1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net> 4 * 5 * (C) Copyright 2007-2011 6 * Allwinner Technology Co., Ltd. <www.allwinnertech.com> 7 * Tom Cubie <tangliang@allwinnertech.com> 8 * 9 * Configuration settings for the Allwinner sunxi series of boards. 10 */ 11 12 #ifndef _SUNXI_COMMON_CONFIG_H 13 #define _SUNXI_COMMON_CONFIG_H 14 15 #include <asm/arch/cpu.h> 16 #include <linux/stringify.h> 17 18 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT 19 /* 20 * The U-Boot workarounds bugs in the outdated buggy sunxi-3.4 kernels at the 21 * expense of restricting some features, so the regular machine id values can 22 * be used. 23 */ 24 # define CONFIG_MACH_TYPE_COMPAT_REV 0 25 #else 26 /* 27 * A compatibility guard to prevent loading outdated buggy sunxi-3.4 kernels. 28 * Only sunxi-3.4 kernels with appropriate fixes applied are able to pass 29 * beyond the machine id check. 30 */ 31 # define CONFIG_MACH_TYPE_COMPAT_REV 1 32 #endif 33 34 #ifdef CONFIG_ARM64 35 #define CONFIG_BUILD_TARGET "u-boot.itb" 36 #define CONFIG_SYS_BOOTM_LEN (32 << 20) 37 #endif 38 39 /* Serial & console */ 40 #define CONFIG_SYS_NS16550_SERIAL 41 /* ns16550 reg in the low bits of cpu reg */ 42 #define CONFIG_SYS_NS16550_CLK 24000000 43 #ifndef CONFIG_DM_SERIAL 44 # define CONFIG_SYS_NS16550_REG_SIZE -4 45 # define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE 46 # define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE 47 # define CONFIG_SYS_NS16550_COM3 SUNXI_UART2_BASE 48 # define CONFIG_SYS_NS16550_COM4 SUNXI_UART3_BASE 49 # define CONFIG_SYS_NS16550_COM5 SUNXI_R_UART_BASE 50 #endif 51 52 /* CPU */ 53 #define COUNTER_FREQUENCY 24000000 54 55 /* 56 * The DRAM Base differs between some models. We cannot use macros for the 57 * CONFIG_FOO defines which contain the DRAM base address since they end 58 * up unexpanded in include/autoconf.mk . 59 * 60 * So we have to have this #ifdef #else #endif block for these. 61 */ 62 #ifdef CONFIG_MACH_SUN9I 63 #define SDRAM_OFFSET(x) 0x2##x 64 #define CONFIG_SYS_SDRAM_BASE 0x20000000 65 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* default load address */ 66 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here 67 * since it needs to fit in with the other values. By also #defining it 68 * we get warnings if the Kconfig value mismatches. */ 69 #define CONFIG_SPL_STACK_R_ADDR 0x2fe00000 70 #define CONFIG_SPL_BSS_START_ADDR 0x2ff80000 71 #else 72 #define SDRAM_OFFSET(x) 0x4##x 73 #define CONFIG_SYS_SDRAM_BASE 0x40000000 74 #define CONFIG_SYS_LOAD_ADDR 0x42000000 /* default load address */ 75 /* V3s do not have enough memory to place code at 0x4a000000 */ 76 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here 77 * since it needs to fit in with the other values. By also #defining it 78 * we get warnings if the Kconfig value mismatches. */ 79 #define CONFIG_SPL_STACK_R_ADDR 0x4fe00000 80 #define CONFIG_SPL_BSS_START_ADDR 0x4ff80000 81 #endif 82 83 #define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 /* 512 KiB */ 84 85 #ifdef CONFIG_SUNXI_HIGH_SRAM 86 /* 87 * The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is 88 * slightly bigger. Note that it is possible to map the first 32 KiB of the 89 * A1 at 0x00000000 like with older SoCs by writing 0x16aa0001 to the 90 * undocumented 0x008000e0 SYS_CTRL register. Where the 16aa is a key and 91 * the 1 actually activates the mapping of the first 32 KiB to 0x00000000. 92 */ 93 #define CONFIG_SYS_INIT_RAM_ADDR 0x10000 94 #define CONFIG_SYS_INIT_RAM_SIZE 0x08000 /* FIXME: 40 KiB ? */ 95 #else 96 #define CONFIG_SYS_INIT_RAM_ADDR 0x0 97 #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* 32 KiB */ 98 #endif 99 100 #define CONFIG_SYS_INIT_SP_OFFSET \ 101 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 102 #define CONFIG_SYS_INIT_SP_ADDR \ 103 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 104 105 #define CONFIG_NR_DRAM_BANKS 1 106 #define PHYS_SDRAM_0 CONFIG_SYS_SDRAM_BASE 107 #define PHYS_SDRAM_0_SIZE 0x80000000 /* 2 GiB */ 108 109 #ifdef CONFIG_AHCI 110 #define CONFIG_SCSI_AHCI_PLAT 111 #define CONFIG_SUNXI_AHCI 112 #define CONFIG_SYS_64BIT_LBA 113 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 114 #define CONFIG_SYS_SCSI_MAX_LUN 1 115 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 116 CONFIG_SYS_SCSI_MAX_LUN) 117 #endif 118 119 #define CONFIG_SETUP_MEMORY_TAGS 120 #define CONFIG_CMDLINE_TAG 121 #define CONFIG_INITRD_TAG 122 #define CONFIG_SERIAL_TAG 123 124 #ifdef CONFIG_NAND_SUNXI 125 #define CONFIG_SYS_NAND_MAX_ECCPOS 1664 126 #define CONFIG_SYS_NAND_ONFI_DETECTION 127 #define CONFIG_SYS_MAX_NAND_DEVICE 8 128 #endif 129 130 #ifdef CONFIG_SPL_SPI_SUNXI 131 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 132 #endif 133 134 /* mmc config */ 135 #ifdef CONFIG_MMC 136 #define CONFIG_MMC_SUNXI_SLOT 0 137 #endif 138 139 #if defined(CONFIG_ENV_IS_IN_MMC) 140 141 #ifdef CONFIG_ARM64 142 /* 143 * This is actually (CONFIG_ENV_OFFSET - 144 * (CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)), but the value will be used 145 * directly in a makefile, without the preprocessor expansion. 146 */ 147 #define CONFIG_BOARD_SIZE_LIMIT 0x7e000 148 #endif 149 150 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1 151 /* If we have two devices (most likely eMMC + MMC), favour the eMMC */ 152 #define CONFIG_SYS_MMC_ENV_DEV 1 153 #else 154 /* Otherwise, use the only device we have */ 155 #define CONFIG_SYS_MMC_ENV_DEV 0 156 #endif 157 #define CONFIG_SYS_MMC_MAX_DEVICE 4 158 #elif defined(CONFIG_ENV_IS_NOWHERE) 159 #define CONFIG_ENV_SIZE (128 << 10) 160 #endif 161 162 #ifndef CONFIG_MACH_SUN8I_V3S 163 /* 64MB of malloc() pool */ 164 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (64 << 20)) 165 #else 166 /* 2MB of malloc() pool */ 167 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (2 << 20)) 168 #endif 169 170 /* 171 * Miscellaneous configurable options 172 */ 173 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 174 #define CONFIG_SYS_PBSIZE 1024 /* Print Buffer Size */ 175 176 /* standalone support */ 177 #define CONFIG_STANDALONE_LOAD_ADDR CONFIG_SYS_LOAD_ADDR 178 179 /* FLASH and environment organization */ 180 181 #define CONFIG_SYS_MONITOR_LEN (768 << 10) /* 768 KiB */ 182 183 #ifndef CONFIG_ARM64 /* AArch64 FEL support is not ready yet */ 184 #define CONFIG_SPL_BOARD_LOAD_IMAGE 185 #endif 186 187 #ifdef CONFIG_SUNXI_HIGH_SRAM 188 #define CONFIG_SPL_TEXT_BASE 0x10060 /* sram start+header */ 189 #define CONFIG_SPL_MAX_SIZE 0x7fa0 /* 32 KiB */ 190 #ifdef CONFIG_ARM64 191 /* end of SRAM A2 for now, as SRAM A1 is pretty tight for an ARM64 build */ 192 #define LOW_LEVEL_SRAM_STACK 0x00054000 193 #else 194 #define LOW_LEVEL_SRAM_STACK 0x00018000 195 #endif /* !CONFIG_ARM64 */ 196 #else 197 #define CONFIG_SPL_TEXT_BASE 0x60 /* sram start+header */ 198 #define CONFIG_SPL_MAX_SIZE 0x5fa0 /* 24KB on sun4i/sun7i */ 199 #define LOW_LEVEL_SRAM_STACK 0x00008000 /* End of sram */ 200 #endif 201 202 #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK 203 204 #define CONFIG_SPL_PAD_TO 32768 /* decimal for 'dd' */ 205 206 207 /* I2C */ 208 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \ 209 defined CONFIG_SY8106A_POWER 210 #endif 211 212 #if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \ 213 defined CONFIG_I2C2_ENABLE || defined CONFIG_I2C3_ENABLE || \ 214 defined CONFIG_I2C4_ENABLE || defined CONFIG_R_I2C_ENABLE 215 #define CONFIG_SYS_I2C_MVTWSI 216 #ifndef CONFIG_DM_I2C 217 #define CONFIG_SYS_I2C 218 #define CONFIG_SYS_I2C_SPEED 400000 219 #define CONFIG_SYS_I2C_SLAVE 0x7f 220 #endif 221 #endif 222 223 #if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD) 224 #define CONFIG_SYS_I2C_SOFT 225 #define CONFIG_SYS_I2C_SOFT_SPEED 50000 226 #define CONFIG_SYS_I2C_SOFT_SLAVE 0x00 227 /* We use pin names in Kconfig and sunxi_name_to_gpio() */ 228 #define CONFIG_SOFT_I2C_GPIO_SDA soft_i2c_gpio_sda 229 #define CONFIG_SOFT_I2C_GPIO_SCL soft_i2c_gpio_scl 230 #ifndef __ASSEMBLY__ 231 extern int soft_i2c_gpio_sda; 232 extern int soft_i2c_gpio_scl; 233 #endif 234 #define CONFIG_VIDEO_LCD_I2C_BUS 0 /* The lcd panel soft i2c is bus 0 */ 235 #define CONFIG_SYS_SPD_BUS_NUM 1 /* And the axp209 i2c bus is bus 1 */ 236 #else 237 #define CONFIG_SYS_SPD_BUS_NUM 0 /* The axp209 i2c bus is bus 0 */ 238 #define CONFIG_VIDEO_LCD_I2C_BUS -1 /* NA, but necessary to compile */ 239 #endif 240 241 /* PMU */ 242 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \ 243 defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER || \ 244 defined CONFIG_SY8106A_POWER 245 #endif 246 247 #ifdef CONFIG_REQUIRE_SERIAL_CONSOLE 248 #if CONFIG_CONS_INDEX == 1 249 #ifdef CONFIG_MACH_SUN9I 250 #define OF_STDOUT_PATH "/soc/serial@07000000:115200" 251 #else 252 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28000:115200" 253 #endif 254 #elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I) 255 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28400:115200" 256 #elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I) 257 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28800:115200" 258 #elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I) 259 #define OF_STDOUT_PATH "/soc@01c00000/serial@01f02800:115200" 260 #else 261 #error Unsupported console port nr. Please fix stdout-path in sunxi-common.h. 262 #endif 263 #endif /* ifdef CONFIG_REQUIRE_SERIAL_CONSOLE */ 264 265 /* GPIO */ 266 #define CONFIG_SUNXI_GPIO 267 268 #ifdef CONFIG_VIDEO_SUNXI 269 /* 270 * The amount of RAM to keep free at the top of RAM when relocating u-boot, 271 * to use as framebuffer. This must be a multiple of 4096. 272 */ 273 #define CONFIG_SUNXI_MAX_FB_SIZE (16 << 20) 274 275 #define CONFIG_VIDEO_LOGO 276 #define CONFIG_VIDEO_STD_TIMINGS 277 #define CONFIG_I2C_EDID 278 #define VIDEO_LINE_LEN (pGD->plnSizeX) 279 280 /* allow both serial and cfb console. */ 281 /* stop x86 thinking in cfbconsole from trying to init a pc keyboard */ 282 283 #endif /* CONFIG_VIDEO_SUNXI */ 284 285 /* Ethernet support */ 286 #ifdef CONFIG_SUN4I_EMAC 287 #define CONFIG_MII /* MII PHY management */ 288 #endif 289 290 #ifdef CONFIG_SUN7I_GMAC 291 #define CONFIG_MII /* MII PHY management */ 292 #define CONFIG_PHY_REALTEK 293 #endif 294 295 #ifdef CONFIG_USB_EHCI_HCD 296 #define CONFIG_USB_OHCI_NEW 297 #define CONFIG_USB_OHCI_SUNXI 298 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 299 #endif 300 301 #ifdef CONFIG_USB_KEYBOARD 302 #define CONFIG_PREBOOT 303 #endif 304 305 #define CONFIG_MISC_INIT_R 306 307 #ifndef CONFIG_SPL_BUILD 308 309 #ifdef CONFIG_ARM64 310 /* 311 * Boards seem to come with at least 512MB of DRAM. 312 * The kernel should go at 512K, which is the default text offset (that will 313 * be adjusted at runtime if needed). 314 * There is no compression for arm64 kernels (yet), so leave some space 315 * for really big kernels, say 256MB for now. 316 * Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd. 317 * Align the initrd to a 2MB page. 318 */ 319 #define BOOTM_SIZE __stringify(0xa000000) 320 #define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(0080000)) 321 #define FDT_ADDR_R __stringify(SDRAM_OFFSET(FA00000)) 322 #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(FC00000)) 323 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(FD00000)) 324 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(FE00000)) 325 326 #else 327 /* 328 * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc. 329 * 32M uncompressed kernel, 16M compressed kernel, 1M fdt, 330 * 1M script, 1M pxe and the ramdisk at the end. 331 */ 332 #ifndef CONFIG_MACH_SUN8I_V3S 333 #define BOOTM_SIZE __stringify(0xa000000) 334 #define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(2000000)) 335 #define FDT_ADDR_R __stringify(SDRAM_OFFSET(3000000)) 336 #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(3100000)) 337 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000)) 338 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3300000)) 339 #else 340 /* 341 * 64M RAM minus 2MB heap + 16MB for u-boot, stack, fb, etc. 342 * 16M uncompressed kernel, 8M compressed kernel, 1M fdt, 343 * 1M script, 1M pxe and the ramdisk at the end. 344 */ 345 #define BOOTM_SIZE __stringify(0x2e00000) 346 #define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(1000000)) 347 #define FDT_ADDR_R __stringify(SDRAM_OFFSET(1800000)) 348 #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(1900000)) 349 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(1A00000)) 350 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(1B00000)) 351 #endif 352 #endif 353 354 #define MEM_LAYOUT_ENV_SETTINGS \ 355 "bootm_size=" BOOTM_SIZE "\0" \ 356 "kernel_addr_r=" KERNEL_ADDR_R "\0" \ 357 "fdt_addr_r=" FDT_ADDR_R "\0" \ 358 "scriptaddr=" SCRIPT_ADDR_R "\0" \ 359 "pxefile_addr_r=" PXEFILE_ADDR_R "\0" \ 360 "ramdisk_addr_r=" RAMDISK_ADDR_R "\0" 361 362 #define DFU_ALT_INFO_RAM \ 363 "dfu_alt_info_ram=" \ 364 "kernel ram " KERNEL_ADDR_R " 0x1000000;" \ 365 "fdt ram " FDT_ADDR_R " 0x100000;" \ 366 "ramdisk ram " RAMDISK_ADDR_R " 0x4000000\0" 367 368 #ifdef CONFIG_MMC 369 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1 370 #define BOOTENV_DEV_MMC_AUTO(devtypeu, devtypel, instance) \ 371 BOOTENV_DEV_MMC(MMC, mmc, 0) \ 372 BOOTENV_DEV_MMC(MMC, mmc, 1) \ 373 "bootcmd_mmc_auto=" \ 374 "if test ${mmc_bootdev} -eq 1; then " \ 375 "run bootcmd_mmc1; " \ 376 "run bootcmd_mmc0; " \ 377 "elif test ${mmc_bootdev} -eq 0; then " \ 378 "run bootcmd_mmc0; " \ 379 "run bootcmd_mmc1; " \ 380 "fi\0" 381 382 #define BOOTENV_DEV_NAME_MMC_AUTO(devtypeu, devtypel, instance) \ 383 "mmc_auto " 384 385 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC_AUTO, mmc_auto, na) 386 #else 387 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) 388 #endif 389 #else 390 #define BOOT_TARGET_DEVICES_MMC(func) 391 #endif 392 393 #ifdef CONFIG_AHCI 394 #define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0) 395 #else 396 #define BOOT_TARGET_DEVICES_SCSI(func) 397 #endif 398 399 #ifdef CONFIG_USB_STORAGE 400 #define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) 401 #else 402 #define BOOT_TARGET_DEVICES_USB(func) 403 #endif 404 405 /* FEL boot support, auto-execute boot.scr if a script address was provided */ 406 #define BOOTENV_DEV_FEL(devtypeu, devtypel, instance) \ 407 "bootcmd_fel=" \ 408 "if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then " \ 409 "echo '(FEL boot)'; " \ 410 "source ${fel_scriptaddr}; " \ 411 "fi\0" 412 #define BOOTENV_DEV_NAME_FEL(devtypeu, devtypel, instance) \ 413 "fel " 414 415 #define BOOT_TARGET_DEVICES(func) \ 416 func(FEL, fel, na) \ 417 BOOT_TARGET_DEVICES_MMC(func) \ 418 BOOT_TARGET_DEVICES_SCSI(func) \ 419 BOOT_TARGET_DEVICES_USB(func) \ 420 func(PXE, pxe, na) \ 421 func(DHCP, dhcp, na) 422 423 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT 424 #define BOOTCMD_SUNXI_COMPAT \ 425 "bootcmd_sunxi_compat=" \ 426 "setenv root /dev/mmcblk0p3 rootwait; " \ 427 "if ext2load mmc 0 0x44000000 uEnv.txt; then " \ 428 "echo Loaded environment from uEnv.txt; " \ 429 "env import -t 0x44000000 ${filesize}; " \ 430 "fi; " \ 431 "setenv bootargs console=${console} root=${root} ${extraargs}; " \ 432 "ext2load mmc 0 0x43000000 script.bin && " \ 433 "ext2load mmc 0 0x48000000 uImage && " \ 434 "bootm 0x48000000\0" 435 #else 436 #define BOOTCMD_SUNXI_COMPAT 437 #endif 438 439 #include <config_distro_bootcmd.h> 440 441 #ifdef CONFIG_USB_KEYBOARD 442 #define CONSOLE_STDIN_SETTINGS \ 443 "preboot=usb start\0" \ 444 "stdin=serial,usbkbd\0" 445 #else 446 #define CONSOLE_STDIN_SETTINGS \ 447 "stdin=serial\0" 448 #endif 449 450 #ifdef CONFIG_VIDEO 451 #define CONSOLE_STDOUT_SETTINGS \ 452 "stdout=serial,vga\0" \ 453 "stderr=serial,vga\0" 454 #elif CONFIG_DM_VIDEO 455 #define CONFIG_SYS_WHITE_ON_BLACK 456 #define CONSOLE_STDOUT_SETTINGS \ 457 "stdout=serial,vidconsole\0" \ 458 "stderr=serial,vidconsole\0" 459 #else 460 #define CONSOLE_STDOUT_SETTINGS \ 461 "stdout=serial\0" \ 462 "stderr=serial\0" 463 #endif 464 465 #ifdef CONFIG_MTDIDS_DEFAULT 466 #define SUNXI_MTDIDS_DEFAULT \ 467 "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" 468 #else 469 #define SUNXI_MTDIDS_DEFAULT 470 #endif 471 472 #ifdef CONFIG_MTDPARTS_DEFAULT 473 #define SUNXI_MTDPARTS_DEFAULT \ 474 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" 475 #else 476 #define SUNXI_MTDPARTS_DEFAULT 477 #endif 478 479 #define PARTS_DEFAULT \ 480 "name=loader1,start=8k,size=32k,uuid=${uuid_gpt_loader1};" \ 481 "name=loader2,size=984k,uuid=${uuid_gpt_loader2};" \ 482 "name=esp,size=128M,bootable,uuid=${uuid_gpt_esp};" \ 483 "name=system,size=-,uuid=${uuid_gpt_system};" 484 485 #define UUID_GPT_ESP "c12a7328-f81f-11d2-ba4b-00a0c93ec93b" 486 487 #ifdef CONFIG_ARM64 488 #define UUID_GPT_SYSTEM "b921b045-1df0-41c3-af44-4c6f280d3fae" 489 #else 490 #define UUID_GPT_SYSTEM "69dad710-2ce4-4e3c-b16c-21a1d49abed3" 491 #endif 492 493 #define CONSOLE_ENV_SETTINGS \ 494 CONSOLE_STDIN_SETTINGS \ 495 CONSOLE_STDOUT_SETTINGS 496 497 #ifdef CONFIG_ARM64 498 #define FDTFILE "allwinner/" CONFIG_DEFAULT_DEVICE_TREE ".dtb" 499 #else 500 #define FDTFILE CONFIG_DEFAULT_DEVICE_TREE ".dtb" 501 #endif 502 503 #define CONFIG_EXTRA_ENV_SETTINGS \ 504 CONSOLE_ENV_SETTINGS \ 505 MEM_LAYOUT_ENV_SETTINGS \ 506 DFU_ALT_INFO_RAM \ 507 "fdtfile=" FDTFILE "\0" \ 508 "console=ttyS0,115200\0" \ 509 SUNXI_MTDIDS_DEFAULT \ 510 SUNXI_MTDPARTS_DEFAULT \ 511 "uuid_gpt_esp=" UUID_GPT_ESP "\0" \ 512 "uuid_gpt_system=" UUID_GPT_SYSTEM "\0" \ 513 "partitions=" PARTS_DEFAULT "\0" \ 514 BOOTCMD_SUNXI_COMPAT \ 515 BOOTENV 516 517 #else /* ifndef CONFIG_SPL_BUILD */ 518 #define CONFIG_EXTRA_ENV_SETTINGS 519 #endif 520 521 #endif /* _SUNXI_COMMON_CONFIG_H */ 522