 185 #ifndef CONFIG_ARM64 /* AArch64 FEL support is not ready yet */ 186 #define CONFIG_SPL_BOARD_LOAD_IMAGE 187 #endif 188 189 #ifdef CONFIG_SUNXI_HIGH_SRAM 190 #define CONFIG_SPL_TEXT_BASE 0x10060 /* sram start+header */ 191 #define CONFIG_SPL_MAX_SIZE 0x7fa0 /* 32 KiB */ 192 #ifdef CONFIG_ARM64 193 /* end of SRAM A2 for now, as SRAM A1 is pretty tight for an ARM64 build */ 194 #define LOW_LEVEL_SRAM_STACK 0x00054000 195 #else 196 #define LOW_LEVEL_SRAM_STACK 0x00018000 197 #endif /* !CONFIG_ARM64 */ 198 #else 199 #define CONFIG_SPL_TEXT_BASE 0x60 /* sram start+header */ 200 #define CONFIG_SPL_MAX_SIZE 0x5fa0 /* 24KB on sun4i/sun7i */ 201 #define LOW_LEVEL_SRAM_STACK 0x00008000 /* End of sram */ 202 #endif 203 204 #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK 205 206 #define CONFIG_SPL_PAD_TO 32768 /* decimal for 'dd' */ 207 208 209 /* I2C */ 210 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \ 211 defined CONFIG_SY8106A_POWER 212 #endif 213 214 #if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \ 215 defined CONFIG_I2C2_ENABLE || defined CONFIG_I2C3_ENABLE || \ 216 defined CONFIG_I2C4_ENABLE || defined CONFIG_R_I2C_ENABLE 217 #define CONFIG_SYS_I2C_MVTWSI 218 #ifndef CONFIG_DM_I2C 219 #define CONFIG_SYS_I2C 220 #define CONFIG_SYS_I2C_SPEED 400000 221 #define CONFIG_SYS_I2C_SLAVE 0x7f 222 #endif 223 #endif 224 225 #if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD) 226 #define CONFIG_SYS_I2C_SOFT 227 #define CONFIG_SYS_I2C_SOFT_SPEED 50000 228 #define CONFIG_SYS_I2C_SOFT_SLAVE 0x00 229 /* We use pin names in Kconfig and sunxi_name_to_gpio() */ 230 #define CONFIG_SOFT_I2C_GPIO_SDA soft_i2c_gpio_sda 231 #define CONFIG_SOFT_I2C_GPIO_SCL soft_i2c_gpio_scl 232 #ifndef __ASSEMBLY__ 233 extern int soft_i2c_gpio_sda; 234 extern int soft_i2c_gpio_scl; 235 #endif 236 #define CONFIG_VIDEO_LCD_I2C_BUS 0 /* The lcd panel soft i2c is bus 0 */ 237 #define CONFIG_SYS_SPD_BUS_NUM 1 /* And the axp209 i2c bus is bus 1 */ 238 #else 239 #define CONFIG_SYS_SPD_BUS_NUM 0 /* The axp209 i2c bus is bus 0 */ 240 #define CONFIG_VIDEO_LCD_I2C_BUS -1 /* NA, but necessary to compile */ 241 #endif 242 243 /* PMU */ 244 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \ 245 defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER || \ 246 defined CONFIG_SY8106A_POWER 247 #endif 248 249 #ifdef CONFIG_REQUIRE_SERIAL_CONSOLE 250 #if CONFIG_CONS_INDEX == 1 251 #ifdef CONFIG_MACH_SUN9I 252 #define OF_STDOUT_PATH "/soc/serial@07000000:115200" 253 #else 254 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28000:115200" 255 #endif 256 #elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I) 257 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28400:115200" 258 #elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I) 259 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28800:115200" 260 #elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I) 261 #define OF_STDOUT_PATH "/soc@01c00000/serial@01f02800:115200" 262 #else 263 #error Unsupported console port nr. Please fix stdout-path in sunxi-common.h. 264 #endif 265 #endif /* ifdef CONFIG_REQUIRE_SERIAL_CONSOLE */ 266 267 /* GPIO */ 268 #define CONFIG_SUNXI_GPIO 269 270 #ifdef CONFIG_VIDEO_SUNXI 271 /* 272 * The amount of RAM to keep free at the top of RAM when relocating u-boot, 273 * to use as framebuffer. This must be a multiple of 4096. 274 */ 275 #define CONFIG_SUNXI_MAX_FB_SIZE (16 << 20) 276 277 #define CONFIG_VIDEO_LOGO 278 #define CONFIG_VIDEO_STD_TIMINGS 279 #define CONFIG_I2C_EDID 280 #define VIDEO_LINE_LEN (pGD->plnSizeX) 281 282 /* allow both serial and cfb console. */ 283 /* stop x86 thinking in cfbconsole from trying to init a pc keyboard */ 284 285 #endif /* CONFIG_VIDEO_SUNXI */ 286 287 /* Ethernet support */ 288 #ifdef CONFIG_SUN4I_EMAC 289 #define CONFIG_PHY_ADDR 1 290 #define CONFIG_MII /* MII PHY management */ 291 #endif 292 293 #ifdef CONFIG_SUN7I_GMAC 294 #define CONFIG_PHY_ADDR 1 295 #define CONFIG_MII /* MII PHY management */ 296 #define CONFIG_PHY_REALTEK 297 #endif 298 299 #ifdef CONFIG_USB_EHCI_HCD 300 #define CONFIG_USB_OHCI_NEW 301 #define CONFIG_USB_OHCI_SUNXI 302 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 303 #endif 304 305 #ifdef CONFIG_USB_MUSB_GADGET 306 #define CONFIG_USB_FUNCTION_MASS_STORAGE 307 #endif 308 309 #ifdef CONFIG_USB_FUNCTION_MASS_STORAGE 310 #endif 311 312 #ifdef CONFIG_USB_KEYBOARD 313 #define CONFIG_PREBOOT 314 #endif 315 316 #define CONFIG_MISC_INIT_R 317 318 #ifndef CONFIG_SPL_BUILD 319 #include <config_distro_defaults.h> 320 321 #ifdef CONFIG_ARM64 322 /* 323 * Boards seem to come with at least 512MB of DRAM. 324 * The kernel should go at 512K, which is the default text offset (that will 325 * be adjusted at runtime if needed). 326 * There is no compression for arm64 kernels (yet), so leave some space 327 * for really big kernels, say 256MB for now. 328 * Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd. 329 * Align the initrd to a 2MB page. 330 */ 331 #define BOOTM_SIZE __stringify(0xa000000) 332 #define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(0080000)) 333 #define FDT_ADDR_R __stringify(SDRAM_OFFSET(FA00000)) 334 #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(FC00000)) 335 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(FD00000)) 336 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(FE00000)) 337 338 #else 339 /* 340 * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc. 341 * 32M uncompressed kernel, 16M compressed kernel, 1M fdt, 342 * 1M script, 1M pxe and the ramdisk at the end. 343 */ 344 #ifndef CONFIG_MACH_SUN8I_V3S 345 #define BOOTM_SIZE __stringify(0xa000000) 346 #define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(2000000)) 347 #define FDT_ADDR_R __stringify(SDRAM_OFFSET(3000000)) 348 #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(3100000)) 349 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000)) 350 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3300000)) 351 #else 352 /* 353 * 64M RAM minus 2MB heap + 16MB for u-boot, stack, fb, etc. 354 * 16M uncompressed kernel, 8M compressed kernel, 1M fdt, 355 * 1M script, 1M pxe and the ramdisk at the end. 356 */ 357 #define BOOTM_SIZE __stringify(0x2e00000) 358 #define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(1000000)) 359 #define FDT_ADDR_R __stringify(SDRAM_OFFSET(1800000)) 360 #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(1900000)) 361 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(1A00000)) 362 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(1B00000)) 363 #endif 364 #endif 365 366 #define MEM_LAYOUT_ENV_SETTINGS \ 367 "bootm_size=" BOOTM_SIZE "\0" \ 368 "kernel_addr_r=" KERNEL_ADDR_R "\0" \ 369 "fdt_addr_r=" FDT_ADDR_R "\0" \ 370 "scriptaddr=" SCRIPT_ADDR_R "\0" \ 371 "pxefile_addr_r=" PXEFILE_ADDR_R "\0" \ 372 "ramdisk_addr_r=" RAMDISK_ADDR_R "\0" 373 374 #define DFU_ALT_INFO_RAM \ 375 "dfu_alt_info_ram=" \ 376 "kernel ram " KERNEL_ADDR_R " 0x1000000;" \ 377 "fdt ram " FDT_ADDR_R " 0x100000;" \ 378 "ramdisk ram " RAMDISK_ADDR_R " 0x4000000\0" 379 380 #ifdef CONFIG_MMC 381 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1 382 #define BOOTENV_DEV_MMC_AUTO(devtypeu, devtypel, instance) \ 383 BOOTENV_DEV_MMC(MMC, mmc, 0) \ 384 BOOTENV_DEV_MMC(MMC, mmc, 1) \ 385 "bootcmd_mmc_auto=" \ 386 "if test ${mmc_bootdev} -eq 1; then " \ 387 "run bootcmd_mmc1; " \ 388 "run bootcmd_mmc0; " \ 389 "elif test ${mmc_bootdev} -eq 0; then " \ 390 "run bootcmd_mmc0; " \ 391 "run bootcmd_mmc1; " \ 392 "fi\0" 393 394 #define BOOTENV_DEV_NAME_MMC_AUTO(devtypeu, devtypel, instance) \ 395 "mmc_auto " 396 397 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC_AUTO, mmc_auto, na) 398 #else 399 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) 400 #endif 401 #else 402 #define BOOT_TARGET_DEVICES_MMC(func) 403 #endif 404 405 #ifdef CONFIG_AHCI 406 #define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0) 407 #else 408 #define BOOT_TARGET_DEVICES_SCSI(func) 409 #endif 410 411 #ifdef CONFIG_USB_STORAGE 412 #define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) 413 #else 414 #define BOOT_TARGET_DEVICES_USB(func) 415 #endif 416 417 /* FEL boot support, auto-execute boot.scr if a script address was provided */ 418 #define BOOTENV_DEV_FEL(devtypeu, devtypel, instance) \ 419 "bootcmd_fel=" \ 420 "if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then " \ 421 "echo '(FEL boot)'; " \ 422 "source ${fel_scriptaddr}; " \ 423 "fi\0" 424 #define BOOTENV_DEV_NAME_FEL(devtypeu, devtypel, instance) \ 425 "fel " 426 427 #define BOOT_TARGET_DEVICES(func) \ 428 func(FEL, fel, na) \ 429 BOOT_TARGET_DEVICES_MMC(func) \ 430 BOOT_TARGET_DEVICES_SCSI(func) \ 431 BOOT_TARGET_DEVICES_USB(func) \ 432 func(PXE, pxe, na) \ 433 func(DHCP, dhcp, na) 434 435 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT 436 #define BOOTCMD_SUNXI_COMPAT \ 437 "bootcmd_sunxi_compat=" \ 438 "setenv root /dev/mmcblk0p3 rootwait; " \ 439 "if ext2load mmc 0 0x44000000 uEnv.txt; then " \ 440 "echo Loaded environment from uEnv.txt; " \ 441 "env import -t 0x44000000 ${filesize}; " \ 442 "fi; " \ 443 "setenv bootargs console=${console} root=${root} ${extraargs}; " \ 444 "ext2load mmc 0 0x43000000 script.bin && " \ 445 "ext2load mmc 0 0x48000000 uImage && " \ 446 "bootm 0x48000000\0" 447 #else 448 #define BOOTCMD_SUNXI_COMPAT 449 #endif 450 451 #include <config_distro_bootcmd.h> 452 453 #ifdef CONFIG_USB_KEYBOARD 454 #define CONSOLE_STDIN_SETTINGS \ 455 "preboot=usb start\0" \ 456 "stdin=serial,usbkbd\0" 457 #else 458 #define CONSOLE_STDIN_SETTINGS \ 459 "stdin=serial\0" 460 #endif 461 462 #ifdef CONFIG_VIDEO 463 #define CONSOLE_STDOUT_SETTINGS \ 464 "stdout=serial,vga\0" \ 465 "stderr=serial,vga\0" 466 #elif CONFIG_DM_VIDEO 467 #define CONFIG_SYS_WHITE_ON_BLACK 468 #define CONSOLE_STDOUT_SETTINGS \ 469 "stdout=serial,vidconsole\0" \ 470 "stderr=serial,vidconsole\0" 471 #else 472 #define CONSOLE_STDOUT_SETTINGS \ 473 "stdout=serial\0" \ 474 "stderr=serial\0" 475 #endif 476 477 #ifdef CONFIG_MTDIDS_DEFAULT 478 #define SUNXI_MTDIDS_DEFAULT \ 479 "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" 480 #else 481 #define SUNXI_MTDIDS_DEFAULT 482 #endif 483 484 #ifdef CONFIG_MTDPARTS_DEFAULT 485 #define SUNXI_MTDPARTS_DEFAULT \ 486 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" 487 #else 488 #define SUNXI_MTDPARTS_DEFAULT 489 #endif 490 491 #define PARTS_DEFAULT \ 492 "name=loader1,start=8k,size=32k,uuid=${uuid_gpt_loader1};" \ 493 "name=loader2,size=984k,uuid=${uuid_gpt_loader2};" \ 494 "name=esp,size=128M,bootable,uuid=${uuid_gpt_esp};" \ 495 "name=system,size=-,uuid=${uuid_gpt_system};" 496 497 #define UUID_GPT_ESP "c12a7328-f81f-11d2-ba4b-00a0c93ec93b" 498 499 #ifdef CONFIG_ARM64 500 #define UUID_GPT_SYSTEM "b921b045-1df0-41c3-af44-4c6f280d3fae" 501 #else 502 #define UUID_GPT_SYSTEM "69dad710-2ce4-4e3c-b16c-21a1d49abed3" 503 #endif 504 505 #define CONSOLE_ENV_SETTINGS \ 506 CONSOLE_STDIN_SETTINGS \ 507 CONSOLE_STDOUT_SETTINGS 508 509 #ifdef CONFIG_ARM64 510 #define FDTFILE "allwinner/" CONFIG_DEFAULT_DEVICE_TREE ".dtb" 511 #else 512 #define FDTFILE CONFIG_DEFAULT_DEVICE_TREE ".dtb" 513 #endif 514 515 #define CONFIG_EXTRA_ENV_SETTINGS \ 516 CONSOLE_ENV_SETTINGS \ 517 MEM_LAYOUT_ENV_SETTINGS \ 518 DFU_ALT_INFO_RAM \ 519 "fdtfile=" FDTFILE "\0" \ 520 "console=ttyS0,115200\0" \ 521 SUNXI_MTDIDS_DEFAULT \ 522 SUNXI_MTDPARTS_DEFAULT \ 523 "uuid_gpt_esp=" UUID_GPT_ESP "\0" \ 524 "uuid_gpt_system=" UUID_GPT_SYSTEM "\0" \ 525 "partitions=" PARTS_DEFAULT "\0" \ 526 BOOTCMD_SUNXI_COMPAT \ 527 BOOTENV 528 529 #else /* ifndef CONFIG_SPL_BUILD */ 530 #define CONFIG_EXTRA_ENV_SETTINGS 531 #endif 532 533 #endif /* _SUNXI_COMMON_CONFIG_H */ 534