xref: /openbmc/u-boot/include/configs/stv0991.h (revision b5493d17)
1 /*
2  * (C) Copyright 2014
3  * Vikas Manocha, STMicroelectronics, <vikas.manocha@st.com>
4  *
5  * SPDX-License-Identifier:	GPL-2.0+
6  */
7 
8 #ifndef __CONFIG_STV0991_H
9 #define __CONFIG_STV0991_H
10 #define CONFIG_SYS_DCACHE_OFF
11 #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
12 #define CONFIG_BOARD_EARLY_INIT_F
13 
14 #define CONFIG_SYS_CORTEX_R4
15 
16 #define CONFIG_SYS_GENERIC_BOARD
17 #define CONFIG_SYS_NO_FLASH
18 
19 /* ram memory-related information */
20 #define CONFIG_NR_DRAM_BANKS			1
21 #define PHYS_SDRAM_1				0x00000000
22 #define CONFIG_SYS_SDRAM_BASE			PHYS_SDRAM_1
23 #define PHYS_SDRAM_1_SIZE			0x00198000
24 
25 #define CONFIG_ENV_SIZE				0x10000
26 #define CONFIG_ENV_IS_IN_FLASH
27 #define CONFIG_ENV_ADDR				\
28 	(PHYS_SDRAM_1_SIZE - CONFIG_ENV_SIZE)
29 #define CONFIG_SYS_MAXARGS			16
30 #define CONFIG_SYS_MALLOC_LEN			(CONFIG_ENV_SIZE + 16 * 1024)
31 #define CONFIG_SYS_MALLOC_F_LEN			0x2000
32 
33 #define CONFIG_DM
34 /* serial port (PL011) configuration */
35 #define CONFIG_BAUDRATE				115200
36 #ifdef CONFIG_DM
37 #define CONFIG_DM_SERIAL
38 #define CONFIG_PL01X_SERIAL
39 #else
40 #define CONFIG_SYS_SERIAL0                     0x80406000
41 #define CONFIG_CONS_INDEX			0
42 #define CONFIG_PL011_SERIAL
43 #define CONFIG_PL01x_PORTS                     {(void *)CONFIG_SYS_SERIAL0}
44 #define CONFIG_PL011_CLOCK                     (2700 * 1000)
45 #endif
46 
47 /* user interface */
48 #define CONFIG_SYS_PROMPT			"STV0991> "
49 #define CONFIG_SYS_CBSIZE			1024
50 #define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE \
51 						+sizeof(CONFIG_SYS_PROMPT) + 16)
52 
53 /* MISC */
54 #define CONFIG_SYS_LOAD_ADDR			0x00000000
55 #define CONFIG_SYS_INIT_RAM_SIZE		0x8000
56 #define CONFIG_SYS_INIT_RAM_ADDR		0x00190000
57 #define CONFIG_SYS_INIT_SP_OFFSET		\
58 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
59 /* U-boot Load Address */
60 #define CONFIG_SYS_TEXT_BASE			0x00010000
61 #define CONFIG_SYS_INIT_SP_ADDR			\
62 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
63 
64 /* GMAC related configs */
65 
66 #define CONFIG_MII
67 #define CONFIG_PHYLIB
68 #define CONFIG_CMD_NET
69 #define CONFIG_DESIGNWARE_ETH
70 #define CONFIG_DW_ALTDESCRIPTOR
71 #define CONFIG_PHY_MICREL
72 
73 /* Command support defines */
74 #define CONFIG_CMD_PING
75 #define CONFIG_PHY_RESET_DELAY			10000		/* in usec */
76 
77 #include "config_cmd_default.h"
78 #undef CONFIG_CMD_SAVEENV
79 
80 #define CONFIG_SYS_MEMTEST_START               0x0000
81 #define CONFIG_SYS_MEMTEST_END                 1024*1024
82 #define CONFIG_CMD_MEMTEST
83 
84 /* Misc configuration */
85 #define CONFIG_SYS_LONGHELP
86 #define CONFIG_CMDLINE_EDITING
87 
88 #define CONFIG_BOOTDELAY                       3
89 #define CONFIG_BOOTCOMMAND                     "go 0x40040000"
90 #define CONFIG_AUTOBOOT_KEYED
91 #define CONFIG_AUTOBOOT_STOP_STR               " "
92 #define CONFIG_AUTOBOOT_PROMPT                 \
93 	"Hit SPACE in %d seconds to stop autoboot.\n", bootdelay
94 
95 #endif /* __CONFIG_H */
96