1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net> 4 * 5 * (C) Copyright 2007-2011 6 * Allwinner Technology Co., Ltd. <www.allwinnertech.com> 7 * Tom Cubie <tangliang@allwinnertech.com> 8 * 9 * Configuration settings for the Allwinner sunxi series of boards. 10 */ 11 12 #ifndef _SUNXI_COMMON_CONFIG_H 13 #define _SUNXI_COMMON_CONFIG_H 14 15 #include <asm/arch/cpu.h> 16 #include <linux/stringify.h> 17 18 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT 19 /* 20 * The U-Boot workarounds bugs in the outdated buggy sunxi-3.4 kernels at the 21 * expense of restricting some features, so the regular machine id values can 22 * be used. 23 */ 24 # define CONFIG_MACH_TYPE_COMPAT_REV 0 25 #else 26 /* 27 * A compatibility guard to prevent loading outdated buggy sunxi-3.4 kernels. 28 * Only sunxi-3.4 kernels with appropriate fixes applied are able to pass 29 * beyond the machine id check. 30 */ 31 # define CONFIG_MACH_TYPE_COMPAT_REV 1 32 #endif 33 34 #ifdef CONFIG_ARM64 35 #define CONFIG_BUILD_TARGET "u-boot.itb" 36 #define CONFIG_SYS_BOOTM_LEN (32 << 20) 37 #endif 38 39 /* Serial & console */ 40 #define CONFIG_SYS_NS16550_SERIAL 41 /* ns16550 reg in the low bits of cpu reg */ 42 #define CONFIG_SYS_NS16550_CLK 24000000 43 #ifndef CONFIG_DM_SERIAL 44 # define CONFIG_SYS_NS16550_REG_SIZE -4 45 # define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE 46 # define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE 47 # define CONFIG_SYS_NS16550_COM3 SUNXI_UART2_BASE 48 # define CONFIG_SYS_NS16550_COM4 SUNXI_UART3_BASE 49 # define CONFIG_SYS_NS16550_COM5 SUNXI_R_UART_BASE 50 #endif 51 52 /* CPU */ 53 #define COUNTER_FREQUENCY 24000000 54 55 /* 56 * The DRAM Base differs between some models. We cannot use macros for the 57 * CONFIG_FOO defines which contain the DRAM base address since they end 58 * up unexpanded in include/autoconf.mk . 59 * 60 * So we have to have this #ifdef #else #endif block for these. 61 */ 62 #ifdef CONFIG_MACH_SUN9I 63 #define SDRAM_OFFSET(x) 0x2##x 64 #define CONFIG_SYS_SDRAM_BASE 0x20000000 65 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* default load address */ 66 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here 67 * since it needs to fit in with the other values. By also #defining it 68 * we get warnings if the Kconfig value mismatches. */ 69 #define CONFIG_SPL_STACK_R_ADDR 0x2fe00000 70 #define CONFIG_SPL_BSS_START_ADDR 0x2ff80000 71 #else 72 #define SDRAM_OFFSET(x) 0x4##x 73 #define CONFIG_SYS_SDRAM_BASE 0x40000000 74 #define CONFIG_SYS_LOAD_ADDR 0x42000000 /* default load address */ 75 /* V3s do not have enough memory to place code at 0x4a000000 */ 76 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here 77 * since it needs to fit in with the other values. By also #defining it 78 * we get warnings if the Kconfig value mismatches. */ 79 #define CONFIG_SPL_STACK_R_ADDR 0x4fe00000 80 #define CONFIG_SPL_BSS_START_ADDR 0x4ff80000 81 #endif 82 83 #define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 /* 512 KiB */ 84 85 /* 86 * The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is 87 * slightly bigger. Note that it is possible to map the first 32 KiB of the 88 * A1 at 0x00000000 like with older SoCs by writing 0x16aa0001 to the 89 * undocumented 0x008000e0 SYS_CTRL register. Where the 16aa is a key and 90 * the 1 actually activates the mapping of the first 32 KiB to 0x00000000. 91 * A64 and H5 also has SRAM A1 at 0x00010000, but no magic remap register 92 * is known yet. 93 * H6 has SRAM A1 at 0x00020000. 94 */ 95 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SUNXI_SRAM_ADDRESS 96 /* FIXME: this may be larger on some SoCs */ 97 #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* 32 KiB */ 98 99 #define CONFIG_SYS_INIT_SP_OFFSET \ 100 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 101 #define CONFIG_SYS_INIT_SP_ADDR \ 102 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 103 104 #define CONFIG_NR_DRAM_BANKS 1 105 #define PHYS_SDRAM_0 CONFIG_SYS_SDRAM_BASE 106 #define PHYS_SDRAM_0_SIZE 0x80000000 /* 2 GiB */ 107 108 #ifdef CONFIG_AHCI 109 #define CONFIG_SCSI_AHCI_PLAT 110 #define CONFIG_SUNXI_AHCI 111 #define CONFIG_SYS_64BIT_LBA 112 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 113 #define CONFIG_SYS_SCSI_MAX_LUN 1 114 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 115 CONFIG_SYS_SCSI_MAX_LUN) 116 #endif 117 118 #define CONFIG_SETUP_MEMORY_TAGS 119 #define CONFIG_CMDLINE_TAG 120 #define CONFIG_INITRD_TAG 121 #define CONFIG_SERIAL_TAG 122 123 #ifdef CONFIG_NAND_SUNXI 124 #define CONFIG_SYS_NAND_MAX_ECCPOS 1664 125 #define CONFIG_SYS_NAND_ONFI_DETECTION 126 #define CONFIG_SYS_MAX_NAND_DEVICE 8 127 #endif 128 129 #ifdef CONFIG_SPL_SPI_SUNXI 130 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 131 #endif 132 133 /* mmc config */ 134 #ifdef CONFIG_MMC 135 #define CONFIG_MMC_SUNXI_SLOT 0 136 #endif 137 138 #if defined(CONFIG_ENV_IS_IN_MMC) 139 140 #ifdef CONFIG_ARM64 141 /* 142 * This is actually (CONFIG_ENV_OFFSET - 143 * (CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)), but the value will be used 144 * directly in a makefile, without the preprocessor expansion. 145 */ 146 #define CONFIG_BOARD_SIZE_LIMIT 0x7e000 147 #endif 148 149 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1 150 /* If we have two devices (most likely eMMC + MMC), favour the eMMC */ 151 #define CONFIG_SYS_MMC_ENV_DEV 1 152 #else 153 /* Otherwise, use the only device we have */ 154 #define CONFIG_SYS_MMC_ENV_DEV 0 155 #endif 156 #define CONFIG_SYS_MMC_MAX_DEVICE 4 157 #elif defined(CONFIG_ENV_IS_NOWHERE) 158 #define CONFIG_ENV_SIZE (128 << 10) 159 #endif 160 161 #ifndef CONFIG_MACH_SUN8I_V3S 162 /* 64MB of malloc() pool */ 163 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (64 << 20)) 164 #else 165 /* 2MB of malloc() pool */ 166 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (2 << 20)) 167 #endif 168 169 /* 170 * Miscellaneous configurable options 171 */ 172 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 173 #define CONFIG_SYS_PBSIZE 1024 /* Print Buffer Size */ 174 175 /* standalone support */ 176 #define CONFIG_STANDALONE_LOAD_ADDR CONFIG_SYS_LOAD_ADDR 177 178 /* FLASH and environment organization */ 179 180 #define CONFIG_SYS_MONITOR_LEN (768 << 10) /* 768 KiB */ 181 182 #ifndef CONFIG_ARM64 /* AArch64 FEL support is not ready yet */ 183 #define CONFIG_SPL_BOARD_LOAD_IMAGE 184 #endif 185 186 /* 187 * We cannot use expressions here, because expressions won't be evaluated in 188 * autoconf.mk. 189 */ 190 #if CONFIG_SUNXI_SRAM_ADDRESS == 0x10000 191 #define CONFIG_SPL_TEXT_BASE 0x10060 /* sram start+header */ 192 #define CONFIG_SPL_MAX_SIZE 0x7fa0 /* 32 KiB */ 193 #ifdef CONFIG_ARM64 194 /* end of SRAM A2 for now, as SRAM A1 is pretty tight for an ARM64 build */ 195 #define LOW_LEVEL_SRAM_STACK 0x00054000 196 #else 197 #define LOW_LEVEL_SRAM_STACK 0x00018000 198 #endif /* !CONFIG_ARM64 */ 199 #elif CONFIG_SUNXI_SRAM_ADDRESS == 0x20000 200 #define CONFIG_SPL_TEXT_BASE 0x20060 /* sram start+header */ 201 #define CONFIG_SPL_MAX_SIZE 0x7fa0 /* 32 KiB */ 202 /* end of SRAM A2 on H6 for now */ 203 #define LOW_LEVEL_SRAM_STACK 0x00118000 204 #else 205 #define CONFIG_SPL_TEXT_BASE 0x60 /* sram start+header */ 206 #define CONFIG_SPL_MAX_SIZE 0x5fa0 /* 24KB on sun4i/sun7i */ 207 #define LOW_LEVEL_SRAM_STACK 0x00008000 /* End of sram */ 208 #endif 209 210 #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK 211 212 #define CONFIG_SPL_PAD_TO 32768 /* decimal for 'dd' */ 213 214 215 /* I2C */ 216 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \ 217 defined CONFIG_SY8106A_POWER 218 #endif 219 220 #if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \ 221 defined CONFIG_I2C2_ENABLE || defined CONFIG_I2C3_ENABLE || \ 222 defined CONFIG_I2C4_ENABLE || defined CONFIG_R_I2C_ENABLE 223 #define CONFIG_SYS_I2C_MVTWSI 224 #ifndef CONFIG_DM_I2C 225 #define CONFIG_SYS_I2C 226 #define CONFIG_SYS_I2C_SPEED 400000 227 #define CONFIG_SYS_I2C_SLAVE 0x7f 228 #endif 229 #endif 230 231 #if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD) 232 #define CONFIG_SYS_I2C_SOFT 233 #define CONFIG_SYS_I2C_SOFT_SPEED 50000 234 #define CONFIG_SYS_I2C_SOFT_SLAVE 0x00 235 /* We use pin names in Kconfig and sunxi_name_to_gpio() */ 236 #define CONFIG_SOFT_I2C_GPIO_SDA soft_i2c_gpio_sda 237 #define CONFIG_SOFT_I2C_GPIO_SCL soft_i2c_gpio_scl 238 #ifndef __ASSEMBLY__ 239 extern int soft_i2c_gpio_sda; 240 extern int soft_i2c_gpio_scl; 241 #endif 242 #define CONFIG_VIDEO_LCD_I2C_BUS 0 /* The lcd panel soft i2c is bus 0 */ 243 #define CONFIG_SYS_SPD_BUS_NUM 1 /* And the axp209 i2c bus is bus 1 */ 244 #else 245 #define CONFIG_SYS_SPD_BUS_NUM 0 /* The axp209 i2c bus is bus 0 */ 246 #define CONFIG_VIDEO_LCD_I2C_BUS -1 /* NA, but necessary to compile */ 247 #endif 248 249 /* PMU */ 250 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \ 251 defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER || \ 252 defined CONFIG_SY8106A_POWER 253 #endif 254 255 #ifdef CONFIG_REQUIRE_SERIAL_CONSOLE 256 #if CONFIG_CONS_INDEX == 1 257 #ifdef CONFIG_MACH_SUN9I 258 #define OF_STDOUT_PATH "/soc/serial@07000000:115200" 259 #else 260 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28000:115200" 261 #endif 262 #elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I) 263 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28400:115200" 264 #elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I) 265 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28800:115200" 266 #elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I) 267 #define OF_STDOUT_PATH "/soc@01c00000/serial@01f02800:115200" 268 #else 269 #error Unsupported console port nr. Please fix stdout-path in sunxi-common.h. 270 #endif 271 #endif /* ifdef CONFIG_REQUIRE_SERIAL_CONSOLE */ 272 273 /* GPIO */ 274 #define CONFIG_SUNXI_GPIO 275 276 #ifdef CONFIG_VIDEO_SUNXI 277 /* 278 * The amount of RAM to keep free at the top of RAM when relocating u-boot, 279 * to use as framebuffer. This must be a multiple of 4096. 280 */ 281 #define CONFIG_SUNXI_MAX_FB_SIZE (16 << 20) 282 283 #define CONFIG_VIDEO_LOGO 284 #define CONFIG_VIDEO_STD_TIMINGS 285 #define CONFIG_I2C_EDID 286 #define VIDEO_LINE_LEN (pGD->plnSizeX) 287 288 /* allow both serial and cfb console. */ 289 /* stop x86 thinking in cfbconsole from trying to init a pc keyboard */ 290 291 #endif /* CONFIG_VIDEO_SUNXI */ 292 293 /* Ethernet support */ 294 #ifdef CONFIG_SUN4I_EMAC 295 #define CONFIG_MII /* MII PHY management */ 296 #endif 297 298 #ifdef CONFIG_SUN7I_GMAC 299 #define CONFIG_MII /* MII PHY management */ 300 #define CONFIG_PHY_REALTEK 301 #endif 302 303 #ifdef CONFIG_USB_EHCI_HCD 304 #define CONFIG_USB_OHCI_NEW 305 #define CONFIG_USB_OHCI_SUNXI 306 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 307 #endif 308 309 #ifdef CONFIG_USB_KEYBOARD 310 #define CONFIG_PREBOOT 311 #endif 312 313 #define CONFIG_MISC_INIT_R 314 315 #ifndef CONFIG_SPL_BUILD 316 317 #ifdef CONFIG_ARM64 318 /* 319 * Boards seem to come with at least 512MB of DRAM. 320 * The kernel should go at 512K, which is the default text offset (that will 321 * be adjusted at runtime if needed). 322 * There is no compression for arm64 kernels (yet), so leave some space 323 * for really big kernels, say 256MB for now. 324 * Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd. 325 * Align the initrd to a 2MB page. 326 */ 327 #define BOOTM_SIZE __stringify(0xa000000) 328 #define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(0080000)) 329 #define FDT_ADDR_R __stringify(SDRAM_OFFSET(FA00000)) 330 #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(FC00000)) 331 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(FD00000)) 332 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(FE00000)) 333 334 #else 335 /* 336 * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc. 337 * 32M uncompressed kernel, 16M compressed kernel, 1M fdt, 338 * 1M script, 1M pxe and the ramdisk at the end. 339 */ 340 #ifndef CONFIG_MACH_SUN8I_V3S 341 #define BOOTM_SIZE __stringify(0xa000000) 342 #define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(2000000)) 343 #define FDT_ADDR_R __stringify(SDRAM_OFFSET(3000000)) 344 #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(3100000)) 345 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000)) 346 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3300000)) 347 #else 348 /* 349 * 64M RAM minus 2MB heap + 16MB for u-boot, stack, fb, etc. 350 * 16M uncompressed kernel, 8M compressed kernel, 1M fdt, 351 * 1M script, 1M pxe and the ramdisk at the end. 352 */ 353 #define BOOTM_SIZE __stringify(0x2e00000) 354 #define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(1000000)) 355 #define FDT_ADDR_R __stringify(SDRAM_OFFSET(1800000)) 356 #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(1900000)) 357 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(1A00000)) 358 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(1B00000)) 359 #endif 360 #endif 361 362 #define MEM_LAYOUT_ENV_SETTINGS \ 363 "bootm_size=" BOOTM_SIZE "\0" \ 364 "kernel_addr_r=" KERNEL_ADDR_R "\0" \ 365 "fdt_addr_r=" FDT_ADDR_R "\0" \ 366 "scriptaddr=" SCRIPT_ADDR_R "\0" \ 367 "pxefile_addr_r=" PXEFILE_ADDR_R "\0" \ 368 "ramdisk_addr_r=" RAMDISK_ADDR_R "\0" 369 370 #define DFU_ALT_INFO_RAM \ 371 "dfu_alt_info_ram=" \ 372 "kernel ram " KERNEL_ADDR_R " 0x1000000;" \ 373 "fdt ram " FDT_ADDR_R " 0x100000;" \ 374 "ramdisk ram " RAMDISK_ADDR_R " 0x4000000\0" 375 376 #ifdef CONFIG_MMC 377 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1 378 #define BOOTENV_DEV_MMC_AUTO(devtypeu, devtypel, instance) \ 379 BOOTENV_DEV_MMC(MMC, mmc, 0) \ 380 BOOTENV_DEV_MMC(MMC, mmc, 1) \ 381 "bootcmd_mmc_auto=" \ 382 "if test ${mmc_bootdev} -eq 1; then " \ 383 "run bootcmd_mmc1; " \ 384 "run bootcmd_mmc0; " \ 385 "elif test ${mmc_bootdev} -eq 0; then " \ 386 "run bootcmd_mmc0; " \ 387 "run bootcmd_mmc1; " \ 388 "fi\0" 389 390 #define BOOTENV_DEV_NAME_MMC_AUTO(devtypeu, devtypel, instance) \ 391 "mmc_auto " 392 393 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC_AUTO, mmc_auto, na) 394 #else 395 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) 396 #endif 397 #else 398 #define BOOT_TARGET_DEVICES_MMC(func) 399 #endif 400 401 #ifdef CONFIG_AHCI 402 #define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0) 403 #else 404 #define BOOT_TARGET_DEVICES_SCSI(func) 405 #endif 406 407 #ifdef CONFIG_USB_STORAGE 408 #define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) 409 #else 410 #define BOOT_TARGET_DEVICES_USB(func) 411 #endif 412 413 /* FEL boot support, auto-execute boot.scr if a script address was provided */ 414 #define BOOTENV_DEV_FEL(devtypeu, devtypel, instance) \ 415 "bootcmd_fel=" \ 416 "if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then " \ 417 "echo '(FEL boot)'; " \ 418 "source ${fel_scriptaddr}; " \ 419 "fi\0" 420 #define BOOTENV_DEV_NAME_FEL(devtypeu, devtypel, instance) \ 421 "fel " 422 423 #define BOOT_TARGET_DEVICES(func) \ 424 func(FEL, fel, na) \ 425 BOOT_TARGET_DEVICES_MMC(func) \ 426 BOOT_TARGET_DEVICES_SCSI(func) \ 427 BOOT_TARGET_DEVICES_USB(func) \ 428 func(PXE, pxe, na) \ 429 func(DHCP, dhcp, na) 430 431 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT 432 #define BOOTCMD_SUNXI_COMPAT \ 433 "bootcmd_sunxi_compat=" \ 434 "setenv root /dev/mmcblk0p3 rootwait; " \ 435 "if ext2load mmc 0 0x44000000 uEnv.txt; then " \ 436 "echo Loaded environment from uEnv.txt; " \ 437 "env import -t 0x44000000 ${filesize}; " \ 438 "fi; " \ 439 "setenv bootargs console=${console} root=${root} ${extraargs}; " \ 440 "ext2load mmc 0 0x43000000 script.bin && " \ 441 "ext2load mmc 0 0x48000000 uImage && " \ 442 "bootm 0x48000000\0" 443 #else 444 #define BOOTCMD_SUNXI_COMPAT 445 #endif 446 447 #include <config_distro_bootcmd.h> 448 449 #ifdef CONFIG_USB_KEYBOARD 450 #define CONSOLE_STDIN_SETTINGS \ 451 "preboot=usb start\0" \ 452 "stdin=serial,usbkbd\0" 453 #else 454 #define CONSOLE_STDIN_SETTINGS \ 455 "stdin=serial\0" 456 #endif 457 458 #ifdef CONFIG_VIDEO 459 #define CONSOLE_STDOUT_SETTINGS \ 460 "stdout=serial,vga\0" \ 461 "stderr=serial,vga\0" 462 #elif CONFIG_DM_VIDEO 463 #define CONFIG_SYS_WHITE_ON_BLACK 464 #define CONSOLE_STDOUT_SETTINGS \ 465 "stdout=serial,vidconsole\0" \ 466 "stderr=serial,vidconsole\0" 467 #else 468 #define CONSOLE_STDOUT_SETTINGS \ 469 "stdout=serial\0" \ 470 "stderr=serial\0" 471 #endif 472 473 #ifdef CONFIG_MTDIDS_DEFAULT 474 #define SUNXI_MTDIDS_DEFAULT \ 475 "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" 476 #else 477 #define SUNXI_MTDIDS_DEFAULT 478 #endif 479 480 #ifdef CONFIG_MTDPARTS_DEFAULT 481 #define SUNXI_MTDPARTS_DEFAULT \ 482 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" 483 #else 484 #define SUNXI_MTDPARTS_DEFAULT 485 #endif 486 487 #define PARTS_DEFAULT \ 488 "name=loader1,start=8k,size=32k,uuid=${uuid_gpt_loader1};" \ 489 "name=loader2,size=984k,uuid=${uuid_gpt_loader2};" \ 490 "name=esp,size=128M,bootable,uuid=${uuid_gpt_esp};" \ 491 "name=system,size=-,uuid=${uuid_gpt_system};" 492 493 #define UUID_GPT_ESP "c12a7328-f81f-11d2-ba4b-00a0c93ec93b" 494 495 #ifdef CONFIG_ARM64 496 #define UUID_GPT_SYSTEM "b921b045-1df0-41c3-af44-4c6f280d3fae" 497 #else 498 #define UUID_GPT_SYSTEM "69dad710-2ce4-4e3c-b16c-21a1d49abed3" 499 #endif 500 501 #define CONSOLE_ENV_SETTINGS \ 502 CONSOLE_STDIN_SETTINGS \ 503 CONSOLE_STDOUT_SETTINGS 504 505 #ifdef CONFIG_ARM64 506 #define FDTFILE "allwinner/" CONFIG_DEFAULT_DEVICE_TREE ".dtb" 507 #else 508 #define FDTFILE CONFIG_DEFAULT_DEVICE_TREE ".dtb" 509 #endif 510 511 #define CONFIG_EXTRA_ENV_SETTINGS \ 512 CONSOLE_ENV_SETTINGS \ 513 MEM_LAYOUT_ENV_SETTINGS \ 514 DFU_ALT_INFO_RAM \ 515 "fdtfile=" FDTFILE "\0" \ 516 "console=ttyS0,115200\0" \ 517 SUNXI_MTDIDS_DEFAULT \ 518 SUNXI_MTDPARTS_DEFAULT \ 519 "uuid_gpt_esp=" UUID_GPT_ESP "\0" \ 520 "uuid_gpt_system=" UUID_GPT_SYSTEM "\0" \ 521 "partitions=" PARTS_DEFAULT "\0" \ 522 BOOTCMD_SUNXI_COMPAT \ 523 BOOTENV 524 525 #else /* ifndef CONFIG_SPL_BUILD */ 526 #define CONFIG_EXTRA_ENV_SETTINGS 527 #endif 528 529 #endif /* _SUNXI_COMMON_CONFIG_H */ 530