1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net> 4 * 5 * (C) Copyright 2007-2011 6 * Allwinner Technology Co., Ltd. <www.allwinnertech.com> 7 * Tom Cubie <tangliang@allwinnertech.com> 8 * 9 * Configuration settings for the Allwinner sunxi series of boards. 10 */ 11 12 #ifndef _SUNXI_COMMON_CONFIG_H 13 #define _SUNXI_COMMON_CONFIG_H 14 15 #include <asm/arch/cpu.h> 16 #include <linux/stringify.h> 17 18 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT 19 /* 20 * The U-Boot workarounds bugs in the outdated buggy sunxi-3.4 kernels at the 21 * expense of restricting some features, so the regular machine id values can 22 * be used. 23 */ 24 # define CONFIG_MACH_TYPE_COMPAT_REV 0 25 #else 26 /* 27 * A compatibility guard to prevent loading outdated buggy sunxi-3.4 kernels. 28 * Only sunxi-3.4 kernels with appropriate fixes applied are able to pass 29 * beyond the machine id check. 30 */ 31 # define CONFIG_MACH_TYPE_COMPAT_REV 1 32 #endif 33 34 #ifdef CONFIG_ARM64 35 #define CONFIG_BUILD_TARGET "u-boot.itb" 36 #define CONFIG_SYS_BOOTM_LEN (32 << 20) 37 #endif 38 39 /* Serial & console */ 40 #define CONFIG_SYS_NS16550_SERIAL 41 /* ns16550 reg in the low bits of cpu reg */ 42 #define CONFIG_SYS_NS16550_CLK 24000000 43 #ifndef CONFIG_DM_SERIAL 44 # define CONFIG_SYS_NS16550_REG_SIZE -4 45 # define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE 46 # define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE 47 # define CONFIG_SYS_NS16550_COM3 SUNXI_UART2_BASE 48 # define CONFIG_SYS_NS16550_COM4 SUNXI_UART3_BASE 49 # define CONFIG_SYS_NS16550_COM5 SUNXI_R_UART_BASE 50 #endif 51 52 /* CPU */ 53 #define COUNTER_FREQUENCY 24000000 54 55 /* 56 * The DRAM Base differs between some models. We cannot use macros for the 57 * CONFIG_FOO defines which contain the DRAM base address since they end 58 * up unexpanded in include/autoconf.mk . 59 * 60 * So we have to have this #ifdef #else #endif block for these. 61 */ 62 #ifdef CONFIG_MACH_SUN9I 63 #define SDRAM_OFFSET(x) 0x2##x 64 #define CONFIG_SYS_SDRAM_BASE 0x20000000 65 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* default load address */ 66 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here 67 * since it needs to fit in with the other values. By also #defining it 68 * we get warnings if the Kconfig value mismatches. */ 69 #define CONFIG_SPL_STACK_R_ADDR 0x2fe00000 70 #define CONFIG_SPL_BSS_START_ADDR 0x2ff80000 71 #else 72 #define SDRAM_OFFSET(x) 0x4##x 73 #define CONFIG_SYS_SDRAM_BASE 0x40000000 74 #define CONFIG_SYS_LOAD_ADDR 0x42000000 /* default load address */ 75 /* V3s do not have enough memory to place code at 0x4a000000 */ 76 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here 77 * since it needs to fit in with the other values. By also #defining it 78 * we get warnings if the Kconfig value mismatches. */ 79 #define CONFIG_SPL_STACK_R_ADDR 0x4fe00000 80 #define CONFIG_SPL_BSS_START_ADDR 0x4ff80000 81 #endif 82 83 #define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 /* 512 KiB */ 84 85 #ifdef CONFIG_SUNXI_HIGH_SRAM 86 /* 87 * The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is 88 * slightly bigger. Note that it is possible to map the first 32 KiB of the 89 * A1 at 0x00000000 like with older SoCs by writing 0x16aa0001 to the 90 * undocumented 0x008000e0 SYS_CTRL register. Where the 16aa is a key and 91 * the 1 actually activates the mapping of the first 32 KiB to 0x00000000. 92 */ 93 #define CONFIG_SYS_INIT_RAM_ADDR 0x10000 94 #define CONFIG_SYS_INIT_RAM_SIZE 0x08000 /* FIXME: 40 KiB ? */ 95 #else 96 #define CONFIG_SYS_INIT_RAM_ADDR 0x0 97 #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* 32 KiB */ 98 #endif 99 100 #define CONFIG_SYS_INIT_SP_OFFSET \ 101 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 102 #define CONFIG_SYS_INIT_SP_ADDR \ 103 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 104 105 #define CONFIG_NR_DRAM_BANKS 1 106 #define PHYS_SDRAM_0 CONFIG_SYS_SDRAM_BASE 107 #define PHYS_SDRAM_0_SIZE 0x80000000 /* 2 GiB */ 108 109 #ifdef CONFIG_AHCI 110 #define CONFIG_SCSI_AHCI_PLAT 111 #define CONFIG_SUNXI_AHCI 112 #define CONFIG_SYS_64BIT_LBA 113 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 114 #define CONFIG_SYS_SCSI_MAX_LUN 1 115 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 116 CONFIG_SYS_SCSI_MAX_LUN) 117 #endif 118 119 #define CONFIG_SETUP_MEMORY_TAGS 120 #define CONFIG_CMDLINE_TAG 121 #define CONFIG_INITRD_TAG 122 #define CONFIG_SERIAL_TAG 123 124 #ifdef CONFIG_NAND_SUNXI 125 #define CONFIG_SYS_NAND_MAX_ECCPOS 1664 126 #define CONFIG_SYS_NAND_ONFI_DETECTION 127 #define CONFIG_SYS_MAX_NAND_DEVICE 8 128 129 #define CONFIG_MTD_DEVICE 130 #define CONFIG_MTD_PARTITIONS 131 #endif 132 133 #ifdef CONFIG_SPL_SPI_SUNXI 134 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 135 #endif 136 137 /* mmc config */ 138 #ifdef CONFIG_MMC 139 #define CONFIG_MMC_SUNXI_SLOT 0 140 #endif 141 142 #if defined(CONFIG_ENV_IS_IN_MMC) 143 144 #ifdef CONFIG_ARM64 145 /* 146 * This is actually (CONFIG_ENV_OFFSET - 147 * (CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)), but the value will be used 148 * directly in a makefile, without the preprocessor expansion. 149 */ 150 #define CONFIG_BOARD_SIZE_LIMIT 0x7e000 151 #endif 152 153 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1 154 /* If we have two devices (most likely eMMC + MMC), favour the eMMC */ 155 #define CONFIG_SYS_MMC_ENV_DEV 1 156 #else 157 /* Otherwise, use the only device we have */ 158 #define CONFIG_SYS_MMC_ENV_DEV 0 159 #endif 160 #define CONFIG_SYS_MMC_MAX_DEVICE 4 161 #elif defined(CONFIG_ENV_IS_NOWHERE) 162 #define CONFIG_ENV_SIZE (128 << 10) 163 #endif 164 165 #ifndef CONFIG_MACH_SUN8I_V3S 166 /* 64MB of malloc() pool */ 167 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (64 << 20)) 168 #else 169 /* 2MB of malloc() pool */ 170 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (2 << 20)) 171 #endif 172 173 /* 174 * Miscellaneous configurable options 175 */ 176 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 177 #define CONFIG_SYS_PBSIZE 1024 /* Print Buffer Size */ 178 179 /* standalone support */ 180 #define CONFIG_STANDALONE_LOAD_ADDR CONFIG_SYS_LOAD_ADDR 181 182 /* FLASH and environment organization */ 183 184 #define CONFIG_SYS_MONITOR_LEN (768 << 10) /* 768 KiB */ 185 186 #ifndef CONFIG_ARM64 /* AArch64 FEL support is not ready yet */ 187 #define CONFIG_SPL_BOARD_LOAD_IMAGE 188 #endif 189 190 #ifdef CONFIG_SUNXI_HIGH_SRAM 191 #define CONFIG_SPL_TEXT_BASE 0x10060 /* sram start+header */ 192 #define CONFIG_SPL_MAX_SIZE 0x7fa0 /* 32 KiB */ 193 #ifdef CONFIG_ARM64 194 /* end of SRAM A2 for now, as SRAM A1 is pretty tight for an ARM64 build */ 195 #define LOW_LEVEL_SRAM_STACK 0x00054000 196 #else 197 #define LOW_LEVEL_SRAM_STACK 0x00018000 198 #endif /* !CONFIG_ARM64 */ 199 #else 200 #define CONFIG_SPL_TEXT_BASE 0x60 /* sram start+header */ 201 #define CONFIG_SPL_MAX_SIZE 0x5fa0 /* 24KB on sun4i/sun7i */ 202 #define LOW_LEVEL_SRAM_STACK 0x00008000 /* End of sram */ 203 #endif 204 205 #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK 206 207 #define CONFIG_SPL_PAD_TO 32768 /* decimal for 'dd' */ 208 209 210 /* I2C */ 211 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \ 212 defined CONFIG_SY8106A_POWER 213 #endif 214 215 #if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \ 216 defined CONFIG_I2C2_ENABLE || defined CONFIG_I2C3_ENABLE || \ 217 defined CONFIG_I2C4_ENABLE || defined CONFIG_R_I2C_ENABLE 218 #define CONFIG_SYS_I2C_MVTWSI 219 #ifndef CONFIG_DM_I2C 220 #define CONFIG_SYS_I2C 221 #define CONFIG_SYS_I2C_SPEED 400000 222 #define CONFIG_SYS_I2C_SLAVE 0x7f 223 #endif 224 #endif 225 226 #if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD) 227 #define CONFIG_SYS_I2C_SOFT 228 #define CONFIG_SYS_I2C_SOFT_SPEED 50000 229 #define CONFIG_SYS_I2C_SOFT_SLAVE 0x00 230 /* We use pin names in Kconfig and sunxi_name_to_gpio() */ 231 #define CONFIG_SOFT_I2C_GPIO_SDA soft_i2c_gpio_sda 232 #define CONFIG_SOFT_I2C_GPIO_SCL soft_i2c_gpio_scl 233 #ifndef __ASSEMBLY__ 234 extern int soft_i2c_gpio_sda; 235 extern int soft_i2c_gpio_scl; 236 #endif 237 #define CONFIG_VIDEO_LCD_I2C_BUS 0 /* The lcd panel soft i2c is bus 0 */ 238 #define CONFIG_SYS_SPD_BUS_NUM 1 /* And the axp209 i2c bus is bus 1 */ 239 #else 240 #define CONFIG_SYS_SPD_BUS_NUM 0 /* The axp209 i2c bus is bus 0 */ 241 #define CONFIG_VIDEO_LCD_I2C_BUS -1 /* NA, but necessary to compile */ 242 #endif 243 244 /* PMU */ 245 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \ 246 defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER || \ 247 defined CONFIG_SY8106A_POWER 248 #endif 249 250 #ifdef CONFIG_REQUIRE_SERIAL_CONSOLE 251 #if CONFIG_CONS_INDEX == 1 252 #ifdef CONFIG_MACH_SUN9I 253 #define OF_STDOUT_PATH "/soc/serial@07000000:115200" 254 #else 255 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28000:115200" 256 #endif 257 #elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I) 258 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28400:115200" 259 #elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I) 260 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28800:115200" 261 #elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I) 262 #define OF_STDOUT_PATH "/soc@01c00000/serial@01f02800:115200" 263 #else 264 #error Unsupported console port nr. Please fix stdout-path in sunxi-common.h. 265 #endif 266 #endif /* ifdef CONFIG_REQUIRE_SERIAL_CONSOLE */ 267 268 /* GPIO */ 269 #define CONFIG_SUNXI_GPIO 270 271 #ifdef CONFIG_VIDEO_SUNXI 272 /* 273 * The amount of RAM to keep free at the top of RAM when relocating u-boot, 274 * to use as framebuffer. This must be a multiple of 4096. 275 */ 276 #define CONFIG_SUNXI_MAX_FB_SIZE (16 << 20) 277 278 #define CONFIG_VIDEO_LOGO 279 #define CONFIG_VIDEO_STD_TIMINGS 280 #define CONFIG_I2C_EDID 281 #define VIDEO_LINE_LEN (pGD->plnSizeX) 282 283 /* allow both serial and cfb console. */ 284 /* stop x86 thinking in cfbconsole from trying to init a pc keyboard */ 285 286 #endif /* CONFIG_VIDEO_SUNXI */ 287 288 /* Ethernet support */ 289 #ifdef CONFIG_SUN4I_EMAC 290 #define CONFIG_MII /* MII PHY management */ 291 #endif 292 293 #ifdef CONFIG_SUN7I_GMAC 294 #define CONFIG_MII /* MII PHY management */ 295 #define CONFIG_PHY_REALTEK 296 #endif 297 298 #ifdef CONFIG_USB_EHCI_HCD 299 #define CONFIG_USB_OHCI_NEW 300 #define CONFIG_USB_OHCI_SUNXI 301 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 302 #endif 303 304 #ifdef CONFIG_USB_FUNCTION_MASS_STORAGE 305 #endif 306 307 #ifdef CONFIG_USB_KEYBOARD 308 #define CONFIG_PREBOOT 309 #endif 310 311 #define CONFIG_MISC_INIT_R 312 313 #ifndef CONFIG_SPL_BUILD 314 315 #ifdef CONFIG_ARM64 316 /* 317 * Boards seem to come with at least 512MB of DRAM. 318 * The kernel should go at 512K, which is the default text offset (that will 319 * be adjusted at runtime if needed). 320 * There is no compression for arm64 kernels (yet), so leave some space 321 * for really big kernels, say 256MB for now. 322 * Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd. 323 * Align the initrd to a 2MB page. 324 */ 325 #define BOOTM_SIZE __stringify(0xa000000) 326 #define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(0080000)) 327 #define FDT_ADDR_R __stringify(SDRAM_OFFSET(FA00000)) 328 #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(FC00000)) 329 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(FD00000)) 330 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(FE00000)) 331 332 #else 333 /* 334 * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc. 335 * 32M uncompressed kernel, 16M compressed kernel, 1M fdt, 336 * 1M script, 1M pxe and the ramdisk at the end. 337 */ 338 #ifndef CONFIG_MACH_SUN8I_V3S 339 #define BOOTM_SIZE __stringify(0xa000000) 340 #define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(2000000)) 341 #define FDT_ADDR_R __stringify(SDRAM_OFFSET(3000000)) 342 #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(3100000)) 343 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000)) 344 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3300000)) 345 #else 346 /* 347 * 64M RAM minus 2MB heap + 16MB for u-boot, stack, fb, etc. 348 * 16M uncompressed kernel, 8M compressed kernel, 1M fdt, 349 * 1M script, 1M pxe and the ramdisk at the end. 350 */ 351 #define BOOTM_SIZE __stringify(0x2e00000) 352 #define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(1000000)) 353 #define FDT_ADDR_R __stringify(SDRAM_OFFSET(1800000)) 354 #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(1900000)) 355 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(1A00000)) 356 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(1B00000)) 357 #endif 358 #endif 359 360 #define MEM_LAYOUT_ENV_SETTINGS \ 361 "bootm_size=" BOOTM_SIZE "\0" \ 362 "kernel_addr_r=" KERNEL_ADDR_R "\0" \ 363 "fdt_addr_r=" FDT_ADDR_R "\0" \ 364 "scriptaddr=" SCRIPT_ADDR_R "\0" \ 365 "pxefile_addr_r=" PXEFILE_ADDR_R "\0" \ 366 "ramdisk_addr_r=" RAMDISK_ADDR_R "\0" 367 368 #define DFU_ALT_INFO_RAM \ 369 "dfu_alt_info_ram=" \ 370 "kernel ram " KERNEL_ADDR_R " 0x1000000;" \ 371 "fdt ram " FDT_ADDR_R " 0x100000;" \ 372 "ramdisk ram " RAMDISK_ADDR_R " 0x4000000\0" 373 374 #ifdef CONFIG_MMC 375 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1 376 #define BOOTENV_DEV_MMC_AUTO(devtypeu, devtypel, instance) \ 377 BOOTENV_DEV_MMC(MMC, mmc, 0) \ 378 BOOTENV_DEV_MMC(MMC, mmc, 1) \ 379 "bootcmd_mmc_auto=" \ 380 "if test ${mmc_bootdev} -eq 1; then " \ 381 "run bootcmd_mmc1; " \ 382 "run bootcmd_mmc0; " \ 383 "elif test ${mmc_bootdev} -eq 0; then " \ 384 "run bootcmd_mmc0; " \ 385 "run bootcmd_mmc1; " \ 386 "fi\0" 387 388 #define BOOTENV_DEV_NAME_MMC_AUTO(devtypeu, devtypel, instance) \ 389 "mmc_auto " 390 391 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC_AUTO, mmc_auto, na) 392 #else 393 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) 394 #endif 395 #else 396 #define BOOT_TARGET_DEVICES_MMC(func) 397 #endif 398 399 #ifdef CONFIG_AHCI 400 #define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0) 401 #else 402 #define BOOT_TARGET_DEVICES_SCSI(func) 403 #endif 404 405 #ifdef CONFIG_USB_STORAGE 406 #define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) 407 #else 408 #define BOOT_TARGET_DEVICES_USB(func) 409 #endif 410 411 /* FEL boot support, auto-execute boot.scr if a script address was provided */ 412 #define BOOTENV_DEV_FEL(devtypeu, devtypel, instance) \ 413 "bootcmd_fel=" \ 414 "if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then " \ 415 "echo '(FEL boot)'; " \ 416 "source ${fel_scriptaddr}; " \ 417 "fi\0" 418 #define BOOTENV_DEV_NAME_FEL(devtypeu, devtypel, instance) \ 419 "fel " 420 421 #define BOOT_TARGET_DEVICES(func) \ 422 func(FEL, fel, na) \ 423 BOOT_TARGET_DEVICES_MMC(func) \ 424 BOOT_TARGET_DEVICES_SCSI(func) \ 425 BOOT_TARGET_DEVICES_USB(func) \ 426 func(PXE, pxe, na) \ 427 func(DHCP, dhcp, na) 428 429 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT 430 #define BOOTCMD_SUNXI_COMPAT \ 431 "bootcmd_sunxi_compat=" \ 432 "setenv root /dev/mmcblk0p3 rootwait; " \ 433 "if ext2load mmc 0 0x44000000 uEnv.txt; then " \ 434 "echo Loaded environment from uEnv.txt; " \ 435 "env import -t 0x44000000 ${filesize}; " \ 436 "fi; " \ 437 "setenv bootargs console=${console} root=${root} ${extraargs}; " \ 438 "ext2load mmc 0 0x43000000 script.bin && " \ 439 "ext2load mmc 0 0x48000000 uImage && " \ 440 "bootm 0x48000000\0" 441 #else 442 #define BOOTCMD_SUNXI_COMPAT 443 #endif 444 445 #include <config_distro_bootcmd.h> 446 447 #ifdef CONFIG_USB_KEYBOARD 448 #define CONSOLE_STDIN_SETTINGS \ 449 "preboot=usb start\0" \ 450 "stdin=serial,usbkbd\0" 451 #else 452 #define CONSOLE_STDIN_SETTINGS \ 453 "stdin=serial\0" 454 #endif 455 456 #ifdef CONFIG_VIDEO 457 #define CONSOLE_STDOUT_SETTINGS \ 458 "stdout=serial,vga\0" \ 459 "stderr=serial,vga\0" 460 #elif CONFIG_DM_VIDEO 461 #define CONFIG_SYS_WHITE_ON_BLACK 462 #define CONSOLE_STDOUT_SETTINGS \ 463 "stdout=serial,vidconsole\0" \ 464 "stderr=serial,vidconsole\0" 465 #else 466 #define CONSOLE_STDOUT_SETTINGS \ 467 "stdout=serial\0" \ 468 "stderr=serial\0" 469 #endif 470 471 #ifdef CONFIG_MTDIDS_DEFAULT 472 #define SUNXI_MTDIDS_DEFAULT \ 473 "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" 474 #else 475 #define SUNXI_MTDIDS_DEFAULT 476 #endif 477 478 #ifdef CONFIG_MTDPARTS_DEFAULT 479 #define SUNXI_MTDPARTS_DEFAULT \ 480 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" 481 #else 482 #define SUNXI_MTDPARTS_DEFAULT 483 #endif 484 485 #define PARTS_DEFAULT \ 486 "name=loader1,start=8k,size=32k,uuid=${uuid_gpt_loader1};" \ 487 "name=loader2,size=984k,uuid=${uuid_gpt_loader2};" \ 488 "name=esp,size=128M,bootable,uuid=${uuid_gpt_esp};" \ 489 "name=system,size=-,uuid=${uuid_gpt_system};" 490 491 #define UUID_GPT_ESP "c12a7328-f81f-11d2-ba4b-00a0c93ec93b" 492 493 #ifdef CONFIG_ARM64 494 #define UUID_GPT_SYSTEM "b921b045-1df0-41c3-af44-4c6f280d3fae" 495 #else 496 #define UUID_GPT_SYSTEM "69dad710-2ce4-4e3c-b16c-21a1d49abed3" 497 #endif 498 499 #define CONSOLE_ENV_SETTINGS \ 500 CONSOLE_STDIN_SETTINGS \ 501 CONSOLE_STDOUT_SETTINGS 502 503 #ifdef CONFIG_ARM64 504 #define FDTFILE "allwinner/" CONFIG_DEFAULT_DEVICE_TREE ".dtb" 505 #else 506 #define FDTFILE CONFIG_DEFAULT_DEVICE_TREE ".dtb" 507 #endif 508 509 #define CONFIG_EXTRA_ENV_SETTINGS \ 510 CONSOLE_ENV_SETTINGS \ 511 MEM_LAYOUT_ENV_SETTINGS \ 512 DFU_ALT_INFO_RAM \ 513 "fdtfile=" FDTFILE "\0" \ 514 "console=ttyS0,115200\0" \ 515 SUNXI_MTDIDS_DEFAULT \ 516 SUNXI_MTDPARTS_DEFAULT \ 517 "uuid_gpt_esp=" UUID_GPT_ESP "\0" \ 518 "uuid_gpt_system=" UUID_GPT_SYSTEM "\0" \ 519 "partitions=" PARTS_DEFAULT "\0" \ 520 BOOTCMD_SUNXI_COMPAT \ 521 BOOTENV 522 523 #else /* ifndef CONFIG_SPL_BUILD */ 524 #define CONFIG_EXTRA_ENV_SETTINGS 525 #endif 526 527 #endif /* _SUNXI_COMMON_CONFIG_H */ 528