1 /* 2 * (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net> 3 * 4 * (C) Copyright 2007-2011 5 * Allwinner Technology Co., Ltd. <www.allwinnertech.com> 6 * Tom Cubie <tangliang@allwinnertech.com> 7 * 8 * Configuration settings for the Allwinner sunxi series of boards. 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 #ifndef _SUNXI_COMMON_CONFIG_H 14 #define _SUNXI_COMMON_CONFIG_H 15 16 #include <asm/arch/cpu.h> 17 #include <linux/stringify.h> 18 19 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT 20 /* 21 * The U-Boot workarounds bugs in the outdated buggy sunxi-3.4 kernels at the 22 * expense of restricting some features, so the regular machine id values can 23 * be used. 24 */ 25 # define CONFIG_MACH_TYPE_COMPAT_REV 0 26 #else 27 /* 28 * A compatibility guard to prevent loading outdated buggy sunxi-3.4 kernels. 29 * Only sunxi-3.4 kernels with appropriate fixes applied are able to pass 30 * beyond the machine id check. 31 */ 32 # define CONFIG_MACH_TYPE_COMPAT_REV 1 33 #endif 34 35 /* 36 * High Level Configuration Options 37 */ 38 #define CONFIG_SUNXI /* sunxi family */ 39 #ifdef CONFIG_SPL_BUILD 40 #define CONFIG_SYS_THUMB_BUILD /* Thumbs mode to save space in SPL */ 41 #endif 42 43 /* Serial & console */ 44 #define CONFIG_SYS_NS16550_SERIAL 45 /* ns16550 reg in the low bits of cpu reg */ 46 #define CONFIG_SYS_NS16550_CLK 24000000 47 #ifndef CONFIG_DM_SERIAL 48 # define CONFIG_SYS_NS16550_REG_SIZE -4 49 # define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE 50 # define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE 51 # define CONFIG_SYS_NS16550_COM3 SUNXI_UART2_BASE 52 # define CONFIG_SYS_NS16550_COM4 SUNXI_UART3_BASE 53 # define CONFIG_SYS_NS16550_COM5 SUNXI_R_UART_BASE 54 #endif 55 56 /* CPU */ 57 #define CONFIG_DISPLAY_CPUINFO 58 #define CONFIG_SYS_CACHELINE_SIZE 64 59 #define CONFIG_TIMER_CLK_FREQ 24000000 60 61 /* 62 * The DRAM Base differs between some models. We cannot use macros for the 63 * CONFIG_FOO defines which contain the DRAM base address since they end 64 * up unexpanded in include/autoconf.mk . 65 * 66 * So we have to have this #ifdef #else #endif block for these. 67 */ 68 #ifdef CONFIG_MACH_SUN9I 69 #define SDRAM_OFFSET(x) 0x2##x 70 #define CONFIG_SYS_SDRAM_BASE 0x20000000 71 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* default load address */ 72 #define CONFIG_SYS_TEXT_BASE 0x2a000000 73 #define CONFIG_PRE_CON_BUF_ADDR 0x2f000000 74 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here 75 * since it needs to fit in with the other values. By also #defining it 76 * we get warnings if the Kconfig value mismatches. */ 77 #define CONFIG_SPL_STACK_R_ADDR 0x2fe00000 78 #define CONFIG_SPL_BSS_START_ADDR 0x2ff80000 79 #else 80 #define SDRAM_OFFSET(x) 0x4##x 81 #define CONFIG_SYS_SDRAM_BASE 0x40000000 82 #define CONFIG_SYS_LOAD_ADDR 0x42000000 /* default load address */ 83 #define CONFIG_SYS_TEXT_BASE 0x4a000000 84 #define CONFIG_PRE_CON_BUF_ADDR 0x4f000000 85 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here 86 * since it needs to fit in with the other values. By also #defining it 87 * we get warnings if the Kconfig value mismatches. */ 88 #define CONFIG_SPL_STACK_R_ADDR 0x4fe00000 89 #define CONFIG_SPL_BSS_START_ADDR 0x4ff80000 90 #endif 91 92 #define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 /* 512 KiB */ 93 94 #if defined(CONFIG_MACH_SUN9I) || defined(CONFIG_MACH_SUN50I) 95 /* 96 * The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is 97 * slightly bigger. Note that it is possible to map the first 32 KiB of the 98 * A1 at 0x00000000 like with older SoCs by writing 0x16aa0001 to the 99 * undocumented 0x008000e0 SYS_CTRL register. Where the 16aa is a key and 100 * the 1 actually activates the mapping of the first 32 KiB to 0x00000000. 101 */ 102 #define CONFIG_SYS_INIT_RAM_ADDR 0x10000 103 #define CONFIG_SYS_INIT_RAM_SIZE 0xA000 /* 40 KiB */ 104 #else 105 #define CONFIG_SYS_INIT_RAM_ADDR 0x0 106 #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* 32 KiB */ 107 #endif 108 109 #define CONFIG_SYS_INIT_SP_OFFSET \ 110 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 111 #define CONFIG_SYS_INIT_SP_ADDR \ 112 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 113 114 #define CONFIG_NR_DRAM_BANKS 1 115 #define PHYS_SDRAM_0 CONFIG_SYS_SDRAM_BASE 116 #define PHYS_SDRAM_0_SIZE 0x80000000 /* 2 GiB */ 117 118 #ifdef CONFIG_AHCI 119 #define CONFIG_LIBATA 120 #define CONFIG_SCSI_AHCI 121 #define CONFIG_SCSI_AHCI_PLAT 122 #define CONFIG_SUNXI_AHCI 123 #define CONFIG_SYS_64BIT_LBA 124 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 125 #define CONFIG_SYS_SCSI_MAX_LUN 1 126 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 127 CONFIG_SYS_SCSI_MAX_LUN) 128 #define CONFIG_SCSI 129 #endif 130 131 #define CONFIG_SETUP_MEMORY_TAGS 132 #define CONFIG_CMDLINE_TAG 133 #define CONFIG_INITRD_TAG 134 #define CONFIG_SERIAL_TAG 135 136 #ifdef CONFIG_NAND_SUNXI 137 #define CONFIG_SPL_NAND_SUPPORT 1 138 #endif 139 140 /* mmc config */ 141 #ifdef CONFIG_MMC 142 #define CONFIG_GENERIC_MMC 143 #define CONFIG_MMC_SUNXI 144 #define CONFIG_MMC_SUNXI_SLOT 0 145 #define CONFIG_ENV_IS_IN_MMC 146 #define CONFIG_SYS_MMC_ENV_DEV 0 /* first detected MMC controller */ 147 #endif 148 149 /* 64MB of malloc() pool */ 150 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (64 << 20)) 151 152 /* 153 * Miscellaneous configurable options 154 */ 155 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 156 #define CONFIG_SYS_PBSIZE 1024 /* Print Buffer Size */ 157 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 158 159 /* Boot Argument Buffer Size */ 160 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 161 162 /* standalone support */ 163 #define CONFIG_STANDALONE_LOAD_ADDR CONFIG_SYS_LOAD_ADDR 164 165 /* baudrate */ 166 #define CONFIG_BAUDRATE 115200 167 168 /* The stack sizes are set up in start.S using the settings below */ 169 #define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */ 170 171 /* FLASH and environment organization */ 172 173 #define CONFIG_SYS_NO_FLASH 174 175 #define CONFIG_SYS_MONITOR_LEN (768 << 10) /* 768 KiB */ 176 #define CONFIG_IDENT_STRING " Allwinner Technology" 177 #define CONFIG_DISPLAY_BOARDINFO 178 179 #define CONFIG_ENV_OFFSET (544 << 10) /* (8 + 24 + 512) KiB */ 180 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ 181 182 #define CONFIG_FAT_WRITE /* enable write access */ 183 184 #define CONFIG_SPL_FRAMEWORK 185 #define CONFIG_SPL_LIBCOMMON_SUPPORT 186 #define CONFIG_SPL_SERIAL_SUPPORT 187 #define CONFIG_SPL_LIBGENERIC_SUPPORT 188 189 #define CONFIG_SPL_BOARD_LOAD_IMAGE 190 191 #if defined(CONFIG_MACH_SUN9I) 192 #define CONFIG_SPL_TEXT_BASE 0x10040 /* sram start+header */ 193 #define CONFIG_SPL_MAX_SIZE 0x5fc0 /* ? KiB on sun9i */ 194 #elif defined(CONFIG_MACH_SUN50I) 195 #define CONFIG_SPL_TEXT_BASE 0x10040 /* sram start+header */ 196 #define CONFIG_SPL_MAX_SIZE 0x7fc0 /* 32 KiB on sun50i */ 197 #else 198 #define CONFIG_SPL_TEXT_BASE 0x40 /* sram start+header */ 199 #define CONFIG_SPL_MAX_SIZE 0x5fc0 /* 24KB on sun4i/sun7i */ 200 #endif 201 202 #define CONFIG_SPL_LIBDISK_SUPPORT 203 204 #ifdef CONFIG_MMC 205 #define CONFIG_SPL_MMC_SUPPORT 206 #endif 207 208 #ifndef CONFIG_ARM64 209 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds" 210 #endif 211 212 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 80 /* 40KiB */ 213 #define CONFIG_SPL_PAD_TO 32768 /* decimal for 'dd' */ 214 215 #if defined(CONFIG_MACH_SUN9I) || defined(CONFIG_MACH_SUN50I) 216 #define LOW_LEVEL_SRAM_STACK 0x0001A000 217 #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK 218 #else 219 /* end of 32 KiB in sram */ 220 #define LOW_LEVEL_SRAM_STACK 0x00008000 /* End of sram */ 221 #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK 222 #endif 223 224 /* I2C */ 225 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \ 226 defined CONFIG_SY8106A_POWER 227 #define CONFIG_SPL_I2C_SUPPORT 228 #endif 229 230 #if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \ 231 defined CONFIG_I2C2_ENABLE || defined CONFIG_I2C3_ENABLE || \ 232 defined CONFIG_I2C4_ENABLE || defined CONFIG_R_I2C_ENABLE 233 #define CONFIG_SYS_I2C 234 #define CONFIG_SYS_I2C_MVTWSI 235 #define CONFIG_SYS_I2C_SPEED 400000 236 #define CONFIG_SYS_I2C_SLAVE 0x7f 237 #endif 238 239 #if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD) 240 #define CONFIG_SYS_I2C_SOFT 241 #define CONFIG_SYS_I2C_SOFT_SPEED 50000 242 #define CONFIG_SYS_I2C_SOFT_SLAVE 0x00 243 /* We use pin names in Kconfig and sunxi_name_to_gpio() */ 244 #define CONFIG_SOFT_I2C_GPIO_SDA soft_i2c_gpio_sda 245 #define CONFIG_SOFT_I2C_GPIO_SCL soft_i2c_gpio_scl 246 #ifndef __ASSEMBLY__ 247 extern int soft_i2c_gpio_sda; 248 extern int soft_i2c_gpio_scl; 249 #endif 250 #define CONFIG_VIDEO_LCD_I2C_BUS 0 /* The lcd panel soft i2c is bus 0 */ 251 #define CONFIG_SYS_SPD_BUS_NUM 1 /* And the axp209 i2c bus is bus 1 */ 252 #else 253 #define CONFIG_SYS_SPD_BUS_NUM 0 /* The axp209 i2c bus is bus 0 */ 254 #define CONFIG_VIDEO_LCD_I2C_BUS -1 /* NA, but necessary to compile */ 255 #endif 256 257 /* PMU */ 258 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \ 259 defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER || \ 260 defined CONFIG_SY8106A_POWER 261 #define CONFIG_SPL_POWER_SUPPORT 262 #endif 263 264 #ifndef CONFIG_CONS_INDEX 265 #define CONFIG_CONS_INDEX 1 /* UART0 */ 266 #endif 267 268 #ifdef CONFIG_REQUIRE_SERIAL_CONSOLE 269 #if CONFIG_CONS_INDEX == 1 270 #ifdef CONFIG_MACH_SUN9I 271 #define OF_STDOUT_PATH "/soc/serial@07000000:115200" 272 #else 273 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28000:115200" 274 #endif 275 #elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I) 276 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28400:115200" 277 #elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I) 278 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28800:115200" 279 #elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I) 280 #define OF_STDOUT_PATH "/soc@01c00000/serial@01f02800:115200" 281 #else 282 #error Unsupported console port nr. Please fix stdout-path in sunxi-common.h. 283 #endif 284 #endif /* ifdef CONFIG_REQUIRE_SERIAL_CONSOLE */ 285 286 /* GPIO */ 287 #define CONFIG_SUNXI_GPIO 288 #define CONFIG_SPL_GPIO_SUPPORT 289 290 #ifdef CONFIG_VIDEO 291 /* 292 * The amount of RAM to keep free at the top of RAM when relocating u-boot, 293 * to use as framebuffer. This must be a multiple of 4096. 294 */ 295 #define CONFIG_SUNXI_MAX_FB_SIZE (16 << 20) 296 297 /* Do we want to initialize a simple FB? */ 298 #define CONFIG_VIDEO_DT_SIMPLEFB 299 300 #define CONFIG_VIDEO_SUNXI 301 302 #define CONFIG_CFB_CONSOLE 303 #define CONFIG_VIDEO_SW_CURSOR 304 #define CONFIG_VIDEO_LOGO 305 #define CONFIG_VIDEO_STD_TIMINGS 306 #define CONFIG_I2C_EDID 307 #define VIDEO_LINE_LEN (pGD->plnSizeX) 308 309 /* allow both serial and cfb console. */ 310 #define CONFIG_CONSOLE_MUX 311 /* stop x86 thinking in cfbconsole from trying to init a pc keyboard */ 312 #define CONFIG_VGA_AS_SINGLE_DEVICE 313 314 #endif /* CONFIG_VIDEO */ 315 316 /* Ethernet support */ 317 #ifdef CONFIG_SUNXI_EMAC 318 #define CONFIG_PHY_ADDR 1 319 #define CONFIG_MII /* MII PHY management */ 320 #define CONFIG_PHYLIB 321 #endif 322 323 #ifdef CONFIG_SUNXI_GMAC 324 #define CONFIG_PHY_GIGE /* GMAC can use gigabit PHY */ 325 #define CONFIG_PHY_ADDR 1 326 #define CONFIG_MII /* MII PHY management */ 327 #define CONFIG_PHY_REALTEK 328 #endif 329 330 #ifdef CONFIG_USB_EHCI_HCD 331 #define CONFIG_USB_OHCI_NEW 332 #define CONFIG_USB_OHCI_SUNXI 333 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 334 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1 335 #endif 336 337 #ifdef CONFIG_USB_MUSB_SUNXI 338 #define CONFIG_USB_MUSB_PIO_ONLY 339 #endif 340 341 #ifdef CONFIG_USB_MUSB_GADGET 342 #define CONFIG_USB_FUNCTION_DFU 343 #define CONFIG_USB_FUNCTION_FASTBOOT 344 #define CONFIG_USB_FUNCTION_MASS_STORAGE 345 #endif 346 347 #ifdef CONFIG_USB_FUNCTION_DFU 348 #define CONFIG_DFU_RAM 349 #endif 350 351 #ifdef CONFIG_USB_FUNCTION_FASTBOOT 352 #define CONFIG_CMD_FASTBOOT 353 #define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR 354 #define CONFIG_FASTBOOT_BUF_SIZE 0x2000000 355 #define CONFIG_ANDROID_BOOT_IMAGE 356 357 #define CONFIG_FASTBOOT_FLASH 358 359 #ifdef CONFIG_MMC 360 #define CONFIG_FASTBOOT_FLASH_MMC_DEV 0 361 #define CONFIG_EFI_PARTITION 362 #endif 363 #endif 364 365 #ifdef CONFIG_USB_FUNCTION_MASS_STORAGE 366 #endif 367 368 #ifdef CONFIG_USB_KEYBOARD 369 #define CONFIG_CONSOLE_MUX 370 #define CONFIG_PREBOOT 371 #define CONFIG_SYS_STDIO_DEREGISTER 372 #define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE 373 #endif 374 375 #if !defined CONFIG_ENV_IS_IN_MMC && \ 376 !defined CONFIG_ENV_IS_IN_NAND && \ 377 !defined CONFIG_ENV_IS_IN_FAT && \ 378 !defined CONFIG_ENV_IS_IN_SPI_FLASH 379 #define CONFIG_ENV_IS_NOWHERE 380 #endif 381 382 #define CONFIG_MISC_INIT_R 383 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 384 385 #ifndef CONFIG_SPL_BUILD 386 #include <config_distro_defaults.h> 387 388 /* Enable pre-console buffer to get complete log on the VGA console */ 389 #define CONFIG_PRE_CONSOLE_BUFFER 390 #define CONFIG_PRE_CON_BUF_SZ 4096 /* Aprox 2 80*25 screens */ 391 392 #ifdef CONFIG_ARM64 393 /* 394 * Boards seem to come with at least 512MB of DRAM. 395 * The kernel should go at 512K, which is the default text offset (that will 396 * be adjusted at runtime if needed). 397 * There is no compression for arm64 kernels (yet), so leave some space 398 * for really big kernels, say 256MB for now. 399 * Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd. 400 * Align the initrd to a 2MB page. 401 */ 402 #define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(0080000)) 403 #define FDT_ADDR_R __stringify(SDRAM_OFFSET(FA00000)) 404 #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(FC00000)) 405 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(FD00000)) 406 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(FE00000)) 407 408 #else 409 /* 410 * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc. 411 * 32M uncompressed kernel, 16M compressed kernel, 1M fdt, 412 * 1M script, 1M pxe and the ramdisk at the end. 413 */ 414 415 #define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(2000000)) 416 #define FDT_ADDR_R __stringify(SDRAM_OFFSET(3000000)) 417 #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(3100000)) 418 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000)) 419 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3300000)) 420 #endif 421 422 #define MEM_LAYOUT_ENV_SETTINGS \ 423 "bootm_size=0xa000000\0" \ 424 "kernel_addr_r=" KERNEL_ADDR_R "\0" \ 425 "fdt_addr_r=" FDT_ADDR_R "\0" \ 426 "scriptaddr=" SCRIPT_ADDR_R "\0" \ 427 "pxefile_addr_r=" PXEFILE_ADDR_R "\0" \ 428 "ramdisk_addr_r=" RAMDISK_ADDR_R "\0" 429 430 #define DFU_ALT_INFO_RAM \ 431 "dfu_alt_info_ram=" \ 432 "kernel ram " KERNEL_ADDR_R " 0x1000000;" \ 433 "fdt ram " FDT_ADDR_R " 0x100000;" \ 434 "ramdisk ram " RAMDISK_ADDR_R " 0x4000000\0" 435 436 #ifdef CONFIG_MMC 437 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) 438 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1 439 #define BOOT_TARGET_DEVICES_MMC_EXTRA(func) func(MMC, mmc, 1) 440 #else 441 #define BOOT_TARGET_DEVICES_MMC_EXTRA(func) 442 #endif 443 #else 444 #define BOOT_TARGET_DEVICES_MMC(func) 445 #define BOOT_TARGET_DEVICES_MMC_EXTRA(func) 446 #endif 447 448 #ifdef CONFIG_AHCI 449 #define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0) 450 #else 451 #define BOOT_TARGET_DEVICES_SCSI(func) 452 #endif 453 454 #ifdef CONFIG_USB_STORAGE 455 #define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) 456 #else 457 #define BOOT_TARGET_DEVICES_USB(func) 458 #endif 459 460 /* FEL boot support, auto-execute boot.scr if a script address was provided */ 461 #define BOOTENV_DEV_FEL(devtypeu, devtypel, instance) \ 462 "bootcmd_fel=" \ 463 "if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then " \ 464 "echo '(FEL boot)'; " \ 465 "source ${fel_scriptaddr}; " \ 466 "fi\0" 467 #define BOOTENV_DEV_NAME_FEL(devtypeu, devtypel, instance) \ 468 "fel " 469 470 #define BOOT_TARGET_DEVICES(func) \ 471 func(FEL, fel, na) \ 472 BOOT_TARGET_DEVICES_MMC(func) \ 473 BOOT_TARGET_DEVICES_MMC_EXTRA(func) \ 474 BOOT_TARGET_DEVICES_SCSI(func) \ 475 BOOT_TARGET_DEVICES_USB(func) \ 476 func(PXE, pxe, na) \ 477 func(DHCP, dhcp, na) 478 479 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT 480 #define BOOTCMD_SUNXI_COMPAT \ 481 "bootcmd_sunxi_compat=" \ 482 "setenv root /dev/mmcblk0p3 rootwait; " \ 483 "if ext2load mmc 0 0x44000000 uEnv.txt; then " \ 484 "echo Loaded environment from uEnv.txt; " \ 485 "env import -t 0x44000000 ${filesize}; " \ 486 "fi; " \ 487 "setenv bootargs console=${console} root=${root} ${extraargs}; " \ 488 "ext2load mmc 0 0x43000000 script.bin && " \ 489 "ext2load mmc 0 0x48000000 uImage && " \ 490 "bootm 0x48000000\0" 491 #else 492 #define BOOTCMD_SUNXI_COMPAT 493 #endif 494 495 #include <config_distro_bootcmd.h> 496 497 #ifdef CONFIG_USB_KEYBOARD 498 #define CONSOLE_STDIN_SETTINGS \ 499 "preboot=usb start\0" \ 500 "stdin=serial,usbkbd\0" 501 #else 502 #define CONSOLE_STDIN_SETTINGS \ 503 "stdin=serial\0" 504 #endif 505 506 #ifdef CONFIG_VIDEO 507 #define CONSOLE_STDOUT_SETTINGS \ 508 "stdout=serial,vga\0" \ 509 "stderr=serial,vga\0" 510 #else 511 #define CONSOLE_STDOUT_SETTINGS \ 512 "stdout=serial\0" \ 513 "stderr=serial\0" 514 #endif 515 516 #define CONSOLE_ENV_SETTINGS \ 517 CONSOLE_STDIN_SETTINGS \ 518 CONSOLE_STDOUT_SETTINGS 519 520 #define CONFIG_EXTRA_ENV_SETTINGS \ 521 CONSOLE_ENV_SETTINGS \ 522 MEM_LAYOUT_ENV_SETTINGS \ 523 DFU_ALT_INFO_RAM \ 524 "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \ 525 "console=ttyS0,115200\0" \ 526 BOOTCMD_SUNXI_COMPAT \ 527 BOOTENV 528 529 #else /* ifndef CONFIG_SPL_BUILD */ 530 #define CONFIG_EXTRA_ENV_SETTINGS 531 #endif 532 533 #endif /* _SUNXI_COMMON_CONFIG_H */ 534