1 /* 2 * (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net> 3 * 4 * (C) Copyright 2007-2011 5 * Allwinner Technology Co., Ltd. <www.allwinnertech.com> 6 * Tom Cubie <tangliang@allwinnertech.com> 7 * 8 * Configuration settings for the Allwinner sunxi series of boards. 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 #ifndef _SUNXI_COMMON_CONFIG_H 14 #define _SUNXI_COMMON_CONFIG_H 15 16 #include <linux/stringify.h> 17 18 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT 19 /* 20 * The U-Boot workarounds bugs in the outdated buggy sunxi-3.4 kernels at the 21 * expense of restricting some features, so the regular machine id values can 22 * be used. 23 */ 24 # define CONFIG_MACH_TYPE_COMPAT_REV 0 25 #else 26 /* 27 * A compatibility guard to prevent loading outdated buggy sunxi-3.4 kernels. 28 * Only sunxi-3.4 kernels with appropriate fixes applied are able to pass 29 * beyond the machine id check. 30 */ 31 # define CONFIG_MACH_TYPE_COMPAT_REV 1 32 #endif 33 34 /* 35 * High Level Configuration Options 36 */ 37 #define CONFIG_SUNXI /* sunxi family */ 38 #ifdef CONFIG_SPL_BUILD 39 #define CONFIG_SYS_THUMB_BUILD /* Thumbs mode to save space in SPL */ 40 #endif 41 42 #include <asm/arch/cpu.h> /* get chip and board defs */ 43 44 #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_DM_SERIAL) 45 # define CONFIG_DW_SERIAL 46 #endif 47 48 /* 49 * Display CPU information 50 */ 51 #define CONFIG_DISPLAY_CPUINFO 52 53 #define CONFIG_SYS_PROMPT "sunxi# " 54 55 /* Serial & console */ 56 #define CONFIG_SYS_NS16550 57 #define CONFIG_SYS_NS16550_SERIAL 58 /* ns16550 reg in the low bits of cpu reg */ 59 #define CONFIG_SYS_NS16550_CLK 24000000 60 #ifndef CONFIG_DM_SERIAL 61 # define CONFIG_SYS_NS16550_REG_SIZE -4 62 # define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE 63 # define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE 64 # define CONFIG_SYS_NS16550_COM3 SUNXI_UART2_BASE 65 # define CONFIG_SYS_NS16550_COM4 SUNXI_UART3_BASE 66 # define CONFIG_SYS_NS16550_COM5 SUNXI_R_UART_BASE 67 #endif 68 69 /* CPU */ 70 #define CONFIG_SYS_CACHELINE_SIZE 64 71 72 /* 73 * The DRAM Base differs between some models. We cannot use macros for the 74 * CONFIG_FOO defines which contain the DRAM base address since they end 75 * up unexpanded in include/autoconf.mk . 76 * 77 * So we have to have this #ifdef #else #endif block for these. 78 */ 79 #ifdef CONFIG_MACH_SUN9I 80 #define SDRAM_OFFSET(x) 0x2##x 81 #define CONFIG_SYS_SDRAM_BASE 0x20000000 82 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* default load address */ 83 #define CONFIG_SYS_TEXT_BASE 0x2a000000 84 #define CONFIG_PRE_CON_BUF_ADDR 0x2f000000 85 #define CONFIG_SYS_SPL_MALLOC_START 0x2ff00000 86 #define CONFIG_SPL_BSS_START_ADDR 0x2ff80000 87 #else 88 #define SDRAM_OFFSET(x) 0x4##x 89 #define CONFIG_SYS_SDRAM_BASE 0x40000000 90 #define CONFIG_SYS_LOAD_ADDR 0x42000000 /* default load address */ 91 #define CONFIG_SYS_TEXT_BASE 0x4a000000 92 #define CONFIG_PRE_CON_BUF_ADDR 0x4f000000 93 #define CONFIG_SYS_SPL_MALLOC_START 0x4ff00000 94 #define CONFIG_SPL_BSS_START_ADDR 0x4ff80000 95 #endif 96 97 #define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 /* 512 KiB */ 98 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 /* 512 KiB */ 99 100 #ifdef CONFIG_MACH_SUN9I 101 /* 102 * The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is 103 * slightly bigger. Note that it is possible to map the first 32 KiB of the 104 * A1 at 0x00000000 like with older SoCs by writing 0x16aa0001 to the 105 * undocumented 0x008000e0 SYS_CTRL register. Where the 16aa is a key and 106 * the 1 actually activates the mapping of the first 32 KiB to 0x00000000. 107 */ 108 #define CONFIG_SYS_INIT_RAM_ADDR 0x10000 109 #define CONFIG_SYS_INIT_RAM_SIZE 0x0a000 /* 40 KiB */ 110 #else 111 #define CONFIG_SYS_INIT_RAM_ADDR 0x0 112 #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* 32 KiB */ 113 #endif 114 115 #define CONFIG_SYS_INIT_SP_OFFSET \ 116 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 117 #define CONFIG_SYS_INIT_SP_ADDR \ 118 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 119 120 #define CONFIG_NR_DRAM_BANKS 1 121 #define PHYS_SDRAM_0 CONFIG_SYS_SDRAM_BASE 122 #define PHYS_SDRAM_0_SIZE 0x80000000 /* 2 GiB */ 123 124 #ifdef CONFIG_AHCI 125 #define CONFIG_LIBATA 126 #define CONFIG_SCSI_AHCI 127 #define CONFIG_SCSI_AHCI_PLAT 128 #define CONFIG_SUNXI_AHCI 129 #define CONFIG_SYS_64BIT_LBA 130 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 131 #define CONFIG_SYS_SCSI_MAX_LUN 1 132 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 133 CONFIG_SYS_SCSI_MAX_LUN) 134 #define CONFIG_CMD_SCSI 135 #endif 136 137 #define CONFIG_SETUP_MEMORY_TAGS 138 #define CONFIG_CMDLINE_TAG 139 #define CONFIG_INITRD_TAG 140 #define CONFIG_SERIAL_TAG 141 142 #if defined(CONFIG_SPL_NAND_SUNXI) 143 #define CONFIG_SPL_NAND_DRIVERS 144 #define CONFIG_SPL_NAND_SUPPORT 145 146 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 147 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x008000 148 149 #endif 150 151 152 /* mmc config */ 153 #if !defined(CONFIG_UART0_PORT_F) 154 #define CONFIG_MMC 155 #define CONFIG_GENERIC_MMC 156 #define CONFIG_CMD_MMC 157 #define CONFIG_MMC_SUNXI 158 #define CONFIG_MMC_SUNXI_SLOT 0 159 #define CONFIG_ENV_IS_IN_MMC 160 #define CONFIG_SYS_MMC_ENV_DEV 0 /* first detected MMC controller */ 161 #endif 162 163 /* 4MB of malloc() pool */ 164 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20)) 165 166 /* 167 * Miscellaneous configurable options 168 */ 169 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 170 #define CONFIG_SYS_PBSIZE 1024 /* Print Buffer Size */ 171 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 172 #define CONFIG_SYS_GENERIC_BOARD 173 174 /* Boot Argument Buffer Size */ 175 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 176 177 /* standalone support */ 178 #define CONFIG_STANDALONE_LOAD_ADDR CONFIG_SYS_LOAD_ADDR 179 180 /* baudrate */ 181 #define CONFIG_BAUDRATE 115200 182 183 /* The stack sizes are set up in start.S using the settings below */ 184 #define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */ 185 186 /* FLASH and environment organization */ 187 188 #define CONFIG_SYS_NO_FLASH 189 190 #define CONFIG_SYS_MONITOR_LEN (512 << 10) /* 512 KiB */ 191 #define CONFIG_IDENT_STRING " Allwinner Technology" 192 193 #define CONFIG_ENV_OFFSET (544 << 10) /* (8 + 24 + 512) KiB */ 194 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ 195 196 #define CONFIG_FAT_WRITE /* enable write access */ 197 198 #define CONFIG_SPL_FRAMEWORK 199 #define CONFIG_SPL_LIBCOMMON_SUPPORT 200 #define CONFIG_SPL_SERIAL_SUPPORT 201 #define CONFIG_SPL_LIBGENERIC_SUPPORT 202 203 #define CONFIG_SPL_BOARD_LOAD_IMAGE 204 205 #define CONFIG_SPL_TEXT_BASE 0x20 /* sram start+header */ 206 #define CONFIG_SPL_MAX_SIZE 0x5fe0 /* 24KB on sun4i/sun7i */ 207 208 #define CONFIG_SPL_LIBDISK_SUPPORT 209 210 #if !defined(CONFIG_UART0_PORT_F) 211 #define CONFIG_SPL_MMC_SUPPORT 212 #endif 213 214 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds" 215 216 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 80 /* 40KiB */ 217 #define CONFIG_SPL_PAD_TO 32768 /* decimal for 'dd' */ 218 219 /* end of 32 KiB in sram */ 220 #define LOW_LEVEL_SRAM_STACK 0x00008000 /* End of sram */ 221 #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK 222 223 /* I2C */ 224 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER 225 #define CONFIG_SPL_I2C_SUPPORT 226 #endif 227 228 #if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \ 229 defined CONFIG_I2C2_ENABLE || defined CONFIG_I2C3_ENABLE || \ 230 defined CONFIG_I2C4_ENABLE 231 #define CONFIG_SYS_I2C 232 #define CONFIG_SYS_I2C_MVTWSI 233 #define CONFIG_SYS_I2C_SPEED 400000 234 #define CONFIG_SYS_I2C_SLAVE 0x7f 235 #define CONFIG_CMD_I2C 236 #endif 237 238 #if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD) 239 #define CONFIG_SYS_I2C_SOFT 240 #define CONFIG_SYS_I2C_SOFT_SPEED 50000 241 #define CONFIG_SYS_I2C_SOFT_SLAVE 0x00 242 /* We use pin names in Kconfig and sunxi_name_to_gpio() */ 243 #define CONFIG_SOFT_I2C_GPIO_SDA soft_i2c_gpio_sda 244 #define CONFIG_SOFT_I2C_GPIO_SCL soft_i2c_gpio_scl 245 #ifndef __ASSEMBLY__ 246 extern int soft_i2c_gpio_sda; 247 extern int soft_i2c_gpio_scl; 248 #endif 249 #define CONFIG_VIDEO_LCD_I2C_BUS 0 /* The lcd panel soft i2c is bus 0 */ 250 #define CONFIG_SYS_SPD_BUS_NUM 1 /* And the axp209 i2c bus is bus 1 */ 251 #else 252 #define CONFIG_SYS_SPD_BUS_NUM 0 /* The axp209 i2c bus is bus 0 */ 253 #define CONFIG_VIDEO_LCD_I2C_BUS -1 /* NA, but necessary to compile */ 254 #endif 255 256 /* PMU */ 257 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || defined CONFIG_AXP221_POWER 258 #define CONFIG_SPL_POWER_SUPPORT 259 #endif 260 261 #ifndef CONFIG_CONS_INDEX 262 #define CONFIG_CONS_INDEX 1 /* UART0 */ 263 #endif 264 265 #ifdef CONFIG_REQUIRE_SERIAL_CONSOLE 266 #if CONFIG_CONS_INDEX == 1 267 #ifdef CONFIG_MACH_SUN9I 268 #define OF_STDOUT_PATH "/soc/serial@07000000:115200" 269 #else 270 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28000:115200" 271 #endif 272 #elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I) 273 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28400:115200" 274 #elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I) 275 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28800:115200" 276 #elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I) 277 #define OF_STDOUT_PATH "/soc@01c00000/serial@01f02800:115200" 278 #else 279 #error Unsupported console port nr. Please fix stdout-path in sunxi-common.h. 280 #endif 281 #endif /* ifdef CONFIG_REQUIRE_SERIAL_CONSOLE */ 282 283 /* GPIO */ 284 #define CONFIG_SUNXI_GPIO 285 #define CONFIG_SPL_GPIO_SUPPORT 286 #define CONFIG_CMD_GPIO 287 288 #ifdef CONFIG_VIDEO 289 /* 290 * The amount of RAM to keep free at the top of RAM when relocating u-boot, 291 * to use as framebuffer. This must be a multiple of 4096. 292 */ 293 #define CONFIG_SUNXI_MAX_FB_SIZE (9 << 20) 294 295 /* Do we want to initialize a simple FB? */ 296 #define CONFIG_VIDEO_DT_SIMPLEFB 297 298 #define CONFIG_VIDEO_SUNXI 299 300 #define CONFIG_CFB_CONSOLE 301 #define CONFIG_VIDEO_SW_CURSOR 302 #define CONFIG_VIDEO_LOGO 303 #define CONFIG_VIDEO_STD_TIMINGS 304 #define CONFIG_I2C_EDID 305 306 /* allow both serial and cfb console. */ 307 #define CONFIG_CONSOLE_MUX 308 /* stop x86 thinking in cfbconsole from trying to init a pc keyboard */ 309 #define CONFIG_VGA_AS_SINGLE_DEVICE 310 311 /* To be able to hook simplefb into dt */ 312 #ifdef CONFIG_VIDEO_DT_SIMPLEFB 313 #define CONFIG_OF_BOARD_SETUP 314 #endif 315 316 #endif /* CONFIG_VIDEO */ 317 318 /* Ethernet support */ 319 #ifdef CONFIG_SUNXI_EMAC 320 #define CONFIG_PHY_ADDR 1 321 #define CONFIG_MII /* MII PHY management */ 322 #define CONFIG_PHYLIB 323 #endif 324 325 #ifdef CONFIG_SUNXI_GMAC 326 #define CONFIG_DW_AUTONEG 327 #define CONFIG_PHY_GIGE /* GMAC can use gigabit PHY */ 328 #define CONFIG_PHY_ADDR 1 329 #define CONFIG_MII /* MII PHY management */ 330 #define CONFIG_PHYLIB 331 #endif 332 333 #ifdef CONFIG_USB_EHCI_HCD 334 #define CONFIG_USB_OHCI_NEW 335 #define CONFIG_USB_OHCI_SUNXI 336 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 337 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1 338 #endif 339 340 #ifdef CONFIG_USB_MUSB_SUNXI 341 #define CONFIG_USB_MUSB_PIO_ONLY 342 #endif 343 344 #ifdef CONFIG_USB_MUSB_GADGET 345 #define CONFIG_USB_GADGET 346 #define CONFIG_USB_GADGET_DUALSPEED 347 #define CONFIG_USB_GADGET_VBUS_DRAW 0 348 349 #define CONFIG_USB_GADGET_DOWNLOAD 350 #define CONFIG_USB_FUNCTION_FASTBOOT 351 #define CONFIG_USB_FUNCTION_MASS_STORAGE 352 #endif 353 354 #ifdef CONFIG_USB_GADGET_DOWNLOAD 355 #define CONFIG_G_DNL_VENDOR_NUM 0x1f3a 356 #define CONFIG_G_DNL_PRODUCT_NUM 0x1010 357 #define CONFIG_G_DNL_MANUFACTURER "Allwinner Technology" 358 #endif 359 360 #ifdef CONFIG_USB_FUNCTION_FASTBOOT 361 #define CONFIG_CMD_FASTBOOT 362 #define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR 363 #define CONFIG_FASTBOOT_BUF_SIZE 0x2000000 364 365 #define CONFIG_FASTBOOT_FLASH 366 #define CONFIG_FASTBOOT_FLASH_MMC_DEV 0 367 #define CONFIG_EFI_PARTITION 368 #endif 369 370 #ifdef CONFIG_USB_FUNCTION_MASS_STORAGE 371 #define CONFIG_CMD_USB_MASS_STORAGE 372 #endif 373 374 #ifdef CONFIG_USB_KEYBOARD 375 #define CONFIG_CONSOLE_MUX 376 #define CONFIG_PREBOOT 377 #define CONFIG_SYS_STDIO_DEREGISTER 378 #define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE 379 #endif 380 381 #if !defined CONFIG_ENV_IS_IN_MMC && \ 382 !defined CONFIG_ENV_IS_IN_NAND && \ 383 !defined CONFIG_ENV_IS_IN_FAT && \ 384 !defined CONFIG_ENV_IS_IN_SPI_FLASH 385 #define CONFIG_ENV_IS_NOWHERE 386 #endif 387 388 #define CONFIG_MISC_INIT_R 389 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 390 391 #ifndef CONFIG_SPL_BUILD 392 #include <config_distro_defaults.h> 393 394 /* Enable pre-console buffer to get complete log on the VGA console */ 395 #define CONFIG_PRE_CONSOLE_BUFFER 396 #define CONFIG_PRE_CON_BUF_SZ 4096 /* Aprox 2 80*25 screens */ 397 398 /* 399 * 240M RAM (256M minimum minus space for the framebuffer), 400 * 32M uncompressed kernel, 16M compressed kernel, 1M fdt, 401 * 1M script, 1M pxe and the ramdisk at the end. 402 */ 403 #define MEM_LAYOUT_ENV_SETTINGS \ 404 "bootm_size=0xf000000\0" \ 405 "kernel_addr_r=" __stringify(SDRAM_OFFSET(2000000)) "\0" \ 406 "fdt_addr_r=" __stringify(SDRAM_OFFSET(3000000)) "\0" \ 407 "scriptaddr=" __stringify(SDRAM_OFFSET(3100000)) "\0" \ 408 "pxefile_addr_r=" __stringify(SDRAM_OFFSET(3200000)) "\0" \ 409 "ramdisk_addr_r=" __stringify(SDRAM_OFFSET(3300000)) "\0" 410 411 #ifdef CONFIG_MMC 412 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) 413 #else 414 #define BOOT_TARGET_DEVICES_MMC(func) 415 #endif 416 417 #ifdef CONFIG_AHCI 418 #define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0) 419 #else 420 #define BOOT_TARGET_DEVICES_SCSI(func) 421 #endif 422 423 #ifdef CONFIG_USB_STORAGE 424 #define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) 425 #else 426 #define BOOT_TARGET_DEVICES_USB(func) 427 #endif 428 429 #define BOOT_TARGET_DEVICES(func) \ 430 BOOT_TARGET_DEVICES_MMC(func) \ 431 BOOT_TARGET_DEVICES_SCSI(func) \ 432 BOOT_TARGET_DEVICES_USB(func) \ 433 func(PXE, pxe, na) \ 434 func(DHCP, dhcp, na) 435 436 #include <config_distro_bootcmd.h> 437 438 #ifdef CONFIG_USB_KEYBOARD 439 #define CONSOLE_STDIN_SETTINGS \ 440 "preboot=usb start\0" \ 441 "stdin=serial,usbkbd\0" 442 #else 443 #define CONSOLE_STDIN_SETTINGS \ 444 "stdin=serial\0" 445 #endif 446 447 #ifdef CONFIG_VIDEO 448 #define CONSOLE_STDOUT_SETTINGS \ 449 "stdout=serial,vga\0" \ 450 "stderr=serial,vga\0" 451 #else 452 #define CONSOLE_STDOUT_SETTINGS \ 453 "stdout=serial\0" \ 454 "stderr=serial\0" 455 #endif 456 457 #define CONSOLE_ENV_SETTINGS \ 458 CONSOLE_STDIN_SETTINGS \ 459 CONSOLE_STDOUT_SETTINGS 460 461 #define CONFIG_EXTRA_ENV_SETTINGS \ 462 CONSOLE_ENV_SETTINGS \ 463 MEM_LAYOUT_ENV_SETTINGS \ 464 "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \ 465 "console=ttyS0,115200\0" \ 466 BOOTENV 467 468 #else /* ifndef CONFIG_SPL_BUILD */ 469 #define CONFIG_EXTRA_ENV_SETTINGS 470 #endif 471 472 #endif /* _SUNXI_COMMON_CONFIG_H */ 473