xref: /openbmc/u-boot/include/configs/stv0991.h (revision b8098bc1)
1 /*
2  * (C) Copyright 2014
3  * Vikas Manocha, STMicroelectronics, <vikas.manocha@st.com>
4  *
5  * SPDX-License-Identifier:	GPL-2.0+
6  */
7 
8 #ifndef __CONFIG_STV0991_H
9 #define __CONFIG_STV0991_H
10 #define CONFIG_SYS_DCACHE_OFF
11 #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
12 #define CONFIG_BOARD_EARLY_INIT_F
13 
14 #define CONFIG_SYS_CORTEX_R4
15 
16 #define CONFIG_SYS_GENERIC_BOARD
17 #define CONFIG_SYS_NO_FLASH
18 
19 /* ram memory-related information */
20 #define CONFIG_NR_DRAM_BANKS			1
21 #define PHYS_SDRAM_1				0x00000000
22 #define CONFIG_SYS_SDRAM_BASE			PHYS_SDRAM_1
23 #define PHYS_SDRAM_1_SIZE			0x00198000
24 
25 #define CONFIG_ENV_SIZE				0x10000
26 #define CONFIG_ENV_IS_IN_SPI_FLASH
27 #define CONFIG_ENV_SECT_SIZE			CONFIG_ENV_SIZE
28 #define CONFIG_ENV_OFFSET			0x30000
29 #define CONFIG_ENV_ADDR				\
30 	(PHYS_SDRAM_1_SIZE - CONFIG_ENV_SIZE)
31 #define CONFIG_SYS_MAXARGS			16
32 #define CONFIG_SYS_MALLOC_LEN			(CONFIG_ENV_SIZE + 16 * 1024)
33 
34 /* serial port (PL011) configuration */
35 #define CONFIG_BAUDRATE				115200
36 #define CONFIG_PL01X_SERIAL
37 
38 /* user interface */
39 #define CONFIG_SYS_CBSIZE			1024
40 #define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE \
41 						+sizeof(CONFIG_SYS_PROMPT) + 16)
42 
43 /* MISC */
44 #define CONFIG_SYS_LOAD_ADDR			0x00000000
45 #define CONFIG_SYS_INIT_RAM_SIZE		0x8000
46 #define CONFIG_SYS_INIT_RAM_ADDR		0x00190000
47 #define CONFIG_SYS_INIT_SP_OFFSET		\
48 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
49 /* U-boot Load Address */
50 #define CONFIG_SYS_TEXT_BASE			0x00010000
51 #define CONFIG_SYS_INIT_SP_ADDR			\
52 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
53 
54 /* GMAC related configs */
55 
56 #define CONFIG_MII
57 #define CONFIG_PHYLIB
58 #define CONFIG_DW_ALTDESCRIPTOR
59 #define CONFIG_PHY_MICREL
60 
61 /* Command support defines */
62 #define CONFIG_CMD_PING
63 #define CONFIG_PHY_RESET_DELAY			10000		/* in usec */
64 
65 #define CONFIG_SYS_MEMTEST_START               0x0000
66 #define CONFIG_SYS_MEMTEST_END                 1024*1024
67 #define CONFIG_CMD_MEMTEST
68 
69 /* Misc configuration */
70 #define CONFIG_SYS_LONGHELP
71 #define CONFIG_CMDLINE_EDITING
72 
73 #define CONFIG_BOOTDELAY                       3
74 #define CONFIG_BOOTCOMMAND                     "go 0x40040000"
75 
76 #define CONFIG_OF_LIBFDT
77 
78 /*
79 + * QSPI support
80 + */
81 #ifdef CONFIG_OF_CONTROL		/* QSPI is controlled via DT */
82 #define CONFIG_CADENCE_QSPI
83 #define CONFIG_CQSPI_DECODER		0
84 #define CONFIG_CQSPI_REF_CLK		((30/4)/2)*1000*1000
85 #define CONFIG_CMD_SPI
86 
87 #define CONFIG_SPI_FLASH_STMICRO	/* Micron/Numonyx flash */
88 #define CONFIG_SPI_FLASH_WINBOND	/* WINBOND */
89 #define CONFIG_CMD_SF
90 #endif
91 
92 #endif /* __CONFIG_H */
93