1 /* 2 * (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net> 3 * 4 * (C) Copyright 2007-2011 5 * Allwinner Technology Co., Ltd. <www.allwinnertech.com> 6 * Tom Cubie <tangliang@allwinnertech.com> 7 * 8 * Configuration settings for the Allwinner sunxi series of boards. 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 #ifndef _SUNXI_COMMON_CONFIG_H 14 #define _SUNXI_COMMON_CONFIG_H 15 16 #include <asm/arch/cpu.h> 17 #include <linux/stringify.h> 18 19 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT 20 /* 21 * The U-Boot workarounds bugs in the outdated buggy sunxi-3.4 kernels at the 22 * expense of restricting some features, so the regular machine id values can 23 * be used. 24 */ 25 # define CONFIG_MACH_TYPE_COMPAT_REV 0 26 #else 27 /* 28 * A compatibility guard to prevent loading outdated buggy sunxi-3.4 kernels. 29 * Only sunxi-3.4 kernels with appropriate fixes applied are able to pass 30 * beyond the machine id check. 31 */ 32 # define CONFIG_MACH_TYPE_COMPAT_REV 1 33 #endif 34 35 #ifdef CONFIG_ARM64 36 #define CONFIG_BUILD_TARGET "u-boot.itb" 37 #define CONFIG_SYS_BOOTM_LEN (32 << 20) 38 #endif 39 40 /* Serial & console */ 41 #define CONFIG_SYS_NS16550_SERIAL 42 /* ns16550 reg in the low bits of cpu reg */ 43 #define CONFIG_SYS_NS16550_CLK 24000000 44 #ifndef CONFIG_DM_SERIAL 45 # define CONFIG_SYS_NS16550_REG_SIZE -4 46 # define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE 47 # define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE 48 # define CONFIG_SYS_NS16550_COM3 SUNXI_UART2_BASE 49 # define CONFIG_SYS_NS16550_COM4 SUNXI_UART3_BASE 50 # define CONFIG_SYS_NS16550_COM5 SUNXI_R_UART_BASE 51 #endif 52 53 /* CPU */ 54 #define COUNTER_FREQUENCY 24000000 55 56 /* 57 * The DRAM Base differs between some models. We cannot use macros for the 58 * CONFIG_FOO defines which contain the DRAM base address since they end 59 * up unexpanded in include/autoconf.mk . 60 * 61 * So we have to have this #ifdef #else #endif block for these. 62 */ 63 #ifdef CONFIG_MACH_SUN9I 64 #define SDRAM_OFFSET(x) 0x2##x 65 #define CONFIG_SYS_SDRAM_BASE 0x20000000 66 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* default load address */ 67 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here 68 * since it needs to fit in with the other values. By also #defining it 69 * we get warnings if the Kconfig value mismatches. */ 70 #define CONFIG_SPL_STACK_R_ADDR 0x2fe00000 71 #define CONFIG_SPL_BSS_START_ADDR 0x2ff80000 72 #else 73 #define SDRAM_OFFSET(x) 0x4##x 74 #define CONFIG_SYS_SDRAM_BASE 0x40000000 75 #define CONFIG_SYS_LOAD_ADDR 0x42000000 /* default load address */ 76 /* V3s do not have enough memory to place code at 0x4a000000 */ 77 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here 78 * since it needs to fit in with the other values. By also #defining it 79 * we get warnings if the Kconfig value mismatches. */ 80 #define CONFIG_SPL_STACK_R_ADDR 0x4fe00000 81 #define CONFIG_SPL_BSS_START_ADDR 0x4ff80000 82 #endif 83 84 #define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 /* 512 KiB */ 85 86 #ifdef CONFIG_SUNXI_HIGH_SRAM 87 /* 88 * The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is 89 * slightly bigger. Note that it is possible to map the first 32 KiB of the 90 * A1 at 0x00000000 like with older SoCs by writing 0x16aa0001 to the 91 * undocumented 0x008000e0 SYS_CTRL register. Where the 16aa is a key and 92 * the 1 actually activates the mapping of the first 32 KiB to 0x00000000. 93 */ 94 #define CONFIG_SYS_INIT_RAM_ADDR 0x10000 95 #define CONFIG_SYS_INIT_RAM_SIZE 0x08000 /* FIXME: 40 KiB ? */ 96 #else 97 #define CONFIG_SYS_INIT_RAM_ADDR 0x0 98 #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* 32 KiB */ 99 #endif 100 101 #define CONFIG_SYS_INIT_SP_OFFSET \ 102 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 103 #define CONFIG_SYS_INIT_SP_ADDR \ 104 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 105 106 #define CONFIG_NR_DRAM_BANKS 1 107 #define PHYS_SDRAM_0 CONFIG_SYS_SDRAM_BASE 108 #define PHYS_SDRAM_0_SIZE 0x80000000 /* 2 GiB */ 109 110 #ifdef CONFIG_AHCI 111 #define CONFIG_SCSI_AHCI_PLAT 112 #define CONFIG_SUNXI_AHCI 113 #define CONFIG_SYS_64BIT_LBA 114 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 115 #define CONFIG_SYS_SCSI_MAX_LUN 1 116 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 117 CONFIG_SYS_SCSI_MAX_LUN) 118 #endif 119 120 #define CONFIG_SETUP_MEMORY_TAGS 121 #define CONFIG_CMDLINE_TAG 122 #define CONFIG_INITRD_TAG 123 #define CONFIG_SERIAL_TAG 124 125 #ifdef CONFIG_NAND_SUNXI 126 #define CONFIG_SYS_NAND_MAX_ECCPOS 1664 127 #define CONFIG_SYS_NAND_ONFI_DETECTION 128 #define CONFIG_SYS_MAX_NAND_DEVICE 8 129 130 #define CONFIG_MTD_DEVICE 131 #define CONFIG_MTD_PARTITIONS 132 #endif 133 134 #ifdef CONFIG_SPL_SPI_SUNXI 135 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 136 #endif 137 138 /* mmc config */ 139 #ifdef CONFIG_MMC 140 #define CONFIG_MMC_SUNXI_SLOT 0 141 #endif 142 143 #if defined(CONFIG_ENV_IS_IN_MMC) 144 145 #ifdef CONFIG_ARM64 146 /* 147 * This is actually (CONFIG_ENV_OFFSET - 148 * (CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)), but the value will be used 149 * directly in a makefile, without the preprocessor expansion. 150 */ 151 #define CONFIG_BOARD_SIZE_LIMIT 0x7e000 152 #endif 153 154 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1 155 /* If we have two devices (most likely eMMC + MMC), favour the eMMC */ 156 #define CONFIG_SYS_MMC_ENV_DEV 1 157 #else 158 /* Otherwise, use the only device we have */ 159 #define CONFIG_SYS_MMC_ENV_DEV 0 160 #endif 161 #define CONFIG_SYS_MMC_MAX_DEVICE 4 162 #elif defined(CONFIG_ENV_IS_NOWHERE) 163 #define CONFIG_ENV_SIZE (128 << 10) 164 #endif 165 166 #ifndef CONFIG_MACH_SUN8I_V3S 167 /* 64MB of malloc() pool */ 168 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (64 << 20)) 169 #else 170 /* 2MB of malloc() pool */ 171 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (2 << 20)) 172 #endif 173 174 /* 175 * Miscellaneous configurable options 176 */ 177 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 178 #define CONFIG_SYS_PBSIZE 1024 /* Print Buffer Size */ 179 180 /* standalone support */ 181 #define CONFIG_STANDALONE_LOAD_ADDR CONFIG_SYS_LOAD_ADDR 182 183 /* FLASH and environment organization */ 184 185 #define CONFIG_SYS_MONITOR_LEN (768 << 10) /* 768 KiB */ 186 187 #ifndef CONFIG_ARM64 /* AArch64 FEL support is not ready yet */ 188 #define CONFIG_SPL_BOARD_LOAD_IMAGE 189 #endif 190 191 #ifdef CONFIG_SUNXI_HIGH_SRAM 192 #define CONFIG_SPL_TEXT_BASE 0x10060 /* sram start+header */ 193 #define CONFIG_SPL_MAX_SIZE 0x7fa0 /* 32 KiB */ 194 #ifdef CONFIG_ARM64 195 /* end of SRAM A2 for now, as SRAM A1 is pretty tight for an ARM64 build */ 196 #define LOW_LEVEL_SRAM_STACK 0x00054000 197 #else 198 #define LOW_LEVEL_SRAM_STACK 0x00018000 199 #endif /* !CONFIG_ARM64 */ 200 #else 201 #define CONFIG_SPL_TEXT_BASE 0x60 /* sram start+header */ 202 #define CONFIG_SPL_MAX_SIZE 0x5fa0 /* 24KB on sun4i/sun7i */ 203 #define LOW_LEVEL_SRAM_STACK 0x00008000 /* End of sram */ 204 #endif 205 206 #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK 207 208 #define CONFIG_SPL_PAD_TO 32768 /* decimal for 'dd' */ 209 210 211 /* I2C */ 212 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \ 213 defined CONFIG_SY8106A_POWER 214 #endif 215 216 #if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \ 217 defined CONFIG_I2C2_ENABLE || defined CONFIG_I2C3_ENABLE || \ 218 defined CONFIG_I2C4_ENABLE || defined CONFIG_R_I2C_ENABLE 219 #define CONFIG_SYS_I2C_MVTWSI 220 #ifndef CONFIG_DM_I2C 221 #define CONFIG_SYS_I2C 222 #define CONFIG_SYS_I2C_SPEED 400000 223 #define CONFIG_SYS_I2C_SLAVE 0x7f 224 #endif 225 #endif 226 227 #if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD) 228 #define CONFIG_SYS_I2C_SOFT 229 #define CONFIG_SYS_I2C_SOFT_SPEED 50000 230 #define CONFIG_SYS_I2C_SOFT_SLAVE 0x00 231 /* We use pin names in Kconfig and sunxi_name_to_gpio() */ 232 #define CONFIG_SOFT_I2C_GPIO_SDA soft_i2c_gpio_sda 233 #define CONFIG_SOFT_I2C_GPIO_SCL soft_i2c_gpio_scl 234 #ifndef __ASSEMBLY__ 235 extern int soft_i2c_gpio_sda; 236 extern int soft_i2c_gpio_scl; 237 #endif 238 #define CONFIG_VIDEO_LCD_I2C_BUS 0 /* The lcd panel soft i2c is bus 0 */ 239 #define CONFIG_SYS_SPD_BUS_NUM 1 /* And the axp209 i2c bus is bus 1 */ 240 #else 241 #define CONFIG_SYS_SPD_BUS_NUM 0 /* The axp209 i2c bus is bus 0 */ 242 #define CONFIG_VIDEO_LCD_I2C_BUS -1 /* NA, but necessary to compile */ 243 #endif 244 245 /* PMU */ 246 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \ 247 defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER || \ 248 defined CONFIG_SY8106A_POWER 249 #endif 250 251 #ifdef CONFIG_REQUIRE_SERIAL_CONSOLE 252 #if CONFIG_CONS_INDEX == 1 253 #ifdef CONFIG_MACH_SUN9I 254 #define OF_STDOUT_PATH "/soc/serial@07000000:115200" 255 #else 256 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28000:115200" 257 #endif 258 #elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I) 259 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28400:115200" 260 #elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I) 261 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28800:115200" 262 #elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I) 263 #define OF_STDOUT_PATH "/soc@01c00000/serial@01f02800:115200" 264 #else 265 #error Unsupported console port nr. Please fix stdout-path in sunxi-common.h. 266 #endif 267 #endif /* ifdef CONFIG_REQUIRE_SERIAL_CONSOLE */ 268 269 /* GPIO */ 270 #define CONFIG_SUNXI_GPIO 271 272 #ifdef CONFIG_VIDEO_SUNXI 273 /* 274 * The amount of RAM to keep free at the top of RAM when relocating u-boot, 275 * to use as framebuffer. This must be a multiple of 4096. 276 */ 277 #define CONFIG_SUNXI_MAX_FB_SIZE (16 << 20) 278 279 #define CONFIG_VIDEO_LOGO 280 #define CONFIG_VIDEO_STD_TIMINGS 281 #define CONFIG_I2C_EDID 282 #define VIDEO_LINE_LEN (pGD->plnSizeX) 283 284 /* allow both serial and cfb console. */ 285 /* stop x86 thinking in cfbconsole from trying to init a pc keyboard */ 286 287 #endif /* CONFIG_VIDEO_SUNXI */ 288 289 /* Ethernet support */ 290 #ifdef CONFIG_SUN4I_EMAC 291 #define CONFIG_MII /* MII PHY management */ 292 #endif 293 294 #ifdef CONFIG_SUN7I_GMAC 295 #define CONFIG_MII /* MII PHY management */ 296 #define CONFIG_PHY_REALTEK 297 #endif 298 299 #ifdef CONFIG_USB_EHCI_HCD 300 #define CONFIG_USB_OHCI_NEW 301 #define CONFIG_USB_OHCI_SUNXI 302 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 303 #endif 304 305 #ifdef CONFIG_USB_FUNCTION_MASS_STORAGE 306 #endif 307 308 #ifdef CONFIG_USB_KEYBOARD 309 #define CONFIG_PREBOOT 310 #endif 311 312 #define CONFIG_MISC_INIT_R 313 314 #ifndef CONFIG_SPL_BUILD 315 316 #ifdef CONFIG_ARM64 317 /* 318 * Boards seem to come with at least 512MB of DRAM. 319 * The kernel should go at 512K, which is the default text offset (that will 320 * be adjusted at runtime if needed). 321 * There is no compression for arm64 kernels (yet), so leave some space 322 * for really big kernels, say 256MB for now. 323 * Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd. 324 * Align the initrd to a 2MB page. 325 */ 326 #define BOOTM_SIZE __stringify(0xa000000) 327 #define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(0080000)) 328 #define FDT_ADDR_R __stringify(SDRAM_OFFSET(FA00000)) 329 #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(FC00000)) 330 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(FD00000)) 331 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(FE00000)) 332 333 #else 334 /* 335 * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc. 336 * 32M uncompressed kernel, 16M compressed kernel, 1M fdt, 337 * 1M script, 1M pxe and the ramdisk at the end. 338 */ 339 #ifndef CONFIG_MACH_SUN8I_V3S 340 #define BOOTM_SIZE __stringify(0xa000000) 341 #define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(2000000)) 342 #define FDT_ADDR_R __stringify(SDRAM_OFFSET(3000000)) 343 #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(3100000)) 344 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000)) 345 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3300000)) 346 #else 347 /* 348 * 64M RAM minus 2MB heap + 16MB for u-boot, stack, fb, etc. 349 * 16M uncompressed kernel, 8M compressed kernel, 1M fdt, 350 * 1M script, 1M pxe and the ramdisk at the end. 351 */ 352 #define BOOTM_SIZE __stringify(0x2e00000) 353 #define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(1000000)) 354 #define FDT_ADDR_R __stringify(SDRAM_OFFSET(1800000)) 355 #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(1900000)) 356 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(1A00000)) 357 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(1B00000)) 358 #endif 359 #endif 360 361 #define MEM_LAYOUT_ENV_SETTINGS \ 362 "bootm_size=" BOOTM_SIZE "\0" \ 363 "kernel_addr_r=" KERNEL_ADDR_R "\0" \ 364 "fdt_addr_r=" FDT_ADDR_R "\0" \ 365 "scriptaddr=" SCRIPT_ADDR_R "\0" \ 366 "pxefile_addr_r=" PXEFILE_ADDR_R "\0" \ 367 "ramdisk_addr_r=" RAMDISK_ADDR_R "\0" 368 369 #define DFU_ALT_INFO_RAM \ 370 "dfu_alt_info_ram=" \ 371 "kernel ram " KERNEL_ADDR_R " 0x1000000;" \ 372 "fdt ram " FDT_ADDR_R " 0x100000;" \ 373 "ramdisk ram " RAMDISK_ADDR_R " 0x4000000\0" 374 375 #ifdef CONFIG_MMC 376 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1 377 #define BOOTENV_DEV_MMC_AUTO(devtypeu, devtypel, instance) \ 378 BOOTENV_DEV_MMC(MMC, mmc, 0) \ 379 BOOTENV_DEV_MMC(MMC, mmc, 1) \ 380 "bootcmd_mmc_auto=" \ 381 "if test ${mmc_bootdev} -eq 1; then " \ 382 "run bootcmd_mmc1; " \ 383 "run bootcmd_mmc0; " \ 384 "elif test ${mmc_bootdev} -eq 0; then " \ 385 "run bootcmd_mmc0; " \ 386 "run bootcmd_mmc1; " \ 387 "fi\0" 388 389 #define BOOTENV_DEV_NAME_MMC_AUTO(devtypeu, devtypel, instance) \ 390 "mmc_auto " 391 392 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC_AUTO, mmc_auto, na) 393 #else 394 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) 395 #endif 396 #else 397 #define BOOT_TARGET_DEVICES_MMC(func) 398 #endif 399 400 #ifdef CONFIG_AHCI 401 #define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0) 402 #else 403 #define BOOT_TARGET_DEVICES_SCSI(func) 404 #endif 405 406 #ifdef CONFIG_USB_STORAGE 407 #define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) 408 #else 409 #define BOOT_TARGET_DEVICES_USB(func) 410 #endif 411 412 /* FEL boot support, auto-execute boot.scr if a script address was provided */ 413 #define BOOTENV_DEV_FEL(devtypeu, devtypel, instance) \ 414 "bootcmd_fel=" \ 415 "if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then " \ 416 "echo '(FEL boot)'; " \ 417 "source ${fel_scriptaddr}; " \ 418 "fi\0" 419 #define BOOTENV_DEV_NAME_FEL(devtypeu, devtypel, instance) \ 420 "fel " 421 422 #define BOOT_TARGET_DEVICES(func) \ 423 func(FEL, fel, na) \ 424 BOOT_TARGET_DEVICES_MMC(func) \ 425 BOOT_TARGET_DEVICES_SCSI(func) \ 426 BOOT_TARGET_DEVICES_USB(func) \ 427 func(PXE, pxe, na) \ 428 func(DHCP, dhcp, na) 429 430 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT 431 #define BOOTCMD_SUNXI_COMPAT \ 432 "bootcmd_sunxi_compat=" \ 433 "setenv root /dev/mmcblk0p3 rootwait; " \ 434 "if ext2load mmc 0 0x44000000 uEnv.txt; then " \ 435 "echo Loaded environment from uEnv.txt; " \ 436 "env import -t 0x44000000 ${filesize}; " \ 437 "fi; " \ 438 "setenv bootargs console=${console} root=${root} ${extraargs}; " \ 439 "ext2load mmc 0 0x43000000 script.bin && " \ 440 "ext2load mmc 0 0x48000000 uImage && " \ 441 "bootm 0x48000000\0" 442 #else 443 #define BOOTCMD_SUNXI_COMPAT 444 #endif 445 446 #include <config_distro_bootcmd.h> 447 448 #ifdef CONFIG_USB_KEYBOARD 449 #define CONSOLE_STDIN_SETTINGS \ 450 "preboot=usb start\0" \ 451 "stdin=serial,usbkbd\0" 452 #else 453 #define CONSOLE_STDIN_SETTINGS \ 454 "stdin=serial\0" 455 #endif 456 457 #ifdef CONFIG_VIDEO 458 #define CONSOLE_STDOUT_SETTINGS \ 459 "stdout=serial,vga\0" \ 460 "stderr=serial,vga\0" 461 #elif CONFIG_DM_VIDEO 462 #define CONFIG_SYS_WHITE_ON_BLACK 463 #define CONSOLE_STDOUT_SETTINGS \ 464 "stdout=serial,vidconsole\0" \ 465 "stderr=serial,vidconsole\0" 466 #else 467 #define CONSOLE_STDOUT_SETTINGS \ 468 "stdout=serial\0" \ 469 "stderr=serial\0" 470 #endif 471 472 #ifdef CONFIG_MTDIDS_DEFAULT 473 #define SUNXI_MTDIDS_DEFAULT \ 474 "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" 475 #else 476 #define SUNXI_MTDIDS_DEFAULT 477 #endif 478 479 #ifdef CONFIG_MTDPARTS_DEFAULT 480 #define SUNXI_MTDPARTS_DEFAULT \ 481 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" 482 #else 483 #define SUNXI_MTDPARTS_DEFAULT 484 #endif 485 486 #define PARTS_DEFAULT \ 487 "name=loader1,start=8k,size=32k,uuid=${uuid_gpt_loader1};" \ 488 "name=loader2,size=984k,uuid=${uuid_gpt_loader2};" \ 489 "name=esp,size=128M,bootable,uuid=${uuid_gpt_esp};" \ 490 "name=system,size=-,uuid=${uuid_gpt_system};" 491 492 #define UUID_GPT_ESP "c12a7328-f81f-11d2-ba4b-00a0c93ec93b" 493 494 #ifdef CONFIG_ARM64 495 #define UUID_GPT_SYSTEM "b921b045-1df0-41c3-af44-4c6f280d3fae" 496 #else 497 #define UUID_GPT_SYSTEM "69dad710-2ce4-4e3c-b16c-21a1d49abed3" 498 #endif 499 500 #define CONSOLE_ENV_SETTINGS \ 501 CONSOLE_STDIN_SETTINGS \ 502 CONSOLE_STDOUT_SETTINGS 503 504 #ifdef CONFIG_ARM64 505 #define FDTFILE "allwinner/" CONFIG_DEFAULT_DEVICE_TREE ".dtb" 506 #else 507 #define FDTFILE CONFIG_DEFAULT_DEVICE_TREE ".dtb" 508 #endif 509 510 #define CONFIG_EXTRA_ENV_SETTINGS \ 511 CONSOLE_ENV_SETTINGS \ 512 MEM_LAYOUT_ENV_SETTINGS \ 513 DFU_ALT_INFO_RAM \ 514 "fdtfile=" FDTFILE "\0" \ 515 "console=ttyS0,115200\0" \ 516 SUNXI_MTDIDS_DEFAULT \ 517 SUNXI_MTDPARTS_DEFAULT \ 518 "uuid_gpt_esp=" UUID_GPT_ESP "\0" \ 519 "uuid_gpt_system=" UUID_GPT_SYSTEM "\0" \ 520 "partitions=" PARTS_DEFAULT "\0" \ 521 BOOTCMD_SUNXI_COMPAT \ 522 BOOTENV 523 524 #else /* ifndef CONFIG_SPL_BUILD */ 525 #define CONFIG_EXTRA_ENV_SETTINGS 526 #endif 527 528 #endif /* _SUNXI_COMMON_CONFIG_H */ 529