1 /* 2 * (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net> 3 * 4 * (C) Copyright 2007-2011 5 * Allwinner Technology Co., Ltd. <www.allwinnertech.com> 6 * Tom Cubie <tangliang@allwinnertech.com> 7 * 8 * Configuration settings for the Allwinner sunxi series of boards. 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 #ifndef _SUNXI_COMMON_CONFIG_H 14 #define _SUNXI_COMMON_CONFIG_H 15 16 #include <asm/arch/cpu.h> 17 #include <linux/stringify.h> 18 19 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT 20 /* 21 * The U-Boot workarounds bugs in the outdated buggy sunxi-3.4 kernels at the 22 * expense of restricting some features, so the regular machine id values can 23 * be used. 24 */ 25 # define CONFIG_MACH_TYPE_COMPAT_REV 0 26 #else 27 /* 28 * A compatibility guard to prevent loading outdated buggy sunxi-3.4 kernels. 29 * Only sunxi-3.4 kernels with appropriate fixes applied are able to pass 30 * beyond the machine id check. 31 */ 32 # define CONFIG_MACH_TYPE_COMPAT_REV 1 33 #endif 34 35 /* 36 * High Level Configuration Options 37 */ 38 #if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_ARM64) 39 #define CONFIG_SYS_THUMB_BUILD /* Thumbs mode to save space in SPL */ 40 #endif 41 42 /* Serial & console */ 43 #define CONFIG_SYS_NS16550_SERIAL 44 /* ns16550 reg in the low bits of cpu reg */ 45 #define CONFIG_SYS_NS16550_CLK 24000000 46 #ifndef CONFIG_DM_SERIAL 47 # define CONFIG_SYS_NS16550_REG_SIZE -4 48 # define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE 49 # define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE 50 # define CONFIG_SYS_NS16550_COM3 SUNXI_UART2_BASE 51 # define CONFIG_SYS_NS16550_COM4 SUNXI_UART3_BASE 52 # define CONFIG_SYS_NS16550_COM5 SUNXI_R_UART_BASE 53 #endif 54 55 /* CPU */ 56 #define CONFIG_TIMER_CLK_FREQ 24000000 57 58 /* 59 * The DRAM Base differs between some models. We cannot use macros for the 60 * CONFIG_FOO defines which contain the DRAM base address since they end 61 * up unexpanded in include/autoconf.mk . 62 * 63 * So we have to have this #ifdef #else #endif block for these. 64 */ 65 #ifdef CONFIG_MACH_SUN9I 66 #define SDRAM_OFFSET(x) 0x2##x 67 #define CONFIG_SYS_SDRAM_BASE 0x20000000 68 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* default load address */ 69 #define CONFIG_SYS_TEXT_BASE 0x2a000000 70 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here 71 * since it needs to fit in with the other values. By also #defining it 72 * we get warnings if the Kconfig value mismatches. */ 73 #define CONFIG_SPL_STACK_R_ADDR 0x2fe00000 74 #define CONFIG_SPL_BSS_START_ADDR 0x2ff80000 75 #else 76 #define SDRAM_OFFSET(x) 0x4##x 77 #define CONFIG_SYS_SDRAM_BASE 0x40000000 78 #define CONFIG_SYS_LOAD_ADDR 0x42000000 /* default load address */ 79 #define CONFIG_SYS_TEXT_BASE 0x4a000000 80 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here 81 * since it needs to fit in with the other values. By also #defining it 82 * we get warnings if the Kconfig value mismatches. */ 83 #define CONFIG_SPL_STACK_R_ADDR 0x4fe00000 84 #define CONFIG_SPL_BSS_START_ADDR 0x4ff80000 85 #endif 86 87 #define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 /* 512 KiB */ 88 89 #if defined(CONFIG_MACH_SUN9I) || defined(CONFIG_MACH_SUN50I) 90 /* 91 * The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is 92 * slightly bigger. Note that it is possible to map the first 32 KiB of the 93 * A1 at 0x00000000 like with older SoCs by writing 0x16aa0001 to the 94 * undocumented 0x008000e0 SYS_CTRL register. Where the 16aa is a key and 95 * the 1 actually activates the mapping of the first 32 KiB to 0x00000000. 96 */ 97 #define CONFIG_SYS_INIT_RAM_ADDR 0x10000 98 #define CONFIG_SYS_INIT_RAM_SIZE 0x08000 /* FIXME: 40 KiB ? */ 99 #else 100 #define CONFIG_SYS_INIT_RAM_ADDR 0x0 101 #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* 32 KiB */ 102 #endif 103 104 #define CONFIG_SYS_INIT_SP_OFFSET \ 105 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 106 #define CONFIG_SYS_INIT_SP_ADDR \ 107 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 108 109 #define CONFIG_NR_DRAM_BANKS 1 110 #define PHYS_SDRAM_0 CONFIG_SYS_SDRAM_BASE 111 #define PHYS_SDRAM_0_SIZE 0x80000000 /* 2 GiB */ 112 113 #ifdef CONFIG_AHCI 114 #define CONFIG_LIBATA 115 #define CONFIG_SCSI_AHCI 116 #define CONFIG_SCSI_AHCI_PLAT 117 #define CONFIG_SUNXI_AHCI 118 #define CONFIG_SYS_64BIT_LBA 119 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 120 #define CONFIG_SYS_SCSI_MAX_LUN 1 121 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 122 CONFIG_SYS_SCSI_MAX_LUN) 123 #define CONFIG_SCSI 124 #endif 125 126 #define CONFIG_SETUP_MEMORY_TAGS 127 #define CONFIG_CMDLINE_TAG 128 #define CONFIG_INITRD_TAG 129 #define CONFIG_SERIAL_TAG 130 131 #ifdef CONFIG_NAND_SUNXI 132 #define CONFIG_SYS_NAND_MAX_ECCPOS 1664 133 #define CONFIG_SYS_NAND_ONFI_DETECTION 134 #define CONFIG_SYS_MAX_NAND_DEVICE 8 135 #endif 136 137 #ifdef CONFIG_SPL_SPI_SUNXI 138 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 139 #endif 140 141 /* mmc config */ 142 #ifdef CONFIG_MMC 143 #define CONFIG_MMC_SUNXI_SLOT 0 144 #define CONFIG_ENV_IS_IN_MMC 145 #define CONFIG_SYS_MMC_ENV_DEV 0 /* first detected MMC controller */ 146 #define CONFIG_SYS_MMC_MAX_DEVICE 4 147 #endif 148 149 /* 64MB of malloc() pool */ 150 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (64 << 20)) 151 152 /* 153 * Miscellaneous configurable options 154 */ 155 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 156 #define CONFIG_SYS_PBSIZE 1024 /* Print Buffer Size */ 157 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 158 159 /* Boot Argument Buffer Size */ 160 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 161 162 /* standalone support */ 163 #define CONFIG_STANDALONE_LOAD_ADDR CONFIG_SYS_LOAD_ADDR 164 165 /* baudrate */ 166 #define CONFIG_BAUDRATE 115200 167 168 /* The stack sizes are set up in start.S using the settings below */ 169 #define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */ 170 171 /* FLASH and environment organization */ 172 173 #define CONFIG_SYS_MONITOR_LEN (768 << 10) /* 768 KiB */ 174 175 #define CONFIG_ENV_OFFSET (544 << 10) /* (8 + 24 + 512) KiB */ 176 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ 177 178 #define CONFIG_FAT_WRITE /* enable write access */ 179 180 #define CONFIG_SPL_FRAMEWORK 181 182 #ifndef CONFIG_ARM64 /* AArch64 FEL support is not ready yet */ 183 #define CONFIG_SPL_BOARD_LOAD_IMAGE 184 #endif 185 186 #if defined(CONFIG_MACH_SUN9I) 187 #define CONFIG_SPL_TEXT_BASE 0x10040 /* sram start+header */ 188 #define CONFIG_SPL_MAX_SIZE 0x5fc0 /* ? KiB on sun9i */ 189 #elif defined(CONFIG_MACH_SUN50I) 190 #define CONFIG_SPL_TEXT_BASE 0x10040 /* sram start+header */ 191 #define CONFIG_SPL_MAX_SIZE 0x7fc0 /* 32 KiB on sun50i */ 192 #else 193 #define CONFIG_SPL_TEXT_BASE 0x40 /* sram start+header */ 194 #define CONFIG_SPL_MAX_SIZE 0x5fc0 /* 24KB on sun4i/sun7i */ 195 #endif 196 197 #ifndef CONFIG_ARM64 198 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds" 199 #endif 200 201 #define CONFIG_SPL_PAD_TO 32768 /* decimal for 'dd' */ 202 203 #if defined(CONFIG_MACH_SUN9I) || defined(CONFIG_MACH_SUN50I) 204 /* FIXME: 40 KiB instead of 32 KiB ? */ 205 #define LOW_LEVEL_SRAM_STACK 0x00018000 206 #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK 207 #else 208 /* end of 32 KiB in sram */ 209 #define LOW_LEVEL_SRAM_STACK 0x00008000 /* End of sram */ 210 #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK 211 #endif 212 213 /* I2C */ 214 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \ 215 defined CONFIG_SY8106A_POWER 216 #endif 217 218 #if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \ 219 defined CONFIG_I2C2_ENABLE || defined CONFIG_I2C3_ENABLE || \ 220 defined CONFIG_I2C4_ENABLE || defined CONFIG_R_I2C_ENABLE 221 #define CONFIG_SYS_I2C 222 #define CONFIG_SYS_I2C_MVTWSI 223 #define CONFIG_SYS_I2C_SPEED 400000 224 #define CONFIG_SYS_I2C_SLAVE 0x7f 225 #endif 226 227 #if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD) 228 #define CONFIG_SYS_I2C_SOFT 229 #define CONFIG_SYS_I2C_SOFT_SPEED 50000 230 #define CONFIG_SYS_I2C_SOFT_SLAVE 0x00 231 /* We use pin names in Kconfig and sunxi_name_to_gpio() */ 232 #define CONFIG_SOFT_I2C_GPIO_SDA soft_i2c_gpio_sda 233 #define CONFIG_SOFT_I2C_GPIO_SCL soft_i2c_gpio_scl 234 #ifndef __ASSEMBLY__ 235 extern int soft_i2c_gpio_sda; 236 extern int soft_i2c_gpio_scl; 237 #endif 238 #define CONFIG_VIDEO_LCD_I2C_BUS 0 /* The lcd panel soft i2c is bus 0 */ 239 #define CONFIG_SYS_SPD_BUS_NUM 1 /* And the axp209 i2c bus is bus 1 */ 240 #else 241 #define CONFIG_SYS_SPD_BUS_NUM 0 /* The axp209 i2c bus is bus 0 */ 242 #define CONFIG_VIDEO_LCD_I2C_BUS -1 /* NA, but necessary to compile */ 243 #endif 244 245 /* PMU */ 246 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \ 247 defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER || \ 248 defined CONFIG_SY8106A_POWER 249 #endif 250 251 #ifndef CONFIG_CONS_INDEX 252 #define CONFIG_CONS_INDEX 1 /* UART0 */ 253 #endif 254 255 #ifdef CONFIG_REQUIRE_SERIAL_CONSOLE 256 #if CONFIG_CONS_INDEX == 1 257 #ifdef CONFIG_MACH_SUN9I 258 #define OF_STDOUT_PATH "/soc/serial@07000000:115200" 259 #else 260 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28000:115200" 261 #endif 262 #elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I) 263 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28400:115200" 264 #elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I) 265 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28800:115200" 266 #elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I) 267 #define OF_STDOUT_PATH "/soc@01c00000/serial@01f02800:115200" 268 #else 269 #error Unsupported console port nr. Please fix stdout-path in sunxi-common.h. 270 #endif 271 #endif /* ifdef CONFIG_REQUIRE_SERIAL_CONSOLE */ 272 273 /* GPIO */ 274 #define CONFIG_SUNXI_GPIO 275 276 #ifdef CONFIG_VIDEO 277 /* 278 * The amount of RAM to keep free at the top of RAM when relocating u-boot, 279 * to use as framebuffer. This must be a multiple of 4096. 280 */ 281 #define CONFIG_SUNXI_MAX_FB_SIZE (16 << 20) 282 283 /* Do we want to initialize a simple FB? */ 284 #define CONFIG_VIDEO_DT_SIMPLEFB 285 286 #define CONFIG_VIDEO_SUNXI 287 288 #define CONFIG_VIDEO_LOGO 289 #define CONFIG_VIDEO_STD_TIMINGS 290 #define CONFIG_I2C_EDID 291 #define VIDEO_LINE_LEN (pGD->plnSizeX) 292 293 /* allow both serial and cfb console. */ 294 /* stop x86 thinking in cfbconsole from trying to init a pc keyboard */ 295 296 #endif /* CONFIG_VIDEO */ 297 298 /* Ethernet support */ 299 #ifdef CONFIG_SUNXI_EMAC 300 #define CONFIG_PHY_ADDR 1 301 #define CONFIG_MII /* MII PHY management */ 302 #define CONFIG_PHYLIB 303 #endif 304 305 #ifdef CONFIG_SUNXI_GMAC 306 #define CONFIG_PHY_GIGE /* GMAC can use gigabit PHY */ 307 #define CONFIG_PHY_ADDR 1 308 #define CONFIG_MII /* MII PHY management */ 309 #define CONFIG_PHY_REALTEK 310 #endif 311 312 #ifdef CONFIG_USB_EHCI_HCD 313 #define CONFIG_USB_OHCI_NEW 314 #define CONFIG_USB_OHCI_SUNXI 315 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 316 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1 317 #endif 318 319 #ifdef CONFIG_USB_MUSB_SUNXI 320 #define CONFIG_USB_MUSB_PIO_ONLY 321 #endif 322 323 #ifdef CONFIG_USB_MUSB_GADGET 324 #define CONFIG_USB_FUNCTION_FASTBOOT 325 #define CONFIG_USB_FUNCTION_MASS_STORAGE 326 #endif 327 328 #ifdef CONFIG_USB_FUNCTION_FASTBOOT 329 #define CONFIG_CMD_FASTBOOT 330 #define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR 331 #define CONFIG_FASTBOOT_BUF_SIZE 0x2000000 332 #define CONFIG_ANDROID_BOOT_IMAGE 333 334 #define CONFIG_FASTBOOT_FLASH 335 336 #ifdef CONFIG_MMC 337 #define CONFIG_FASTBOOT_FLASH_MMC_DEV 0 338 #endif 339 #endif 340 341 #ifdef CONFIG_USB_FUNCTION_MASS_STORAGE 342 #endif 343 344 #ifdef CONFIG_USB_KEYBOARD 345 #define CONFIG_PREBOOT 346 #define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE 347 #endif 348 349 #if !defined CONFIG_ENV_IS_IN_MMC && \ 350 !defined CONFIG_ENV_IS_IN_NAND && \ 351 !defined CONFIG_ENV_IS_IN_FAT && \ 352 !defined CONFIG_ENV_IS_IN_SPI_FLASH 353 #define CONFIG_ENV_IS_NOWHERE 354 #endif 355 356 #define CONFIG_MISC_INIT_R 357 358 #ifndef CONFIG_SPL_BUILD 359 #include <config_distro_defaults.h> 360 361 #ifdef CONFIG_ARM64 362 /* 363 * Boards seem to come with at least 512MB of DRAM. 364 * The kernel should go at 512K, which is the default text offset (that will 365 * be adjusted at runtime if needed). 366 * There is no compression for arm64 kernels (yet), so leave some space 367 * for really big kernels, say 256MB for now. 368 * Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd. 369 * Align the initrd to a 2MB page. 370 */ 371 #define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(0080000)) 372 #define FDT_ADDR_R __stringify(SDRAM_OFFSET(FA00000)) 373 #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(FC00000)) 374 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(FD00000)) 375 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(FE00000)) 376 377 #else 378 /* 379 * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc. 380 * 32M uncompressed kernel, 16M compressed kernel, 1M fdt, 381 * 1M script, 1M pxe and the ramdisk at the end. 382 */ 383 384 #define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(2000000)) 385 #define FDT_ADDR_R __stringify(SDRAM_OFFSET(3000000)) 386 #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(3100000)) 387 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000)) 388 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3300000)) 389 #endif 390 391 #define MEM_LAYOUT_ENV_SETTINGS \ 392 "bootm_size=0xa000000\0" \ 393 "kernel_addr_r=" KERNEL_ADDR_R "\0" \ 394 "fdt_addr_r=" FDT_ADDR_R "\0" \ 395 "scriptaddr=" SCRIPT_ADDR_R "\0" \ 396 "pxefile_addr_r=" PXEFILE_ADDR_R "\0" \ 397 "ramdisk_addr_r=" RAMDISK_ADDR_R "\0" 398 399 #define DFU_ALT_INFO_RAM \ 400 "dfu_alt_info_ram=" \ 401 "kernel ram " KERNEL_ADDR_R " 0x1000000;" \ 402 "fdt ram " FDT_ADDR_R " 0x100000;" \ 403 "ramdisk ram " RAMDISK_ADDR_R " 0x4000000\0" 404 405 #ifdef CONFIG_MMC 406 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) 407 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1 408 #define BOOT_TARGET_DEVICES_MMC_EXTRA(func) func(MMC, mmc, 1) 409 #else 410 #define BOOT_TARGET_DEVICES_MMC_EXTRA(func) 411 #endif 412 #else 413 #define BOOT_TARGET_DEVICES_MMC(func) 414 #define BOOT_TARGET_DEVICES_MMC_EXTRA(func) 415 #endif 416 417 #ifdef CONFIG_AHCI 418 #define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0) 419 #else 420 #define BOOT_TARGET_DEVICES_SCSI(func) 421 #endif 422 423 #ifdef CONFIG_USB_STORAGE 424 #define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) 425 #else 426 #define BOOT_TARGET_DEVICES_USB(func) 427 #endif 428 429 /* FEL boot support, auto-execute boot.scr if a script address was provided */ 430 #define BOOTENV_DEV_FEL(devtypeu, devtypel, instance) \ 431 "bootcmd_fel=" \ 432 "if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then " \ 433 "echo '(FEL boot)'; " \ 434 "source ${fel_scriptaddr}; " \ 435 "fi\0" 436 #define BOOTENV_DEV_NAME_FEL(devtypeu, devtypel, instance) \ 437 "fel " 438 439 #define BOOT_TARGET_DEVICES(func) \ 440 func(FEL, fel, na) \ 441 BOOT_TARGET_DEVICES_MMC(func) \ 442 BOOT_TARGET_DEVICES_MMC_EXTRA(func) \ 443 BOOT_TARGET_DEVICES_SCSI(func) \ 444 BOOT_TARGET_DEVICES_USB(func) \ 445 func(PXE, pxe, na) \ 446 func(DHCP, dhcp, na) 447 448 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT 449 #define BOOTCMD_SUNXI_COMPAT \ 450 "bootcmd_sunxi_compat=" \ 451 "setenv root /dev/mmcblk0p3 rootwait; " \ 452 "if ext2load mmc 0 0x44000000 uEnv.txt; then " \ 453 "echo Loaded environment from uEnv.txt; " \ 454 "env import -t 0x44000000 ${filesize}; " \ 455 "fi; " \ 456 "setenv bootargs console=${console} root=${root} ${extraargs}; " \ 457 "ext2load mmc 0 0x43000000 script.bin && " \ 458 "ext2load mmc 0 0x48000000 uImage && " \ 459 "bootm 0x48000000\0" 460 #else 461 #define BOOTCMD_SUNXI_COMPAT 462 #endif 463 464 #include <config_distro_bootcmd.h> 465 466 #ifdef CONFIG_USB_KEYBOARD 467 #define CONSOLE_STDIN_SETTINGS \ 468 "preboot=usb start\0" \ 469 "stdin=serial,usbkbd\0" 470 #else 471 #define CONSOLE_STDIN_SETTINGS \ 472 "stdin=serial\0" 473 #endif 474 475 #ifdef CONFIG_VIDEO 476 #define CONSOLE_STDOUT_SETTINGS \ 477 "stdout=serial,vga\0" \ 478 "stderr=serial,vga\0" 479 #else 480 #define CONSOLE_STDOUT_SETTINGS \ 481 "stdout=serial\0" \ 482 "stderr=serial\0" 483 #endif 484 485 #define CONSOLE_ENV_SETTINGS \ 486 CONSOLE_STDIN_SETTINGS \ 487 CONSOLE_STDOUT_SETTINGS 488 489 #define CONFIG_EXTRA_ENV_SETTINGS \ 490 CONSOLE_ENV_SETTINGS \ 491 MEM_LAYOUT_ENV_SETTINGS \ 492 DFU_ALT_INFO_RAM \ 493 "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \ 494 "console=ttyS0,115200\0" \ 495 BOOTCMD_SUNXI_COMPAT \ 496 BOOTENV 497 498 #else /* ifndef CONFIG_SPL_BUILD */ 499 #define CONFIG_EXTRA_ENV_SETTINGS 500 #endif 501 502 #endif /* _SUNXI_COMMON_CONFIG_H */ 503