1 /* 2 * (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net> 3 * 4 * (C) Copyright 2007-2011 5 * Allwinner Technology Co., Ltd. <www.allwinnertech.com> 6 * Tom Cubie <tangliang@allwinnertech.com> 7 * 8 * Configuration settings for the Allwinner sunxi series of boards. 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 #ifndef _SUNXI_COMMON_CONFIG_H 14 #define _SUNXI_COMMON_CONFIG_H 15 16 #include <asm/arch/cpu.h> 17 #include <linux/stringify.h> 18 19 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT 20 /* 21 * The U-Boot workarounds bugs in the outdated buggy sunxi-3.4 kernels at the 22 * expense of restricting some features, so the regular machine id values can 23 * be used. 24 */ 25 # define CONFIG_MACH_TYPE_COMPAT_REV 0 26 #else 27 /* 28 * A compatibility guard to prevent loading outdated buggy sunxi-3.4 kernels. 29 * Only sunxi-3.4 kernels with appropriate fixes applied are able to pass 30 * beyond the machine id check. 31 */ 32 # define CONFIG_MACH_TYPE_COMPAT_REV 1 33 #endif 34 35 #ifdef CONFIG_ARM64 36 #define CONFIG_BUILD_TARGET "u-boot.itb" 37 #endif 38 39 /* Serial & console */ 40 #define CONFIG_SYS_NS16550_SERIAL 41 /* ns16550 reg in the low bits of cpu reg */ 42 #define CONFIG_SYS_NS16550_CLK 24000000 43 #ifndef CONFIG_DM_SERIAL 44 # define CONFIG_SYS_NS16550_REG_SIZE -4 45 # define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE 46 # define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE 47 # define CONFIG_SYS_NS16550_COM3 SUNXI_UART2_BASE 48 # define CONFIG_SYS_NS16550_COM4 SUNXI_UART3_BASE 49 # define CONFIG_SYS_NS16550_COM5 SUNXI_R_UART_BASE 50 #endif 51 52 /* CPU */ 53 #define COUNTER_FREQUENCY 24000000 54 55 /* 56 * The DRAM Base differs between some models. We cannot use macros for the 57 * CONFIG_FOO defines which contain the DRAM base address since they end 58 * up unexpanded in include/autoconf.mk . 59 * 60 * So we have to have this #ifdef #else #endif block for these. 61 */ 62 #ifdef CONFIG_MACH_SUN9I 63 #define SDRAM_OFFSET(x) 0x2##x 64 #define CONFIG_SYS_SDRAM_BASE 0x20000000 65 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* default load address */ 66 #define CONFIG_SYS_TEXT_BASE 0x2a000000 67 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here 68 * since it needs to fit in with the other values. By also #defining it 69 * we get warnings if the Kconfig value mismatches. */ 70 #define CONFIG_SPL_STACK_R_ADDR 0x2fe00000 71 #define CONFIG_SPL_BSS_START_ADDR 0x2ff80000 72 #else 73 #define SDRAM_OFFSET(x) 0x4##x 74 #define CONFIG_SYS_SDRAM_BASE 0x40000000 75 #define CONFIG_SYS_LOAD_ADDR 0x42000000 /* default load address */ 76 /* V3s do not have enough memory to place code at 0x4a000000 */ 77 #ifndef CONFIG_MACH_SUN8I_V3S 78 #define CONFIG_SYS_TEXT_BASE 0x4a000000 79 #else 80 #define CONFIG_SYS_TEXT_BASE 0x42e00000 81 #endif 82 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here 83 * since it needs to fit in with the other values. By also #defining it 84 * we get warnings if the Kconfig value mismatches. */ 85 #define CONFIG_SPL_STACK_R_ADDR 0x4fe00000 86 #define CONFIG_SPL_BSS_START_ADDR 0x4ff80000 87 #endif 88 89 #define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 /* 512 KiB */ 90 91 #ifdef CONFIG_SUNXI_HIGH_SRAM 92 /* 93 * The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is 94 * slightly bigger. Note that it is possible to map the first 32 KiB of the 95 * A1 at 0x00000000 like with older SoCs by writing 0x16aa0001 to the 96 * undocumented 0x008000e0 SYS_CTRL register. Where the 16aa is a key and 97 * the 1 actually activates the mapping of the first 32 KiB to 0x00000000. 98 */ 99 #define CONFIG_SYS_INIT_RAM_ADDR 0x10000 100 #define CONFIG_SYS_INIT_RAM_SIZE 0x08000 /* FIXME: 40 KiB ? */ 101 #else 102 #define CONFIG_SYS_INIT_RAM_ADDR 0x0 103 #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* 32 KiB */ 104 #endif 105 106 #define CONFIG_SYS_INIT_SP_OFFSET \ 107 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 108 #define CONFIG_SYS_INIT_SP_ADDR \ 109 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 110 111 #define CONFIG_NR_DRAM_BANKS 1 112 #define PHYS_SDRAM_0 CONFIG_SYS_SDRAM_BASE 113 #define PHYS_SDRAM_0_SIZE 0x80000000 /* 2 GiB */ 114 115 #ifdef CONFIG_AHCI 116 #define CONFIG_LIBATA 117 #define CONFIG_SCSI_AHCI 118 #define CONFIG_SCSI_AHCI_PLAT 119 #define CONFIG_SUNXI_AHCI 120 #define CONFIG_SYS_64BIT_LBA 121 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 122 #define CONFIG_SYS_SCSI_MAX_LUN 1 123 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 124 CONFIG_SYS_SCSI_MAX_LUN) 125 #define CONFIG_SCSI 126 #endif 127 128 #define CONFIG_SETUP_MEMORY_TAGS 129 #define CONFIG_CMDLINE_TAG 130 #define CONFIG_INITRD_TAG 131 #define CONFIG_SERIAL_TAG 132 133 #ifdef CONFIG_NAND_SUNXI 134 #define CONFIG_SYS_NAND_MAX_ECCPOS 1664 135 #define CONFIG_SYS_NAND_ONFI_DETECTION 136 #define CONFIG_SYS_MAX_NAND_DEVICE 8 137 138 #define CONFIG_MTD_DEVICE 139 #define CONFIG_MTD_PARTITIONS 140 #endif 141 142 #ifdef CONFIG_SPL_SPI_SUNXI 143 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 144 #endif 145 146 /* mmc config */ 147 #ifdef CONFIG_MMC 148 #define CONFIG_MMC_SUNXI_SLOT 0 149 #endif 150 151 #if defined(CONFIG_ENV_IS_IN_MMC) 152 #define CONFIG_SYS_MMC_ENV_DEV 0 /* first detected MMC controller */ 153 #define CONFIG_SYS_MMC_MAX_DEVICE 4 154 #elif defined(CONFIG_ENV_IS_NOWHERE) 155 #define CONFIG_ENV_SIZE (128 << 10) 156 #endif 157 158 #ifndef CONFIG_MACH_SUN8I_V3S 159 /* 64MB of malloc() pool */ 160 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (64 << 20)) 161 #else 162 /* 2MB of malloc() pool */ 163 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (2 << 20)) 164 #endif 165 166 /* 167 * Miscellaneous configurable options 168 */ 169 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 170 #define CONFIG_SYS_PBSIZE 1024 /* Print Buffer Size */ 171 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 172 173 /* Boot Argument Buffer Size */ 174 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 175 176 /* standalone support */ 177 #define CONFIG_STANDALONE_LOAD_ADDR CONFIG_SYS_LOAD_ADDR 178 179 /* FLASH and environment organization */ 180 181 #define CONFIG_SYS_MONITOR_LEN (768 << 10) /* 768 KiB */ 182 183 #define CONFIG_SPL_FRAMEWORK 184 185 #ifndef CONFIG_ARM64 /* AArch64 FEL support is not ready yet */ 186 #define CONFIG_SPL_BOARD_LOAD_IMAGE 187 #endif 188 189 #ifdef CONFIG_SUNXI_HIGH_SRAM 190 #define CONFIG_SPL_TEXT_BASE 0x10060 /* sram start+header */ 191 #define CONFIG_SPL_MAX_SIZE 0x7fa0 /* 32 KiB */ 192 #ifdef CONFIG_ARM64 193 /* end of SRAM A2 for now, as SRAM A1 is pretty tight for an ARM64 build */ 194 #define LOW_LEVEL_SRAM_STACK 0x00054000 195 #else 196 #define LOW_LEVEL_SRAM_STACK 0x00018000 197 #endif /* !CONFIG_ARM64 */ 198 #else 199 #define CONFIG_SPL_TEXT_BASE 0x60 /* sram start+header */ 200 #define CONFIG_SPL_MAX_SIZE 0x5fa0 /* 24KB on sun4i/sun7i */ 201 #define LOW_LEVEL_SRAM_STACK 0x00008000 /* End of sram */ 202 #endif 203 204 #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK 205 206 #ifndef CONFIG_ARM64 207 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds" 208 #endif 209 210 #define CONFIG_SPL_PAD_TO 32768 /* decimal for 'dd' */ 211 212 213 /* I2C */ 214 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \ 215 defined CONFIG_SY8106A_POWER 216 #endif 217 218 #if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \ 219 defined CONFIG_I2C2_ENABLE || defined CONFIG_I2C3_ENABLE || \ 220 defined CONFIG_I2C4_ENABLE || defined CONFIG_R_I2C_ENABLE 221 #define CONFIG_SYS_I2C_MVTWSI 222 #ifndef CONFIG_DM_I2C 223 #define CONFIG_SYS_I2C 224 #define CONFIG_SYS_I2C_SPEED 400000 225 #define CONFIG_SYS_I2C_SLAVE 0x7f 226 #endif 227 #endif 228 229 #if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD) 230 #define CONFIG_SYS_I2C_SOFT 231 #define CONFIG_SYS_I2C_SOFT_SPEED 50000 232 #define CONFIG_SYS_I2C_SOFT_SLAVE 0x00 233 /* We use pin names in Kconfig and sunxi_name_to_gpio() */ 234 #define CONFIG_SOFT_I2C_GPIO_SDA soft_i2c_gpio_sda 235 #define CONFIG_SOFT_I2C_GPIO_SCL soft_i2c_gpio_scl 236 #ifndef __ASSEMBLY__ 237 extern int soft_i2c_gpio_sda; 238 extern int soft_i2c_gpio_scl; 239 #endif 240 #define CONFIG_VIDEO_LCD_I2C_BUS 0 /* The lcd panel soft i2c is bus 0 */ 241 #define CONFIG_SYS_SPD_BUS_NUM 1 /* And the axp209 i2c bus is bus 1 */ 242 #else 243 #define CONFIG_SYS_SPD_BUS_NUM 0 /* The axp209 i2c bus is bus 0 */ 244 #define CONFIG_VIDEO_LCD_I2C_BUS -1 /* NA, but necessary to compile */ 245 #endif 246 247 /* PMU */ 248 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \ 249 defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER || \ 250 defined CONFIG_SY8106A_POWER 251 #endif 252 253 #ifdef CONFIG_REQUIRE_SERIAL_CONSOLE 254 #if CONFIG_CONS_INDEX == 1 255 #ifdef CONFIG_MACH_SUN9I 256 #define OF_STDOUT_PATH "/soc/serial@07000000:115200" 257 #else 258 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28000:115200" 259 #endif 260 #elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I) 261 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28400:115200" 262 #elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I) 263 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28800:115200" 264 #elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I) 265 #define OF_STDOUT_PATH "/soc@01c00000/serial@01f02800:115200" 266 #else 267 #error Unsupported console port nr. Please fix stdout-path in sunxi-common.h. 268 #endif 269 #endif /* ifdef CONFIG_REQUIRE_SERIAL_CONSOLE */ 270 271 /* GPIO */ 272 #define CONFIG_SUNXI_GPIO 273 274 #ifdef CONFIG_VIDEO 275 /* 276 * The amount of RAM to keep free at the top of RAM when relocating u-boot, 277 * to use as framebuffer. This must be a multiple of 4096. 278 */ 279 #define CONFIG_SUNXI_MAX_FB_SIZE (16 << 20) 280 281 /* Do we want to initialize a simple FB? */ 282 #define CONFIG_VIDEO_DT_SIMPLEFB 283 284 #define CONFIG_VIDEO_SUNXI 285 286 #define CONFIG_VIDEO_LOGO 287 #define CONFIG_VIDEO_STD_TIMINGS 288 #define CONFIG_I2C_EDID 289 #define VIDEO_LINE_LEN (pGD->plnSizeX) 290 291 /* allow both serial and cfb console. */ 292 /* stop x86 thinking in cfbconsole from trying to init a pc keyboard */ 293 294 #endif /* CONFIG_VIDEO */ 295 296 /* Ethernet support */ 297 #ifdef CONFIG_SUNXI_EMAC 298 #define CONFIG_PHY_ADDR 1 299 #define CONFIG_MII /* MII PHY management */ 300 #define CONFIG_PHYLIB 301 #endif 302 303 #ifdef CONFIG_SUNXI_GMAC 304 #define CONFIG_PHY_GIGE /* GMAC can use gigabit PHY */ 305 #define CONFIG_PHY_ADDR 1 306 #define CONFIG_MII /* MII PHY management */ 307 #define CONFIG_PHY_REALTEK 308 #endif 309 310 #ifdef CONFIG_USB_EHCI_HCD 311 #define CONFIG_USB_OHCI_NEW 312 #define CONFIG_USB_OHCI_SUNXI 313 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 314 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1 315 #endif 316 317 #ifdef CONFIG_USB_MUSB_SUNXI 318 #define CONFIG_USB_MUSB_PIO_ONLY 319 #endif 320 321 #ifdef CONFIG_USB_MUSB_GADGET 322 #define CONFIG_USB_FUNCTION_FASTBOOT 323 #define CONFIG_USB_FUNCTION_MASS_STORAGE 324 #endif 325 326 #ifdef CONFIG_USB_FUNCTION_FASTBOOT 327 #define CONFIG_CMD_FASTBOOT 328 #define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR 329 #define CONFIG_FASTBOOT_BUF_SIZE 0x2000000 330 #define CONFIG_ANDROID_BOOT_IMAGE 331 332 #define CONFIG_FASTBOOT_FLASH 333 334 #ifdef CONFIG_MMC 335 #define CONFIG_FASTBOOT_FLASH_MMC_DEV 0 336 #endif 337 #endif 338 339 #ifdef CONFIG_USB_FUNCTION_MASS_STORAGE 340 #endif 341 342 #ifdef CONFIG_USB_KEYBOARD 343 #define CONFIG_PREBOOT 344 #define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE 345 #endif 346 347 #define CONFIG_MISC_INIT_R 348 349 #ifndef CONFIG_SPL_BUILD 350 #include <config_distro_defaults.h> 351 352 #ifdef CONFIG_ARM64 353 /* 354 * Boards seem to come with at least 512MB of DRAM. 355 * The kernel should go at 512K, which is the default text offset (that will 356 * be adjusted at runtime if needed). 357 * There is no compression for arm64 kernels (yet), so leave some space 358 * for really big kernels, say 256MB for now. 359 * Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd. 360 * Align the initrd to a 2MB page. 361 */ 362 #define BOOTM_SIZE __stringify(0xa000000) 363 #define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(0080000)) 364 #define FDT_ADDR_R __stringify(SDRAM_OFFSET(FA00000)) 365 #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(FC00000)) 366 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(FD00000)) 367 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(FE00000)) 368 369 #else 370 /* 371 * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc. 372 * 32M uncompressed kernel, 16M compressed kernel, 1M fdt, 373 * 1M script, 1M pxe and the ramdisk at the end. 374 */ 375 #ifndef CONFIG_MACH_SUN8I_V3S 376 #define BOOTM_SIZE __stringify(0xa000000) 377 #define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(2000000)) 378 #define FDT_ADDR_R __stringify(SDRAM_OFFSET(3000000)) 379 #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(3100000)) 380 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000)) 381 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3300000)) 382 #else 383 /* 384 * 64M RAM minus 2MB heap + 16MB for u-boot, stack, fb, etc. 385 * 16M uncompressed kernel, 8M compressed kernel, 1M fdt, 386 * 1M script, 1M pxe and the ramdisk at the end. 387 */ 388 #define BOOTM_SIZE __stringify(0x2e00000) 389 #define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(1000000)) 390 #define FDT_ADDR_R __stringify(SDRAM_OFFSET(1800000)) 391 #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(1900000)) 392 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(1A00000)) 393 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(1B00000)) 394 #endif 395 #endif 396 397 #define MEM_LAYOUT_ENV_SETTINGS \ 398 "bootm_size=" BOOTM_SIZE "\0" \ 399 "kernel_addr_r=" KERNEL_ADDR_R "\0" \ 400 "fdt_addr_r=" FDT_ADDR_R "\0" \ 401 "scriptaddr=" SCRIPT_ADDR_R "\0" \ 402 "pxefile_addr_r=" PXEFILE_ADDR_R "\0" \ 403 "ramdisk_addr_r=" RAMDISK_ADDR_R "\0" 404 405 #define DFU_ALT_INFO_RAM \ 406 "dfu_alt_info_ram=" \ 407 "kernel ram " KERNEL_ADDR_R " 0x1000000;" \ 408 "fdt ram " FDT_ADDR_R " 0x100000;" \ 409 "ramdisk ram " RAMDISK_ADDR_R " 0x4000000\0" 410 411 #ifdef CONFIG_MMC 412 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) 413 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1 414 #define BOOT_TARGET_DEVICES_MMC_EXTRA(func) func(MMC, mmc, 1) 415 #else 416 #define BOOT_TARGET_DEVICES_MMC_EXTRA(func) 417 #endif 418 #else 419 #define BOOT_TARGET_DEVICES_MMC(func) 420 #define BOOT_TARGET_DEVICES_MMC_EXTRA(func) 421 #endif 422 423 #ifdef CONFIG_AHCI 424 #define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0) 425 #else 426 #define BOOT_TARGET_DEVICES_SCSI(func) 427 #endif 428 429 #ifdef CONFIG_USB_STORAGE 430 #define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) 431 #else 432 #define BOOT_TARGET_DEVICES_USB(func) 433 #endif 434 435 /* FEL boot support, auto-execute boot.scr if a script address was provided */ 436 #define BOOTENV_DEV_FEL(devtypeu, devtypel, instance) \ 437 "bootcmd_fel=" \ 438 "if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then " \ 439 "echo '(FEL boot)'; " \ 440 "source ${fel_scriptaddr}; " \ 441 "fi\0" 442 #define BOOTENV_DEV_NAME_FEL(devtypeu, devtypel, instance) \ 443 "fel " 444 445 #define BOOT_TARGET_DEVICES(func) \ 446 func(FEL, fel, na) \ 447 BOOT_TARGET_DEVICES_MMC(func) \ 448 BOOT_TARGET_DEVICES_MMC_EXTRA(func) \ 449 BOOT_TARGET_DEVICES_SCSI(func) \ 450 BOOT_TARGET_DEVICES_USB(func) \ 451 func(PXE, pxe, na) \ 452 func(DHCP, dhcp, na) 453 454 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT 455 #define BOOTCMD_SUNXI_COMPAT \ 456 "bootcmd_sunxi_compat=" \ 457 "setenv root /dev/mmcblk0p3 rootwait; " \ 458 "if ext2load mmc 0 0x44000000 uEnv.txt; then " \ 459 "echo Loaded environment from uEnv.txt; " \ 460 "env import -t 0x44000000 ${filesize}; " \ 461 "fi; " \ 462 "setenv bootargs console=${console} root=${root} ${extraargs}; " \ 463 "ext2load mmc 0 0x43000000 script.bin && " \ 464 "ext2load mmc 0 0x48000000 uImage && " \ 465 "bootm 0x48000000\0" 466 #else 467 #define BOOTCMD_SUNXI_COMPAT 468 #endif 469 470 #include <config_distro_bootcmd.h> 471 472 #ifdef CONFIG_USB_KEYBOARD 473 #define CONSOLE_STDIN_SETTINGS \ 474 "preboot=usb start\0" \ 475 "stdin=serial,usbkbd\0" 476 #else 477 #define CONSOLE_STDIN_SETTINGS \ 478 "stdin=serial\0" 479 #endif 480 481 #ifdef CONFIG_VIDEO 482 #define CONSOLE_STDOUT_SETTINGS \ 483 "stdout=serial,vga\0" \ 484 "stderr=serial,vga\0" 485 #elif CONFIG_DM_VIDEO 486 #define CONFIG_SYS_WHITE_ON_BLACK 487 #define CONSOLE_STDOUT_SETTINGS \ 488 "stdout=serial,vidconsole\0" \ 489 "stderr=serial,vidconsole\0" 490 #else 491 #define CONSOLE_STDOUT_SETTINGS \ 492 "stdout=serial\0" \ 493 "stderr=serial\0" 494 #endif 495 496 #ifdef CONFIG_MTDIDS_DEFAULT 497 #define SUNXI_MTDIDS_DEFAULT \ 498 "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" 499 #else 500 #define SUNXI_MTDIDS_DEFAULT 501 #endif 502 503 #ifdef CONFIG_MTDPARTS_DEFAULT 504 #define SUNXI_MTDPARTS_DEFAULT \ 505 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" 506 #else 507 #define SUNXI_MTDPARTS_DEFAULT 508 #endif 509 510 #define CONSOLE_ENV_SETTINGS \ 511 CONSOLE_STDIN_SETTINGS \ 512 CONSOLE_STDOUT_SETTINGS 513 514 #ifdef CONFIG_ARM64 515 #define FDTFILE "allwinner/" CONFIG_DEFAULT_DEVICE_TREE ".dtb" 516 #else 517 #define FDTFILE CONFIG_DEFAULT_DEVICE_TREE ".dtb" 518 #endif 519 520 #define CONFIG_EXTRA_ENV_SETTINGS \ 521 CONSOLE_ENV_SETTINGS \ 522 MEM_LAYOUT_ENV_SETTINGS \ 523 DFU_ALT_INFO_RAM \ 524 "fdtfile=" FDTFILE "\0" \ 525 "console=ttyS0,115200\0" \ 526 SUNXI_MTDIDS_DEFAULT \ 527 SUNXI_MTDPARTS_DEFAULT \ 528 BOOTCMD_SUNXI_COMPAT \ 529 BOOTENV 530 531 #else /* ifndef CONFIG_SPL_BUILD */ 532 #define CONFIG_EXTRA_ENV_SETTINGS 533 #endif 534 535 #endif /* _SUNXI_COMMON_CONFIG_H */ 536