1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net>
4  *
5  * (C) Copyright 2007-2011
6  * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
7  * Tom Cubie <tangliang@allwinnertech.com>
8  *
9  * Configuration settings for the Allwinner sunxi series of boards.
10  */
11 
12 #ifndef _SUNXI_COMMON_CONFIG_H
13 #define _SUNXI_COMMON_CONFIG_H
14 
15 #include <asm/arch/cpu.h>
16 #include <linux/stringify.h>
17 
18 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
19 /*
20  * The U-Boot workarounds bugs in the outdated buggy sunxi-3.4 kernels at the
21  * expense of restricting some features, so the regular machine id values can
22  * be used.
23  */
24 # define CONFIG_MACH_TYPE_COMPAT_REV	0
25 #else
26 /*
27  * A compatibility guard to prevent loading outdated buggy sunxi-3.4 kernels.
28  * Only sunxi-3.4 kernels with appropriate fixes applied are able to pass
29  * beyond the machine id check.
30  */
31 # define CONFIG_MACH_TYPE_COMPAT_REV	1
32 #endif
33 
34 #ifdef CONFIG_ARM64
35 #define CONFIG_BUILD_TARGET "u-boot.itb"
36 #define CONFIG_SYS_BOOTM_LEN		(32 << 20)
37 #endif
38 
39 /* Serial & console */
40 #define CONFIG_SYS_NS16550_SERIAL
41 /* ns16550 reg in the low bits of cpu reg */
42 #define CONFIG_SYS_NS16550_CLK		24000000
43 #ifndef CONFIG_DM_SERIAL
44 # define CONFIG_SYS_NS16550_REG_SIZE	-4
45 # define CONFIG_SYS_NS16550_COM1		SUNXI_UART0_BASE
46 # define CONFIG_SYS_NS16550_COM2		SUNXI_UART1_BASE
47 # define CONFIG_SYS_NS16550_COM3		SUNXI_UART2_BASE
48 # define CONFIG_SYS_NS16550_COM4		SUNXI_UART3_BASE
49 # define CONFIG_SYS_NS16550_COM5		SUNXI_R_UART_BASE
50 #endif
51 
52 /* CPU */
53 #define COUNTER_FREQUENCY		24000000
54 
55 /*
56  * The DRAM Base differs between some models. We cannot use macros for the
57  * CONFIG_FOO defines which contain the DRAM base address since they end
58  * up unexpanded in include/autoconf.mk .
59  *
60  * So we have to have this #ifdef #else #endif block for these.
61  */
62 #ifdef CONFIG_MACH_SUN9I
63 #define SDRAM_OFFSET(x) 0x2##x
64 #define CONFIG_SYS_SDRAM_BASE		0x20000000
65 #define CONFIG_SYS_LOAD_ADDR		0x22000000 /* default load address */
66 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
67  * since it needs to fit in with the other values. By also #defining it
68  * we get warnings if the Kconfig value mismatches. */
69 #define CONFIG_SPL_STACK_R_ADDR		0x2fe00000
70 #define CONFIG_SPL_BSS_START_ADDR	0x2ff80000
71 #else
72 #define SDRAM_OFFSET(x) 0x4##x
73 #define CONFIG_SYS_SDRAM_BASE		0x40000000
74 #define CONFIG_SYS_LOAD_ADDR		0x42000000 /* default load address */
75 /* V3s do not have enough memory to place code at 0x4a000000 */
76 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
77  * since it needs to fit in with the other values. By also #defining it
78  * we get warnings if the Kconfig value mismatches. */
79 #define CONFIG_SPL_STACK_R_ADDR		0x4fe00000
80 #define CONFIG_SPL_BSS_START_ADDR	0x4ff80000
81 #endif
82 
83 #define CONFIG_SPL_BSS_MAX_SIZE		0x00080000 /* 512 KiB */
84 
85 /*
86  * The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is
87  * slightly bigger. Note that it is possible to map the first 32 KiB of the
88  * A1 at 0x00000000 like with older SoCs by writing 0x16aa0001 to the
89  * undocumented 0x008000e0 SYS_CTRL register. Where the 16aa is a key and
90  * the 1 actually activates the mapping of the first 32 KiB to 0x00000000.
91  * A64 and H5 also has SRAM A1 at 0x00010000, but no magic remap register
92  * is known yet.
93  * H6 has SRAM A1 at 0x00020000.
94  */
95 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SUNXI_SRAM_ADDRESS
96 /* FIXME: this may be larger on some SoCs */
97 #define CONFIG_SYS_INIT_RAM_SIZE	0x8000 /* 32 KiB */
98 
99 #define CONFIG_SYS_INIT_SP_OFFSET \
100 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
101 #define CONFIG_SYS_INIT_SP_ADDR \
102 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
103 
104 #define PHYS_SDRAM_0			CONFIG_SYS_SDRAM_BASE
105 #define PHYS_SDRAM_0_SIZE		0x80000000 /* 2 GiB */
106 
107 #ifdef CONFIG_AHCI
108 #define CONFIG_SCSI_AHCI_PLAT
109 #define CONFIG_SUNXI_AHCI
110 #define CONFIG_SYS_64BIT_LBA
111 #define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
112 #define CONFIG_SYS_SCSI_MAX_LUN		1
113 #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
114 					 CONFIG_SYS_SCSI_MAX_LUN)
115 #endif
116 
117 #define CONFIG_SETUP_MEMORY_TAGS
118 #define CONFIG_CMDLINE_TAG
119 #define CONFIG_INITRD_TAG
120 #define CONFIG_SERIAL_TAG
121 
122 #ifdef CONFIG_NAND_SUNXI
123 #define CONFIG_SYS_NAND_MAX_ECCPOS 1664
124 #define CONFIG_SYS_NAND_ONFI_DETECTION
125 #define CONFIG_SYS_MAX_NAND_DEVICE 8
126 #endif
127 
128 #ifdef CONFIG_SPL_SPI_SUNXI
129 #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x8000
130 #endif
131 
132 /* mmc config */
133 #ifdef CONFIG_MMC
134 #define CONFIG_MMC_SUNXI_SLOT		0
135 #endif
136 
137 #if defined(CONFIG_ENV_IS_IN_MMC)
138 
139 #ifdef CONFIG_ARM64
140 /*
141  * This is actually (CONFIG_ENV_OFFSET -
142  * (CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)), but the value will be used
143  * directly in a makefile, without the preprocessor expansion.
144  */
145 #define CONFIG_BOARD_SIZE_LIMIT		0x7e000
146 #endif
147 
148 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1
149 /* If we have two devices (most likely eMMC + MMC), favour the eMMC */
150 #define CONFIG_SYS_MMC_ENV_DEV		1
151 #else
152 /* Otherwise, use the only device we have */
153 #define CONFIG_SYS_MMC_ENV_DEV		0
154 #endif
155 #define CONFIG_SYS_MMC_MAX_DEVICE	4
156 #endif
157 
158 #ifndef CONFIG_MACH_SUN8I_V3S
159 /* 64MB of malloc() pool */
160 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (64 << 20))
161 #else
162 /* 2MB of malloc() pool */
163 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (2 << 20))
164 #endif
165 
166 /*
167  * Miscellaneous configurable options
168  */
169 #define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size */
170 #define CONFIG_SYS_PBSIZE	1024	/* Print Buffer Size */
171 
172 /* standalone support */
173 #define CONFIG_STANDALONE_LOAD_ADDR	CONFIG_SYS_LOAD_ADDR
174 
175 /* FLASH and environment organization */
176 
177 #define CONFIG_SYS_MONITOR_LEN		(768 << 10)	/* 768 KiB */
178 
179 #ifndef CONFIG_ARM64		/* AArch64 FEL support is not ready yet */
180 #define CONFIG_SPL_BOARD_LOAD_IMAGE
181 #endif
182 
183 /*
184  * We cannot use expressions here, because expressions won't be evaluated in
185  * autoconf.mk.
186  */
187 #if CONFIG_SUNXI_SRAM_ADDRESS == 0x10000
188 #define CONFIG_SPL_TEXT_BASE		0x10060		/* sram start+header */
189 #define CONFIG_SPL_MAX_SIZE		0x7fa0		/* 32 KiB */
190 #ifdef CONFIG_ARM64
191 /* end of SRAM A2 for now, as SRAM A1 is pretty tight for an ARM64 build */
192 #define LOW_LEVEL_SRAM_STACK		0x00054000
193 #else
194 #define LOW_LEVEL_SRAM_STACK		0x00018000
195 #endif /* !CONFIG_ARM64 */
196 #elif CONFIG_SUNXI_SRAM_ADDRESS == 0x20000
197 #define CONFIG_SPL_TEXT_BASE		0x20060		/* sram start+header */
198 #define CONFIG_SPL_MAX_SIZE		0x7fa0		/* 32 KiB */
199 /* end of SRAM A2 on H6 for now */
200 #define LOW_LEVEL_SRAM_STACK		0x00118000
201 #else
202 #define CONFIG_SPL_TEXT_BASE		0x60		/* sram start+header */
203 #define CONFIG_SPL_MAX_SIZE		0x5fa0		/* 24KB on sun4i/sun7i */
204 #define LOW_LEVEL_SRAM_STACK		0x00008000	/* End of sram */
205 #endif
206 
207 #define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
208 
209 #define CONFIG_SPL_PAD_TO		32768		/* decimal for 'dd' */
210 
211 
212 /* I2C */
213 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
214     defined CONFIG_SY8106A_POWER
215 #endif
216 
217 #if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \
218     defined CONFIG_I2C2_ENABLE || defined CONFIG_I2C3_ENABLE || \
219     defined CONFIG_I2C4_ENABLE || defined CONFIG_R_I2C_ENABLE
220 #define CONFIG_SYS_I2C_MVTWSI
221 #ifndef CONFIG_DM_I2C
222 #define CONFIG_SYS_I2C
223 #define CONFIG_SYS_I2C_SPEED		400000
224 #define CONFIG_SYS_I2C_SLAVE		0x7f
225 #endif
226 #endif
227 
228 #if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
229 #define CONFIG_SYS_I2C_SOFT
230 #define CONFIG_SYS_I2C_SOFT_SPEED	50000
231 #define CONFIG_SYS_I2C_SOFT_SLAVE	0x00
232 /* We use pin names in Kconfig and sunxi_name_to_gpio() */
233 #define CONFIG_SOFT_I2C_GPIO_SDA	soft_i2c_gpio_sda
234 #define CONFIG_SOFT_I2C_GPIO_SCL	soft_i2c_gpio_scl
235 #ifndef __ASSEMBLY__
236 extern int soft_i2c_gpio_sda;
237 extern int soft_i2c_gpio_scl;
238 #endif
239 #define CONFIG_VIDEO_LCD_I2C_BUS	0 /* The lcd panel soft i2c is bus 0 */
240 #define CONFIG_SYS_SPD_BUS_NUM		1 /* And the axp209 i2c bus is bus 1 */
241 #else
242 #define CONFIG_SYS_SPD_BUS_NUM		0 /* The axp209 i2c bus is bus 0 */
243 #define CONFIG_VIDEO_LCD_I2C_BUS	-1 /* NA, but necessary to compile */
244 #endif
245 
246 /* PMU */
247 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
248     defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER || \
249     defined CONFIG_SY8106A_POWER
250 #endif
251 
252 #ifdef CONFIG_REQUIRE_SERIAL_CONSOLE
253 #if CONFIG_CONS_INDEX == 1
254 #ifdef CONFIG_MACH_SUN9I
255 #define OF_STDOUT_PATH		"/soc/serial@07000000:115200"
256 #else
257 #define OF_STDOUT_PATH		"/soc@01c00000/serial@01c28000:115200"
258 #endif
259 #elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I)
260 #define OF_STDOUT_PATH		"/soc@01c00000/serial@01c28400:115200"
261 #elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I)
262 #define OF_STDOUT_PATH		"/soc@01c00000/serial@01c28800:115200"
263 #elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I)
264 #define OF_STDOUT_PATH		"/soc@01c00000/serial@01f02800:115200"
265 #else
266 #error Unsupported console port nr. Please fix stdout-path in sunxi-common.h.
267 #endif
268 #endif /* ifdef CONFIG_REQUIRE_SERIAL_CONSOLE */
269 
270 /* GPIO */
271 #define CONFIG_SUNXI_GPIO
272 
273 #ifdef CONFIG_VIDEO_SUNXI
274 /*
275  * The amount of RAM to keep free at the top of RAM when relocating u-boot,
276  * to use as framebuffer. This must be a multiple of 4096.
277  */
278 #define CONFIG_SUNXI_MAX_FB_SIZE (16 << 20)
279 
280 #define CONFIG_VIDEO_LOGO
281 #define CONFIG_VIDEO_STD_TIMINGS
282 #define CONFIG_I2C_EDID
283 #define VIDEO_LINE_LEN (pGD->plnSizeX)
284 
285 /* allow both serial and cfb console. */
286 /* stop x86 thinking in cfbconsole from trying to init a pc keyboard */
287 
288 #endif /* CONFIG_VIDEO_SUNXI */
289 
290 /* Ethernet support */
291 
292 #ifdef CONFIG_SUN7I_GMAC
293 #define CONFIG_PHY_REALTEK
294 #endif
295 
296 #ifdef CONFIG_USB_EHCI_HCD
297 #define CONFIG_USB_OHCI_NEW
298 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
299 #endif
300 
301 #ifdef CONFIG_USB_KEYBOARD
302 #define CONFIG_PREBOOT
303 #endif
304 
305 #ifndef CONFIG_SPL_BUILD
306 
307 #ifdef CONFIG_ARM64
308 /*
309  * Boards seem to come with at least 512MB of DRAM.
310  * The kernel should go at 512K, which is the default text offset (that will
311  * be adjusted at runtime if needed).
312  * There is no compression for arm64 kernels (yet), so leave some space
313  * for really big kernels, say 256MB for now.
314  * Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd.
315  * Align the initrd to a 2MB page.
316  */
317 #define BOOTM_SIZE	__stringify(0xa000000)
318 #define KERNEL_ADDR_R	__stringify(SDRAM_OFFSET(0080000))
319 #define FDT_ADDR_R	__stringify(SDRAM_OFFSET(FA00000))
320 #define SCRIPT_ADDR_R	__stringify(SDRAM_OFFSET(FC00000))
321 #define PXEFILE_ADDR_R	__stringify(SDRAM_OFFSET(FD00000))
322 #define RAMDISK_ADDR_R	__stringify(SDRAM_OFFSET(FE00000))
323 
324 #else
325 /*
326  * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc.
327  * 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
328  * 1M script, 1M pxe and the ramdisk at the end.
329  */
330 #ifndef CONFIG_MACH_SUN8I_V3S
331 #define BOOTM_SIZE     __stringify(0xa000000)
332 #define KERNEL_ADDR_R  __stringify(SDRAM_OFFSET(2000000))
333 #define FDT_ADDR_R     __stringify(SDRAM_OFFSET(3000000))
334 #define SCRIPT_ADDR_R  __stringify(SDRAM_OFFSET(3100000))
335 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000))
336 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3300000))
337 #else
338 /*
339  * 64M RAM minus 2MB heap + 16MB for u-boot, stack, fb, etc.
340  * 16M uncompressed kernel, 8M compressed kernel, 1M fdt,
341  * 1M script, 1M pxe and the ramdisk at the end.
342  */
343 #define BOOTM_SIZE     __stringify(0x2e00000)
344 #define KERNEL_ADDR_R  __stringify(SDRAM_OFFSET(1000000))
345 #define FDT_ADDR_R     __stringify(SDRAM_OFFSET(1800000))
346 #define SCRIPT_ADDR_R  __stringify(SDRAM_OFFSET(1900000))
347 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(1A00000))
348 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(1B00000))
349 #endif
350 #endif
351 
352 #define MEM_LAYOUT_ENV_SETTINGS \
353 	"bootm_size=" BOOTM_SIZE "\0" \
354 	"kernel_addr_r=" KERNEL_ADDR_R "\0" \
355 	"fdt_addr_r=" FDT_ADDR_R "\0" \
356 	"scriptaddr=" SCRIPT_ADDR_R "\0" \
357 	"pxefile_addr_r=" PXEFILE_ADDR_R "\0" \
358 	"ramdisk_addr_r=" RAMDISK_ADDR_R "\0"
359 
360 #define DFU_ALT_INFO_RAM \
361 	"dfu_alt_info_ram=" \
362 	"kernel ram " KERNEL_ADDR_R " 0x1000000;" \
363 	"fdt ram " FDT_ADDR_R " 0x100000;" \
364 	"ramdisk ram " RAMDISK_ADDR_R " 0x4000000\0"
365 
366 #ifdef CONFIG_MMC
367 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1
368 #define BOOTENV_DEV_MMC_AUTO(devtypeu, devtypel, instance)		\
369 	BOOTENV_DEV_MMC(MMC, mmc, 0)					\
370 	BOOTENV_DEV_MMC(MMC, mmc, 1)					\
371 	"bootcmd_mmc_auto="						\
372 		"if test ${mmc_bootdev} -eq 1; then "			\
373 			"run bootcmd_mmc1; "				\
374 			"run bootcmd_mmc0; "				\
375 		"elif test ${mmc_bootdev} -eq 0; then "			\
376 			"run bootcmd_mmc0; "				\
377 			"run bootcmd_mmc1; "				\
378 		"fi\0"
379 
380 #define BOOTENV_DEV_NAME_MMC_AUTO(devtypeu, devtypel, instance) \
381 	"mmc_auto "
382 
383 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC_AUTO, mmc_auto, na)
384 #else
385 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
386 #endif
387 #else
388 #define BOOT_TARGET_DEVICES_MMC(func)
389 #endif
390 
391 #ifdef CONFIG_AHCI
392 #define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
393 #else
394 #define BOOT_TARGET_DEVICES_SCSI(func)
395 #endif
396 
397 #ifdef CONFIG_USB_STORAGE
398 #define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0)
399 #else
400 #define BOOT_TARGET_DEVICES_USB(func)
401 #endif
402 
403 /* FEL boot support, auto-execute boot.scr if a script address was provided */
404 #define BOOTENV_DEV_FEL(devtypeu, devtypel, instance) \
405 	"bootcmd_fel=" \
406 		"if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then " \
407 			"echo '(FEL boot)'; " \
408 			"source ${fel_scriptaddr}; " \
409 		"fi\0"
410 #define BOOTENV_DEV_NAME_FEL(devtypeu, devtypel, instance) \
411 	"fel "
412 
413 #define BOOT_TARGET_DEVICES(func) \
414 	func(FEL, fel, na) \
415 	BOOT_TARGET_DEVICES_MMC(func) \
416 	BOOT_TARGET_DEVICES_SCSI(func) \
417 	BOOT_TARGET_DEVICES_USB(func) \
418 	func(PXE, pxe, na) \
419 	func(DHCP, dhcp, na)
420 
421 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
422 #define BOOTCMD_SUNXI_COMPAT \
423 	"bootcmd_sunxi_compat=" \
424 		"setenv root /dev/mmcblk0p3 rootwait; " \
425 		"if ext2load mmc 0 0x44000000 uEnv.txt; then " \
426 			"echo Loaded environment from uEnv.txt; " \
427 			"env import -t 0x44000000 ${filesize}; " \
428 		"fi; " \
429 		"setenv bootargs console=${console} root=${root} ${extraargs}; " \
430 		"ext2load mmc 0 0x43000000 script.bin && " \
431 		"ext2load mmc 0 0x48000000 uImage && " \
432 		"bootm 0x48000000\0"
433 #else
434 #define BOOTCMD_SUNXI_COMPAT
435 #endif
436 
437 #include <config_distro_bootcmd.h>
438 
439 #ifdef CONFIG_USB_KEYBOARD
440 #define CONSOLE_STDIN_SETTINGS \
441 	"preboot=usb start\0" \
442 	"stdin=serial,usbkbd\0"
443 #else
444 #define CONSOLE_STDIN_SETTINGS \
445 	"stdin=serial\0"
446 #endif
447 
448 #ifdef CONFIG_VIDEO
449 #define CONSOLE_STDOUT_SETTINGS \
450 	"stdout=serial,vga\0" \
451 	"stderr=serial,vga\0"
452 #elif CONFIG_DM_VIDEO
453 #define CONFIG_SYS_WHITE_ON_BLACK
454 #define CONSOLE_STDOUT_SETTINGS \
455 	"stdout=serial,vidconsole\0" \
456 	"stderr=serial,vidconsole\0"
457 #else
458 #define CONSOLE_STDOUT_SETTINGS \
459 	"stdout=serial\0" \
460 	"stderr=serial\0"
461 #endif
462 
463 #ifdef CONFIG_MTDIDS_DEFAULT
464 #define SUNXI_MTDIDS_DEFAULT \
465 	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0"
466 #else
467 #define SUNXI_MTDIDS_DEFAULT
468 #endif
469 
470 #ifdef CONFIG_MTDPARTS_DEFAULT
471 #define SUNXI_MTDPARTS_DEFAULT \
472 	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"
473 #else
474 #define SUNXI_MTDPARTS_DEFAULT
475 #endif
476 
477 #define PARTS_DEFAULT \
478 	"name=loader1,start=8k,size=32k,uuid=${uuid_gpt_loader1};" \
479 	"name=loader2,size=984k,uuid=${uuid_gpt_loader2};" \
480 	"name=esp,size=128M,bootable,uuid=${uuid_gpt_esp};" \
481 	"name=system,size=-,uuid=${uuid_gpt_system};"
482 
483 #define UUID_GPT_ESP "c12a7328-f81f-11d2-ba4b-00a0c93ec93b"
484 
485 #ifdef CONFIG_ARM64
486 #define UUID_GPT_SYSTEM "b921b045-1df0-41c3-af44-4c6f280d3fae"
487 #else
488 #define UUID_GPT_SYSTEM "69dad710-2ce4-4e3c-b16c-21a1d49abed3"
489 #endif
490 
491 #define CONSOLE_ENV_SETTINGS \
492 	CONSOLE_STDIN_SETTINGS \
493 	CONSOLE_STDOUT_SETTINGS
494 
495 #ifdef CONFIG_ARM64
496 #define FDTFILE "allwinner/" CONFIG_DEFAULT_DEVICE_TREE ".dtb"
497 #else
498 #define FDTFILE CONFIG_DEFAULT_DEVICE_TREE ".dtb"
499 #endif
500 
501 #define CONFIG_EXTRA_ENV_SETTINGS \
502 	CONSOLE_ENV_SETTINGS \
503 	MEM_LAYOUT_ENV_SETTINGS \
504 	DFU_ALT_INFO_RAM \
505 	"fdtfile=" FDTFILE "\0" \
506 	"console=ttyS0,115200\0" \
507 	SUNXI_MTDIDS_DEFAULT \
508 	SUNXI_MTDPARTS_DEFAULT \
509 	"uuid_gpt_esp=" UUID_GPT_ESP "\0" \
510 	"uuid_gpt_system=" UUID_GPT_SYSTEM "\0" \
511 	"partitions=" PARTS_DEFAULT "\0" \
512 	BOOTCMD_SUNXI_COMPAT \
513 	BOOTENV
514 
515 #else /* ifndef CONFIG_SPL_BUILD */
516 #define CONFIG_EXTRA_ENV_SETTINGS
517 #endif
518 
519 #endif /* _SUNXI_COMMON_CONFIG_H */
520