1 /* 2 * (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net> 3 * 4 * (C) Copyright 2007-2011 5 * Allwinner Technology Co., Ltd. <www.allwinnertech.com> 6 * Tom Cubie <tangliang@allwinnertech.com> 7 * 8 * Configuration settings for the Allwinner sunxi series of boards. 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 #ifndef _SUNXI_COMMON_CONFIG_H 14 #define _SUNXI_COMMON_CONFIG_H 15 16 #include <asm/arch/cpu.h> 17 #include <linux/stringify.h> 18 19 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT 20 /* 21 * The U-Boot workarounds bugs in the outdated buggy sunxi-3.4 kernels at the 22 * expense of restricting some features, so the regular machine id values can 23 * be used. 24 */ 25 # define CONFIG_MACH_TYPE_COMPAT_REV 0 26 #else 27 /* 28 * A compatibility guard to prevent loading outdated buggy sunxi-3.4 kernels. 29 * Only sunxi-3.4 kernels with appropriate fixes applied are able to pass 30 * beyond the machine id check. 31 */ 32 # define CONFIG_MACH_TYPE_COMPAT_REV 1 33 #endif 34 35 #ifdef CONFIG_ARM64 36 #define CONFIG_BUILD_TARGET "u-boot.itb" 37 #endif 38 39 /* Serial & console */ 40 #define CONFIG_SYS_NS16550_SERIAL 41 /* ns16550 reg in the low bits of cpu reg */ 42 #define CONFIG_SYS_NS16550_CLK 24000000 43 #ifndef CONFIG_DM_SERIAL 44 # define CONFIG_SYS_NS16550_REG_SIZE -4 45 # define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE 46 # define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE 47 # define CONFIG_SYS_NS16550_COM3 SUNXI_UART2_BASE 48 # define CONFIG_SYS_NS16550_COM4 SUNXI_UART3_BASE 49 # define CONFIG_SYS_NS16550_COM5 SUNXI_R_UART_BASE 50 #endif 51 52 /* CPU */ 53 #define COUNTER_FREQUENCY 24000000 54 55 /* 56 * The DRAM Base differs between some models. We cannot use macros for the 57 * CONFIG_FOO defines which contain the DRAM base address since they end 58 * up unexpanded in include/autoconf.mk . 59 * 60 * So we have to have this #ifdef #else #endif block for these. 61 */ 62 #ifdef CONFIG_MACH_SUN9I 63 #define SDRAM_OFFSET(x) 0x2##x 64 #define CONFIG_SYS_SDRAM_BASE 0x20000000 65 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* default load address */ 66 #define CONFIG_SYS_TEXT_BASE 0x2a000000 67 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here 68 * since it needs to fit in with the other values. By also #defining it 69 * we get warnings if the Kconfig value mismatches. */ 70 #define CONFIG_SPL_STACK_R_ADDR 0x2fe00000 71 #define CONFIG_SPL_BSS_START_ADDR 0x2ff80000 72 #else 73 #define SDRAM_OFFSET(x) 0x4##x 74 #define CONFIG_SYS_SDRAM_BASE 0x40000000 75 #define CONFIG_SYS_LOAD_ADDR 0x42000000 /* default load address */ 76 /* V3s do not have enough memory to place code at 0x4a000000 */ 77 #ifndef CONFIG_MACH_SUN8I_V3S 78 #define CONFIG_SYS_TEXT_BASE 0x4a000000 79 #else 80 #define CONFIG_SYS_TEXT_BASE 0x42e00000 81 #endif 82 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here 83 * since it needs to fit in with the other values. By also #defining it 84 * we get warnings if the Kconfig value mismatches. */ 85 #define CONFIG_SPL_STACK_R_ADDR 0x4fe00000 86 #define CONFIG_SPL_BSS_START_ADDR 0x4ff80000 87 #endif 88 89 #define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 /* 512 KiB */ 90 91 #ifdef CONFIG_SUNXI_HIGH_SRAM 92 /* 93 * The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is 94 * slightly bigger. Note that it is possible to map the first 32 KiB of the 95 * A1 at 0x00000000 like with older SoCs by writing 0x16aa0001 to the 96 * undocumented 0x008000e0 SYS_CTRL register. Where the 16aa is a key and 97 * the 1 actually activates the mapping of the first 32 KiB to 0x00000000. 98 */ 99 #define CONFIG_SYS_INIT_RAM_ADDR 0x10000 100 #define CONFIG_SYS_INIT_RAM_SIZE 0x08000 /* FIXME: 40 KiB ? */ 101 #else 102 #define CONFIG_SYS_INIT_RAM_ADDR 0x0 103 #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* 32 KiB */ 104 #endif 105 106 #define CONFIG_SYS_INIT_SP_OFFSET \ 107 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 108 #define CONFIG_SYS_INIT_SP_ADDR \ 109 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 110 111 #define CONFIG_NR_DRAM_BANKS 1 112 #define PHYS_SDRAM_0 CONFIG_SYS_SDRAM_BASE 113 #define PHYS_SDRAM_0_SIZE 0x80000000 /* 2 GiB */ 114 115 #ifdef CONFIG_AHCI 116 #define CONFIG_LIBATA 117 #define CONFIG_SCSI_AHCI 118 #define CONFIG_SCSI_AHCI_PLAT 119 #define CONFIG_SUNXI_AHCI 120 #define CONFIG_SYS_64BIT_LBA 121 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 122 #define CONFIG_SYS_SCSI_MAX_LUN 1 123 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 124 CONFIG_SYS_SCSI_MAX_LUN) 125 #endif 126 127 #define CONFIG_SETUP_MEMORY_TAGS 128 #define CONFIG_CMDLINE_TAG 129 #define CONFIG_INITRD_TAG 130 #define CONFIG_SERIAL_TAG 131 132 #ifdef CONFIG_NAND_SUNXI 133 #define CONFIG_SYS_NAND_MAX_ECCPOS 1664 134 #define CONFIG_SYS_NAND_ONFI_DETECTION 135 #define CONFIG_SYS_MAX_NAND_DEVICE 8 136 137 #define CONFIG_MTD_DEVICE 138 #define CONFIG_MTD_PARTITIONS 139 #endif 140 141 #ifdef CONFIG_SPL_SPI_SUNXI 142 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 143 #endif 144 145 /* mmc config */ 146 #ifdef CONFIG_MMC 147 #define CONFIG_MMC_SUNXI_SLOT 0 148 #endif 149 150 #if defined(CONFIG_ENV_IS_IN_MMC) 151 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1 152 /* If we have two devices (most likely eMMC + MMC), favour the eMMC */ 153 #define CONFIG_SYS_MMC_ENV_DEV 1 154 #else 155 /* Otherwise, use the only device we have */ 156 #define CONFIG_SYS_MMC_ENV_DEV 0 157 #endif 158 #define CONFIG_SYS_MMC_MAX_DEVICE 4 159 #elif defined(CONFIG_ENV_IS_NOWHERE) 160 #define CONFIG_ENV_SIZE (128 << 10) 161 #endif 162 163 #ifndef CONFIG_MACH_SUN8I_V3S 164 /* 64MB of malloc() pool */ 165 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (64 << 20)) 166 #else 167 /* 2MB of malloc() pool */ 168 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (2 << 20)) 169 #endif 170 171 /* 172 * Miscellaneous configurable options 173 */ 174 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 175 #define CONFIG_SYS_PBSIZE 1024 /* Print Buffer Size */ 176 177 /* standalone support */ 178 #define CONFIG_STANDALONE_LOAD_ADDR CONFIG_SYS_LOAD_ADDR 179 180 /* FLASH and environment organization */ 181 182 #define CONFIG_SYS_MONITOR_LEN (768 << 10) /* 768 KiB */ 183 184 #define CONFIG_SPL_FRAMEWORK 185 186 #ifndef CONFIG_ARM64 /* AArch64 FEL support is not ready yet */ 187 #define CONFIG_SPL_BOARD_LOAD_IMAGE 188 #endif 189 190 #ifdef CONFIG_SUNXI_HIGH_SRAM 191 #define CONFIG_SPL_TEXT_BASE 0x10060 /* sram start+header */ 192 #define CONFIG_SPL_MAX_SIZE 0x7fa0 /* 32 KiB */ 193 #ifdef CONFIG_ARM64 194 /* end of SRAM A2 for now, as SRAM A1 is pretty tight for an ARM64 build */ 195 #define LOW_LEVEL_SRAM_STACK 0x00054000 196 #else 197 #define LOW_LEVEL_SRAM_STACK 0x00018000 198 #endif /* !CONFIG_ARM64 */ 199 #else 200 #define CONFIG_SPL_TEXT_BASE 0x60 /* sram start+header */ 201 #define CONFIG_SPL_MAX_SIZE 0x5fa0 /* 24KB on sun4i/sun7i */ 202 #define LOW_LEVEL_SRAM_STACK 0x00008000 /* End of sram */ 203 #endif 204 205 #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK 206 207 #define CONFIG_SPL_PAD_TO 32768 /* decimal for 'dd' */ 208 209 210 /* I2C */ 211 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \ 212 defined CONFIG_SY8106A_POWER 213 #endif 214 215 #if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \ 216 defined CONFIG_I2C2_ENABLE || defined CONFIG_I2C3_ENABLE || \ 217 defined CONFIG_I2C4_ENABLE || defined CONFIG_R_I2C_ENABLE 218 #define CONFIG_SYS_I2C_MVTWSI 219 #ifndef CONFIG_DM_I2C 220 #define CONFIG_SYS_I2C 221 #define CONFIG_SYS_I2C_SPEED 400000 222 #define CONFIG_SYS_I2C_SLAVE 0x7f 223 #endif 224 #endif 225 226 #if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD) 227 #define CONFIG_SYS_I2C_SOFT 228 #define CONFIG_SYS_I2C_SOFT_SPEED 50000 229 #define CONFIG_SYS_I2C_SOFT_SLAVE 0x00 230 /* We use pin names in Kconfig and sunxi_name_to_gpio() */ 231 #define CONFIG_SOFT_I2C_GPIO_SDA soft_i2c_gpio_sda 232 #define CONFIG_SOFT_I2C_GPIO_SCL soft_i2c_gpio_scl 233 #ifndef __ASSEMBLY__ 234 extern int soft_i2c_gpio_sda; 235 extern int soft_i2c_gpio_scl; 236 #endif 237 #define CONFIG_VIDEO_LCD_I2C_BUS 0 /* The lcd panel soft i2c is bus 0 */ 238 #define CONFIG_SYS_SPD_BUS_NUM 1 /* And the axp209 i2c bus is bus 1 */ 239 #else 240 #define CONFIG_SYS_SPD_BUS_NUM 0 /* The axp209 i2c bus is bus 0 */ 241 #define CONFIG_VIDEO_LCD_I2C_BUS -1 /* NA, but necessary to compile */ 242 #endif 243 244 /* PMU */ 245 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \ 246 defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER || \ 247 defined CONFIG_SY8106A_POWER 248 #endif 249 250 #ifdef CONFIG_REQUIRE_SERIAL_CONSOLE 251 #if CONFIG_CONS_INDEX == 1 252 #ifdef CONFIG_MACH_SUN9I 253 #define OF_STDOUT_PATH "/soc/serial@07000000:115200" 254 #else 255 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28000:115200" 256 #endif 257 #elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I) 258 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28400:115200" 259 #elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I) 260 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28800:115200" 261 #elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I) 262 #define OF_STDOUT_PATH "/soc@01c00000/serial@01f02800:115200" 263 #else 264 #error Unsupported console port nr. Please fix stdout-path in sunxi-common.h. 265 #endif 266 #endif /* ifdef CONFIG_REQUIRE_SERIAL_CONSOLE */ 267 268 /* GPIO */ 269 #define CONFIG_SUNXI_GPIO 270 271 #ifdef CONFIG_VIDEO_SUNXI 272 /* 273 * The amount of RAM to keep free at the top of RAM when relocating u-boot, 274 * to use as framebuffer. This must be a multiple of 4096. 275 */ 276 #define CONFIG_SUNXI_MAX_FB_SIZE (16 << 20) 277 278 #define CONFIG_VIDEO_LOGO 279 #define CONFIG_VIDEO_STD_TIMINGS 280 #define CONFIG_I2C_EDID 281 #define VIDEO_LINE_LEN (pGD->plnSizeX) 282 283 /* allow both serial and cfb console. */ 284 /* stop x86 thinking in cfbconsole from trying to init a pc keyboard */ 285 286 #endif /* CONFIG_VIDEO_SUNXI */ 287 288 /* Ethernet support */ 289 #ifdef CONFIG_SUN4I_EMAC 290 #define CONFIG_PHY_ADDR 1 291 #define CONFIG_MII /* MII PHY management */ 292 #endif 293 294 #ifdef CONFIG_SUN7I_GMAC 295 #define CONFIG_PHY_ADDR 1 296 #define CONFIG_MII /* MII PHY management */ 297 #define CONFIG_PHY_REALTEK 298 #endif 299 300 #ifdef CONFIG_USB_EHCI_HCD 301 #define CONFIG_USB_OHCI_NEW 302 #define CONFIG_USB_OHCI_SUNXI 303 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 304 #endif 305 306 #ifdef CONFIG_USB_MUSB_SUNXI 307 #define CONFIG_USB_MUSB_PIO_ONLY 308 #endif 309 310 #ifdef CONFIG_USB_MUSB_GADGET 311 #define CONFIG_USB_FUNCTION_MASS_STORAGE 312 #endif 313 314 #ifdef CONFIG_USB_FUNCTION_MASS_STORAGE 315 #endif 316 317 #ifdef CONFIG_USB_KEYBOARD 318 #define CONFIG_PREBOOT 319 #endif 320 321 #define CONFIG_MISC_INIT_R 322 323 #ifndef CONFIG_SPL_BUILD 324 #include <config_distro_defaults.h> 325 326 #ifdef CONFIG_ARM64 327 /* 328 * Boards seem to come with at least 512MB of DRAM. 329 * The kernel should go at 512K, which is the default text offset (that will 330 * be adjusted at runtime if needed). 331 * There is no compression for arm64 kernels (yet), so leave some space 332 * for really big kernels, say 256MB for now. 333 * Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd. 334 * Align the initrd to a 2MB page. 335 */ 336 #define BOOTM_SIZE __stringify(0xa000000) 337 #define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(0080000)) 338 #define FDT_ADDR_R __stringify(SDRAM_OFFSET(FA00000)) 339 #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(FC00000)) 340 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(FD00000)) 341 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(FE00000)) 342 343 #else 344 /* 345 * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc. 346 * 32M uncompressed kernel, 16M compressed kernel, 1M fdt, 347 * 1M script, 1M pxe and the ramdisk at the end. 348 */ 349 #ifndef CONFIG_MACH_SUN8I_V3S 350 #define BOOTM_SIZE __stringify(0xa000000) 351 #define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(2000000)) 352 #define FDT_ADDR_R __stringify(SDRAM_OFFSET(3000000)) 353 #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(3100000)) 354 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000)) 355 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3300000)) 356 #else 357 /* 358 * 64M RAM minus 2MB heap + 16MB for u-boot, stack, fb, etc. 359 * 16M uncompressed kernel, 8M compressed kernel, 1M fdt, 360 * 1M script, 1M pxe and the ramdisk at the end. 361 */ 362 #define BOOTM_SIZE __stringify(0x2e00000) 363 #define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(1000000)) 364 #define FDT_ADDR_R __stringify(SDRAM_OFFSET(1800000)) 365 #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(1900000)) 366 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(1A00000)) 367 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(1B00000)) 368 #endif 369 #endif 370 371 #define MEM_LAYOUT_ENV_SETTINGS \ 372 "bootm_size=" BOOTM_SIZE "\0" \ 373 "kernel_addr_r=" KERNEL_ADDR_R "\0" \ 374 "fdt_addr_r=" FDT_ADDR_R "\0" \ 375 "scriptaddr=" SCRIPT_ADDR_R "\0" \ 376 "pxefile_addr_r=" PXEFILE_ADDR_R "\0" \ 377 "ramdisk_addr_r=" RAMDISK_ADDR_R "\0" 378 379 #define DFU_ALT_INFO_RAM \ 380 "dfu_alt_info_ram=" \ 381 "kernel ram " KERNEL_ADDR_R " 0x1000000;" \ 382 "fdt ram " FDT_ADDR_R " 0x100000;" \ 383 "ramdisk ram " RAMDISK_ADDR_R " 0x4000000\0" 384 385 #ifdef CONFIG_MMC 386 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1 387 #define BOOTENV_DEV_MMC_AUTO(devtypeu, devtypel, instance) \ 388 BOOTENV_DEV_MMC(MMC, mmc, 0) \ 389 BOOTENV_DEV_MMC(MMC, mmc, 1) \ 390 "bootcmd_mmc_auto=" \ 391 "if test ${mmc_bootdev} -eq 1; then " \ 392 "run bootcmd_mmc1; " \ 393 "run bootcmd_mmc0; " \ 394 "elif test ${mmc_bootdev} -eq 0; then " \ 395 "run bootcmd_mmc0; " \ 396 "run bootcmd_mmc1; " \ 397 "fi\0" 398 399 #define BOOTENV_DEV_NAME_MMC_AUTO(devtypeu, devtypel, instance) \ 400 "mmc_auto " 401 402 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC_AUTO, mmc_auto, na) 403 #else 404 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) 405 #endif 406 #else 407 #define BOOT_TARGET_DEVICES_MMC(func) 408 #endif 409 410 #ifdef CONFIG_AHCI 411 #define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0) 412 #else 413 #define BOOT_TARGET_DEVICES_SCSI(func) 414 #endif 415 416 #ifdef CONFIG_USB_STORAGE 417 #define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) 418 #else 419 #define BOOT_TARGET_DEVICES_USB(func) 420 #endif 421 422 /* FEL boot support, auto-execute boot.scr if a script address was provided */ 423 #define BOOTENV_DEV_FEL(devtypeu, devtypel, instance) \ 424 "bootcmd_fel=" \ 425 "if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then " \ 426 "echo '(FEL boot)'; " \ 427 "source ${fel_scriptaddr}; " \ 428 "fi\0" 429 #define BOOTENV_DEV_NAME_FEL(devtypeu, devtypel, instance) \ 430 "fel " 431 432 #define BOOT_TARGET_DEVICES(func) \ 433 func(FEL, fel, na) \ 434 BOOT_TARGET_DEVICES_MMC(func) \ 435 BOOT_TARGET_DEVICES_SCSI(func) \ 436 BOOT_TARGET_DEVICES_USB(func) \ 437 func(PXE, pxe, na) \ 438 func(DHCP, dhcp, na) 439 440 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT 441 #define BOOTCMD_SUNXI_COMPAT \ 442 "bootcmd_sunxi_compat=" \ 443 "setenv root /dev/mmcblk0p3 rootwait; " \ 444 "if ext2load mmc 0 0x44000000 uEnv.txt; then " \ 445 "echo Loaded environment from uEnv.txt; " \ 446 "env import -t 0x44000000 ${filesize}; " \ 447 "fi; " \ 448 "setenv bootargs console=${console} root=${root} ${extraargs}; " \ 449 "ext2load mmc 0 0x43000000 script.bin && " \ 450 "ext2load mmc 0 0x48000000 uImage && " \ 451 "bootm 0x48000000\0" 452 #else 453 #define BOOTCMD_SUNXI_COMPAT 454 #endif 455 456 #include <config_distro_bootcmd.h> 457 458 #ifdef CONFIG_USB_KEYBOARD 459 #define CONSOLE_STDIN_SETTINGS \ 460 "preboot=usb start\0" \ 461 "stdin=serial,usbkbd\0" 462 #else 463 #define CONSOLE_STDIN_SETTINGS \ 464 "stdin=serial\0" 465 #endif 466 467 #ifdef CONFIG_VIDEO 468 #define CONSOLE_STDOUT_SETTINGS \ 469 "stdout=serial,vga\0" \ 470 "stderr=serial,vga\0" 471 #elif CONFIG_DM_VIDEO 472 #define CONFIG_SYS_WHITE_ON_BLACK 473 #define CONSOLE_STDOUT_SETTINGS \ 474 "stdout=serial,vidconsole\0" \ 475 "stderr=serial,vidconsole\0" 476 #else 477 #define CONSOLE_STDOUT_SETTINGS \ 478 "stdout=serial\0" \ 479 "stderr=serial\0" 480 #endif 481 482 #ifdef CONFIG_MTDIDS_DEFAULT 483 #define SUNXI_MTDIDS_DEFAULT \ 484 "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" 485 #else 486 #define SUNXI_MTDIDS_DEFAULT 487 #endif 488 489 #ifdef CONFIG_MTDPARTS_DEFAULT 490 #define SUNXI_MTDPARTS_DEFAULT \ 491 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" 492 #else 493 #define SUNXI_MTDPARTS_DEFAULT 494 #endif 495 496 #define CONSOLE_ENV_SETTINGS \ 497 CONSOLE_STDIN_SETTINGS \ 498 CONSOLE_STDOUT_SETTINGS 499 500 #ifdef CONFIG_ARM64 501 #define FDTFILE "allwinner/" CONFIG_DEFAULT_DEVICE_TREE ".dtb" 502 #else 503 #define FDTFILE CONFIG_DEFAULT_DEVICE_TREE ".dtb" 504 #endif 505 506 #define CONFIG_EXTRA_ENV_SETTINGS \ 507 CONSOLE_ENV_SETTINGS \ 508 MEM_LAYOUT_ENV_SETTINGS \ 509 DFU_ALT_INFO_RAM \ 510 "fdtfile=" FDTFILE "\0" \ 511 "console=ttyS0,115200\0" \ 512 SUNXI_MTDIDS_DEFAULT \ 513 SUNXI_MTDPARTS_DEFAULT \ 514 BOOTCMD_SUNXI_COMPAT \ 515 BOOTENV 516 517 #else /* ifndef CONFIG_SPL_BUILD */ 518 #define CONFIG_EXTRA_ENV_SETTINGS 519 #endif 520 521 #endif /* _SUNXI_COMMON_CONFIG_H */ 522